Jump to content

Recommended Posts

Posted

What kinds of things are you all using these days to protect your interiors when transporting dogs? I previously had a Suburban with a package that covered everything including side paneling in the back, but now I'm trying to determine if there is anything what actually works well to protect nice leather benches, rear seat backs, door panels, backs of front seats, etc. Any help would be appreciated, and pics would sure help me envision what I need.

Posted

I used a Weathertech seat protector and GM floor liners. Our German Shepard was sickly his last two years and made several messes. The seat protector contained all the mess and with a little soap then rinse with a hose and line dry ready for another mess. The floor liners work great for the little that he spread around. Paper towels and Fantastic or similar product worked great. 

I was a little concerned when I bought the seat protector as it had seat belt holes closed with hook and loop fastening system. No leakage or issues with that.

I don't have any recommendations for seat backs or door panels. 

Posted

OK, Joe, thanks so much for the feedback. I, too, am partial to German Shepherds, so your "review" of the seat protector says a lot. 

Posted (edited)
5 hours ago, MrLeadFoot said:

What kinds of things are you all using these days to protect your interiors when transporting dogs? I previously had a Suburban with a package that covered everything including side paneling in the back, but now I'm trying to determine if there is anything what actually works well to protect nice leather benches, rear seat backs, door panels, backs of front seats, etc. Any help would be appreciated, and pics would sure help me envision what I need.

We have used this company's products in our 16 Tahoe, and currently in our 23 Yukon, good quality and fit.

 

image.thumb.png.6783fccae4374d70045ef09a4e60e404.png

Edited by JimCost2014
Posted
15 hours ago, JimCost2014 said:

We have used this company's products in our 16 Tahoe, and currently in our 23 Yukon, good quality and fit.

 

image.thumb.png.6783fccae4374d70045ef09a4e60e404.png

This is the kind of thing I had for my Suburban, too, tough canvas. Unfortunately, the company you referred to doesn't make anything that covers everything for my truck.

Posted
21 hours ago, JP642 said:

I use one-piece husky floor liner across the back, a Duluth deluxe seat saver (https://www.duluthtrading.com/s/DTC/deluxe-seat-saver-96000.html?color=GRA) and a cover/pad for the front center console (co-pilot seat for the dog)

I put down a towel over the seat saver to make more comfortable for dog and catch dirty paws - no solution for keeping nose prints of the glass though

Thanks for the info!

  • 1 month later...
Posted
On 12/21/2025 at 6:30 AM, G$$Money said:

I use this Ruff Liner.  covers everything. They also have the same thing in a version that goes all the way to the floor if you have the seats up. Works great! https://www.amazon.com/Ruff-Liners-Large-Extender-Version/dp/B0DSJYZD94?ref_=ast_sto_dp&th=1

81AkrpostLL._AC_SL1500_.jpg

 

Is the bottom, where it extends past the bench, strong enough to hold a German Shepherd? Or, would I need to add upright supports?

 

I also wish they made them so they cover the backseat headrests and go up the back of the front headrests. I guess I can probably make something for the back of the front headrests myself, if necessary.

Posted

It has plastic trim pieces that insert into the window channel then the door covers velcro to the plastic pieces. 

 

The bottom is a hard deck so the part that overhangs is rigid. I have 2 84lb Aussies. No problems. The deck is split into 3 sections sealed inside the fabric. So it folds up into a square when not in use. Has a carry bag it all fits in to.

Posted (edited)
1 hour ago, G$$Money said:

I have 2 84lb Aussies.

Is that a typo? I ask, because as a professional dog trainer for 40 years, I've done everything from patrol dogs to service dogs to family dogs, worked with thousands of dogs across all breeds and sizes from Yorkies to Malinois to Mastiffs to Russian Ovcharkas, and I've never encountered any Aussies that heavy. Then again, you could have world record holders. Just curious. 

Edited by MrLeadFoot
Posted

Yes.. its right.. bear is 1.75 inches larger than the standard, he weights 84. Micah is smaller and is only slightly larger than the standard (same parents, different litters) and he weighs 79. He is a little tubby though! Lmao

Posted

Wow, Bear is bigger than most Belgian Malligators, and rivals German Shepherds! Sorry, didn't mean to jack my own thread! 🤪

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • 2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers
    • And use RA's 5% discount code if you buy from them.  google for the code, one is always available.
    • Just don't turn the steering wheel as much?
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...