Jump to content

My 00 2wd

Radon

By Radon
in Hobbies, Tech & Outdoors

Recommended Posts

Radon Enthusiast

Radon

Posted
  • Author
Posted
Those 33's should look sweet.  How much was that husky box?  Ive been thinking its time for a new one.

 

 

 

 

 

couldnt tell you how much my parents spent on the box, but i know that they got it at tractor supply and that mine is a "low proile" model. it is perfect for golf clubs and a few tools.

gmcsierra01 Enthusiast

gmcsierra01

Posted
Posted

Thanks for posting pics. :cool: 3in lift hmm..I think I'm going to order mine soon, after seeing it. Looks good, did you install the liftkit yourself ? If so is it easy to install, I have installed suspension kits before but never on a truck mostly on imports.

Radon Enthusiast

Radon

Posted
  • Author
Posted

Yeah I put it on my self, but I was in a professoinal garage. The hardest part was taking off the original knuckles, a 8ft prybar and some not so gentle persuasion did the trick. On a side note: finding a place to do the alignment may be harder than you think, not every shop can align a lifted truck.

gmcsierra01 Enthusiast

gmcsierra01

Posted
Posted
Yeah I put it on my self, but I was in a professoinal garage. The hardest part was taking off the original knuckles, a 8ft prybar and some not so gentle persuasion did the trick. On a side note: finding a place to do the alignment  may be harder than you think, not every shop can align a lifted truck.

 

 

 

 

Thanks for the heads up, I think I know a few shops that can align lifted truck in my area.

  • 5 weeks later...
  • 3 weeks later...
Radon Enthusiast

Radon

Posted
  • Author
Posted

it drove fine, like stock. but i did have to shave down the steering rod where it connects to the spindel. it wouldnt clear the wheel.

Radon Enthusiast

Radon

Posted
  • Author
Posted

no sound clips, sorry. i will say however that i wish i had gone with a true dual setup though, not that there is a thing wrong with the flowmaster i have now.

  • 4 months later...
Radon Enthusiast

Radon

Posted
  • Author
Posted

I went out and finally got those BFG's I've been wanting for a while. I settled on the 265's and not the 285's, I think I made the right choice for my truck. Like everyone else I love them. I also think I'm about done with this truck as far as mods go, I'll get back at it if I ever get a 4wd one. Anyway enjoy.

 

chamois_-_bfg_frot_angle_resiz.jpg

chamois_-_bfg_low_resize.jpg

chamois_-_bfg_far_back_resize.jpg

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Gas Prices

      By Atlas · Posted

      I recall paying $5.00/gallon in 2007 as well, although, different circumstances. A severe windstorm followed by a rare ice storm knocked out power in our region for days. We had a gas generator keeping the fridge cold and our furnace on power, and fuel stations either didn't have power, or didn't have gas because deliveries were delayed because of the storms. Driving around, we found one station that didn't have power but had a sandwich board set up out front. $5.00/gallon. They were hand-pumping it out of the underground tanks. I'm not sure that was legal or even advisable, but we needed it, and they had it. So we filled up. I was just out of college, just bought our house. Times were tight so $5.00 felt really outrageous. Local supermarkets couldn't keep stuff cold so they were basically giving food away. Fridge/freezer cases were literally being emptied out before the food expired. Never seen anything like it before, and until this day this event serves as the boilerplate for our winter storm prep.
    • newdude
      Will not stay in Reverse

      By newdude · Posted

      Have you spilt anything on the console during ownership?  Water, coffee, soda, juice, etc.?   GM has been seeing contaminated console shift controls causing all sorts of issues.  Requires replacing the shift control.
    • Byrds8
      Remote Start Noise 2024 2500 HD Gas

      By Byrds8 · Posted

      If it's something they cannot figure out they can contact GM. They have a case open for noise in the suspension and my whistling drivers mirror they cant figure out how to fix.
    • Jsdirt
      What did you do to your "other" car (aka musclecar) today

      By Jsdirt · Posted

      Thing is gorgeous! Definitely been a LONG time since I've heard that sound!      I wouldn't call myself a purist, since I'll throw Wilwoods and power adders on anything. For me, that engine makes me cringe as a former shop owner remembering all I've been through with some of them. Plus I hate LS engines for their oiling system (MANY places to lose pressure from, especially on the AFM ones which I wouldn't be caught dead with), and the dowel-less front and rear covers - an engineering decision that irks me to no end! And I despise electronics with every fiber of my being.   My main reason for avoiding modern electronics is that when they fail, they typically leave you stranded. Tied for 1st place is also the fact that sometimes troubleshooting super-annoying problems can suck the life right out of you. I've wasted so many hours of my life chasing gremlins on those in all kinds of vehicles. I find carburetors and simple HEI style components much more suitable for keeping my sanity, lol. Different strokes for different folks. I probably get more hate from the younger crowd for sticking with my old school ways of thinking than you would for doing an LS swap.   When everything's working, they're certainly a ton of fun! 
    • davester
      Scan Equipment for 2024 2500 HD 6.6 Gas

      By davester · Posted

      I have an Edge Insight CTS2 in my '04 3500, and find it works well.  Only real problem I have with it is the obdii connector will work itself free over time, so it stops working and also freaks out the trucks electronics for a bit.  Remove and plug it in and it's good to go.  More recently, I've taken to zip-tying it in place which also seems to work.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...