So after about 40k miles I'm down to 8/32" and getting noisier every day.
What I've learned:
1. Keep your tires at 50/45 unless you're towing or hauling for best fuel economy and even tire wear. (mpg is 19@77 and 21 @ 75)
2. 0-60 goes from ~5.5 to ~7.0
3. Airing down on the beach is optional but still results in a much easier time.
4. Ride is still great up to about 70...then (as my son states) feels like riding on cobblestone streets.
5. Offroad traction...great. On-road in the wet...not so much.
Now off to selecting another tire...maybe pirelli scorpion xtm at?
Exactly what it is. Remove the drive shaft, clean it with brake cleaner and put new grease back in it the yoke. Mine would make the noise shifting and even driving over bumps.
https://youtu.be/L5-Dt2RdmbU?is=iYsoJ-0nWdrGgn2-
Survey says yes based on the first engine to be released for the Gen 6 engines, the LS6 in the 2027 Corvette.
LS6 has DFM. Lifter QC and construction has been improved (better/larger locking pin). Bottom end has dual oiling circuits instead of one like on the gen Vs.
The internet (i.e. Facebook) sleuths saw that patent for a rocker arm cylinder deactivation on a pushrod engine and is running wild that all of the Gen 6s will have this when so far...none do.
Service manual, parts catalog, etc. on the LS6, its got 16 active lifters and has DFM.
I toggled my updates off a couple of years back. Since I don't have any CEL activity and the truck runs fine I'm happy to refrain from rolling the dice. I figure they've got it as good as it's gonna get. Recalls are another matter and I will strongly consider those if I get a notice in the mail.
Recommended Posts
Archived
This topic is now archived and is closed to further replies.