Jump to content

I would've fryed the cat


asilverblazer

Recommended Posts

Posted

Dear Friends,

 

My girlfriend is fond of saying that my last words on this earth will be something akin to "Well, I have out done myself once again." No doubt you will see this true story chronicled in a Life Time movie in the near future. Here goes.

 

Last weekend I spied something at Larry's Pistol and Pawn that tickled my fancy. (Note: Keep in mind that my "fancy" is easily tickled). I bought something really cool for her. The occasion was our 2nd anniversary and I was looking for a little something extra for my sweet girl.

 

What I came across was a 100,000-volt, pocket/purse-sized Tazer gun with a clip. For those of you who are not familiar with this product, it is a less-than-lethal stun gun with two metal prongs designed to incapacitate an assailant with a shock of high-voltage, low amperage electricity while you flee to safety. The effects are supposed to be short lived, with no long-term adverse affect on your assailant, but allowing you adequate time to retreat to safety. You simply jab the prongs into your 250 lb. tattooed assailant, push the button, and it will render him a slobbering, goggle-eyed, muscle-twitching, whimpering, pencil-neck geek. If you've

never seen one of these things in action, then you're truly missing out--way too cool!

 

Long story short, I bought the device and brought it home. I loaded two AAA batteries in the darn thing and pushed the button. Nothing! I was so disappointed. Upon reading the directions (we don't need no stinkin' directions), I found much to my chagrin that this particular model would not create an arch between the prongs. How disappointing! I do love fire for effect. I learned that if I pushed the button, however, and pressed it against a metal surface that I'd get the blue arch of electricity darting back and forth between the prongs that I was so looking forward to. I did so. Awesome!!! Sparks, a blue arch of electricity, and a loud pop!!!

Yipeeeeee . . I'm easily amused, just for your information, but I have yet to explain to her what that burn spot is on the face of her microwave.

 

Okay, so I was home alone with this new toy, thinking to myself that it couldn't be all that bad with only two triple-a batteries, etc., etc. There I sat in my recliner, my cat looking on intently (trusting little soul), reading the directions (that would be me, not the cat) and thinking that I really needed to try this thing out on a flesh and blood target. I must admit I thought about zapping the cat for a fraction of a second and thought better of it. She is such a sweet kitty, after all. But, if I was going to give this thing to my girl friend to protect herself against a mugger, I did want some assurance that it would work as advertised. Am I wrong? Was I wrong to think that? Seemed reasonable tome at the time.

 

So, there I sat in a pair of shorts and a tank top with my reading glasses perched delicately on the bridge of my nose, directions in one hand, Tazer in another. The directions said that a one-second burst would shock and disorient your assailant; a two-second burst was supposed to cause muscle spasms and a loss of bodily control; a three-second burst would purportedly make your assailant flop on the ground like a fish out of water.

 

All the while I'm looking at this little device (measuring about 5" long, less than 3/4 inch in circumference, pretty cute really, and loaded with two itsy, bitsy AAA batteries) thinking to myself, "no friggin' way!" Friggin' way - trust me, but I'm getting ahead of myself.

 

What happened next is almost beyond description, but I'll do my best. Those of you who know me well have got a pretty good idea of what followed. I'm sitting there alone, my cat looking on with her head cocked to one side as to say, "don't do it buddy," reasoning that a one-second burst from such a tiny lil' ole thing couldn't hurt all that bad (sound, rational thinking under the circumstances, wouldn't you agree?). I decided to give myself a one-second burst just for the hell of it. (Note: You know, a bad decision is like hindsight-- always twenty-twenty. It is so obvious that it was a bad decision after the fact, even though it seemed so right at the time. Don't ya hate that?)

 

I touched the prongs to my naked thigh, pushed the button, and HOLY *********! DAaaaauuuuuuMN!!! I'm pretty sure that Jessie Ventura ran in through the front door, picked me up out of that recliner, then body slammed me on the carpet over and over again. I vaguely recall waking up on my side in the fetal position, nipples on fire, testicles nowhere to be found, soaking wet, with my left arm tucked under my body in the oddest position. Cat was standing over me making meowing sounds I had never heard before, licking my face, undoubtedly thinking to herself,

"do it again, do it again!" (Note: If you ever feel compelled to mug yourself with a Tazer, one note of caution. There is no such thing as a one-second burst when you zap yourself. You're not going to let go of that thing until it is dislodged from your hand by a violent thrashing about on the floor. Then, if you're lucky, you won't dislodge one of the prongs 1/4" deep in your thigh like yours truly.)

 

SON-OF-A-***** that hurt! A minute or so later (I can't be sure, as time was a relative thing at this point), I collected my wits (what little I had left), sat up and surveyed the landscape. My reading glasses were on the mantel of the fireplace. How did they get there??? My triceps, right thigh and both titties were still twitching.

My face felt like it had been shot up with Novocain, as my bottom lip weighed 88 lbs. give or take an ounce or two, I'm pretty sure. By the way, has anyone seen my testicles? I think they ran away. I'm offering a reward. They're round, rather large, kinda hairy, and handsome if I must say so myself. Miss 'em . . . sure would like to get 'em back.

 

Prolly on here before if so my apologies.

Posted

:lol::crazy::D:D you should have seen this guy that I worked with when he hit himself with a cattle prod. I think they carry about 10 times the shock of a tazer. Anyway it shot him back about 6 or 8 feet and he must have wet himself somewhere in midflight. either way it was very entertaining. :sigh: For some reason I always find others pain funny.

P.S. I'll keep an eye out for yer nutz( I hope I don't see em though)

Thanks for the laughs man very entertaining :flag:

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,840
    Total Members
    8,960
    Most Online
    appletrav
    Newest Member
    appletrav
    Joined
  • Who's Online   4 Members, 0 Anonymous, 294 Guests (See full list)

  • Latest Articles

  • Posts

    • It is possible to add your own 12v outlet to your truck.  Check out this video:   I verified via GM Upfitters that pin 31 is the same on the 1500 trucks.  The wire is GM part number 84779405.   You can get the GM 12v outlet from Amazon  https://www.amazon.com/Genuine-Accessory-Receptacle-25774623-13549530/dp/B0F1H9YRGF EWAY 12 Volt Power Adapter for GM   https://www.amazon.com/EWAY-Chevrolet-Silverado-Cigarette-Ignition/dp/B0915RRW6Q/ref=sr_1_1?   I just haven't figured out a good place to put the 12v outlet in my truck.   Some people are getting USB-C to 12V adapters  https://www.amazon.com/WYMECT-Cigarette-Lighter-Socket-Adapter/dp/B0F87WNQKB/ref=sr_1_1_sspa? Not sure if they provide the correct amperage that a device like a tire inflator would need.  
    • Thanks; I looked there a few minutes, and I think I can find something. I really never looked there, as I thought it was stuff like PTO/aftermarket bodies/accessories like snow plows.
    • This is a 1/2 ton thing ONLY.  All HDs 2020-2026 have the two speed transfer case, with Autotrac as an option.     1/2 tons 2019-2026, regular 4x4s come with a single speed case (no 4LO!), and trucks with Z71 ordered, or all Trail Boss trucks come with the 2 speed case.  2 speed case is also an option on WT, and is also standard on High Country.  
    • 2013 5.3 still to this day calls for the PF48 filter.  Which as a 15psi bypass pressure.     There is a TSB, 17-NA-157 that talks about the PF-63 and PF-64 filters which have a higher bypass rating of 22psi.    TSB HERE - temp.xml   "Beginning in 2012, the oil pumps began to regulate main gallery feedback instead of pump out pressure. This means that the oil pump now does not begin to regulate until pressure is built up to the main gallery. This change reduces the amount of time it takes to provide oil to the engine bearing and lifters during extreme cold start conditions.  Main gallery feedback oil pump control systems are present on the following engine families which use Spin-on oil filters: Small Gas Engine (SGE), Large Gas Engine (LGE), High Feature (HFV6) Gen2 and Small Block Gen5 gasoline engines. These engines with the main gallery feedback oil pump control systems are factory built with an ACDelco® oil filters"   It also calls out what engines use those filters.  The gen 4 small blocks were not on that list (LMG, LC9, L9H, L92, L94, L20, L96).  Gen 5 small blocks use the higher pressure filter.          That all said...   Your 7045 Napa filter is the PF63 equivalent, with 22psi bypass.  You are already using the higher bypass pressure filter.  You CAN keep using it, you don't technically have to use it though.  
    • Do you know WHY the filter relief setting was increased to 22 psig?    When the new system goes into the second stage the pump volume ramps up considerably. It was found that the 15 psi filter bypass setting put the filter in bypass on a warm engine when the second stage was activated. Raising the filter bypass setting forced the filter to do what it designed to do. Filter. Preventing debris from circulating during high load, high rpm operation.    So next question is how did GM find this out? VLOM/lifter failures and a deep dive by Melling Corp.    Last question. Is it required? Look at it like this; a motor may be equipped with a rev limiter. But it only works if the set point in reached. That 22 psig setting only matters if the pressure differential across the filter media exceeds 15 psig during normal warm operation. Second stage kicks in around 3000-3500 rpm.    I can't answer your question because I don't know you and how you use the truck. But I think there is enough information here to let you decide for yourself. 😉
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...