Spray-in bed liners?

atrautweiler · October 25, 2001

I have read several posts about these products. I'm sure it is what I want but which, I can't say. I would like to know what the differences are, if any, between Herculiner, Line-X, and, Rhino Liner.

XSaNiTy · October 25, 2001

there is a $300 difference between herculiner and all the others, but you must invest multiple hours of your own time to do it yourself. if done correctly, it does look good. line-x seems to have a finer grit, while the rhino is more abrasive with a rougher texture. seems every liner has its own traits. i recomend the herculiner for the money, although a professional job would look a little better.

TxDoc · October 25, 2001

Just to throw another option into the mix. SpeedLiner has a tensile strength of 4,200 psi and a tear strength of 610 lbs/in compared to 2200 psi. SpeedLiner can be made in any color, even two-tones or graphics and is color stable, and is a non-skid textured surface.

www.speedliner.com

Having said that. I don't think you can go wrong with any of your choices or suggestions. We don't have a Line-X dealer here, but have three SpeedLiner dealers. Probably so, since they are in Houston, TX. I have seen RhinoLinings, Line-X, and Herculiner-equipped trucks and they look fine, too.

LarryE · October 28, 2001

imo you can't beat line-x, it is super thick, color matchable, and if you cut it, it folds up on itself hiding the scratch

Stepside Z · October 28, 2001

:stupid: I have had both line-X and Rhino Liner and I like Line-X much better. A buddy of mine has the Herculiner and it seems to scratch too easy.

pacodiablo · October 28, 2001

if i do this mod to my truck than i will defiately go with line-x

Shaners · October 28, 2001

There is another franchise around here and I think it is called Arma Coating. I've seen their finished product and I think it is every bit as good as LineX or Rhino.

One thing about these spray-in liners is that they are only as good as the person doing the job. Depending on where you take your truck, you should look at some of the ones they've done previously.

99silveradoz71 · October 29, 2001

First post on the forum...I have a 99 silverado z71 in Indigo Blue that I got a Permatech spray-on done on. They offered color match which turned out nicely. It's not a dead match, but it blends in with the blue truck nicely. I don't know all that much about the differences between brands, but I will say if you plan on hanging onto your truck and want to be able to haul a wide variety of items with no worries, go with a spray-in liner. I've had firewood, lawn care equipment, etc in the back with no problems. Spilled gas or oil is quickly cleaned up with no problems.

Bill

chevy4x4trucks · October 29, 2001

Quote from Shaners, posted on Oct. 28 2001,5:42

There is another franchise around here and I think it is called Arma Coating. I've seen their finished product and I think it is every bit as good as LineX or Rhino.

One thing about these spray-in liners is that they are only as good as the person doing the job. Depending on where you take your truck, you should look at some of the ones they've done previously.

I had mine done at an Arma-Coatings off of 164 in Waukesha. I've got to say top notch job, I've had it for over a year and no scratches in it at all. Plus they said if it does scratch just take it in and they'll repair it for free for the life of the vehicle. Also, they did a great job, nice straight edges and it's sprayed on real thick.

Shaners · October 29, 2001

No matter who you have do the job for you, make sure you have the bed-bolts removed and the holes plugged before the spray-job. Then remove the plugs and put the bolts back in. That way if you ever need to get them out again you'll be able too...

chevy4x4trucks · October 29, 2001

Shaner's is right, don't let them coat over the bolts for the tailgate handle. If they do, you'll have a lot of trouble if you want to fix the handle or ever need to get at it. Make sure you look at the type of job the place does. I went to one place and saw the job he did on his own vehicle and judging by that decided that there was no way I'd get it done there. I figured he'd do the best job on his own truck and if that was his best job, I'd be better off doing it myself. Arma-Coatings ended up being the highest quality and also the best price. No complaints about the job they did and I would highly recommend the shop that did it to everyone in the milwaukee/waukesha area.

Kansas Kid · October 29, 2001

One other thing to make sure you do, is have any wholes drilled in the bed for accesories you plan on mounting in there so the bare metal from the holes will be covered. Very good for rust prevention. Mainly stuff like holes for a gooseneck, 5th wheel, bed mounted fuel tanks or tool boxes, trailer wiring, etc. You may not plan on any of that stuff, but just wanted to point that out.

Sierra Sam · November 1, 2001

I have the Rhino lining myself, and have been happy with it. One other option you might consider is the Bed Rug. I really like the way they look and people who have them swear by them. Plus, you can buy them on sale for $280-300. I'm thinking about getting one on top of the Rhino lining, mainly for looks.

chevy4x4trucks · November 1, 2001

Quote from Sierra Sam, posted on Nov. 01 2001,1:14

I have the Rhino lining myself, and have been happy with it. One other option you might consider is the Bed Rug. I really like the way they look and people who have them swear by them. Plus, you can buy them on sale for $280-300. I'm thinking about getting one on top of the Rhino lining, mainly for looks.

I was looking at a bed rug, when I get a hard toneau cover, just for looks. How good are they if you're hauling stuff back there. I'm guessing that the cargo won't slide as much.