Jump to content

And one became two


Shaners

Recommended Posts

Posted

Well,  I just bought a '72 candy yellow Honda Trail 70 Automatic, (clutchless 3-speed), and today I found and bought the other '72 model a 4-speed with a hand clutch in candy apple red.  So now I have one of each model and each color.

 

They are both good winter projects, and aren't mint condition, but they are decent riders that I will fix up over the next few years.

 

The best things about these bikes is that they are appreciating in value, and that every dollar you throw at them, you get a dollar back!!!  So it is a win/win situation, and now I have three great bikes in my garage and they are all classics...  (The two '72 trail 70's and my (1 of 500 US model) 1993 GTS1000 Yamaha) .

Posted

I'm not an expert on these bikes, but I believe my dad has one sitting back in the weeds somewhere.  I remember riding on it when I was little.  I also remember the exhaust pipe burns on the inside of my lower legs!  He used it to chase livestock around the farm quite a bit.  Worked great and in places a pickup couldn't go due to rocks and other obstacles.  

 

The last I remember, we tried to pull start it but it wouldn't fire.  I'm sure it's locked up.  I should get that from him and see what I can do with it.  BTW, it's blue.  I have no idea what year it is or have any other details though.

 

A neighbor of my parents also has a 50 and I think he has a 70 too.  Both in very good condition and never get rode.  Sit in the shop and collect dust.

Posted

These bikes are worth some cash!!!  Maybe you should get ahold of that bike and fix it up.  That blue bike is a 69-71 model with the speedo in the headlight bezel.

 

Here is a pic of of a similar bike to what I got today....  This is not mine, and it is alot rougher than the one Ibought, but the gy wants a grand for this one....  (dream on)

 

1972K116.jpg

Posted

Here is a pic of the bike I bought today!!!  The paint is badly faded, but otherwise it will be an easy restoration project.

 

00257904008.jpg

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Correct.  2019-2021 model years are serviced by a different p/n.  19420611.  Recall 2021s use 19420611.   The recall engines 2022-2024 model years are serviced with 12740076.     The difference between 19420611 and 12740076 is GM changed injector size for 2022.  The injectors are smaller on 12740076 with smaller injector bores in the cylinder heads to match the smaller injectors.  So you can't install a 19420611 in a 2022-2024, and you can't install a 12740076 in a 2019-2021.     Both engines are the replacement engine p/ns that are in the L87 recall.  So both of these are the updated engines.     Here's a version of the L87 recall with the p/ns for all the parts needed.    RCRIT-25V274-7075.pdf   Note it shows 19420611 and 12740076 with an asterisk to a footnote "Use the VIN and the GM Electronic Parts Catalog (EPC) to determine which part to order if two or more part numbers are listed for the same part, as it may vary by vehicle options."    
    • Looking for advice from this group. Took my flawless 2020 6.2 TB to an unnamed shop for routine rear brakes and oil change. Tech forgot to put oil back in after the full service and needles to say, destroyed my engine.  It’s all on their shop video so they are responsible.   I had my Chevy dealer do the analysis and they confirmed its compromised and said engine replacement. The manager said they only get GM reman engines from GM with full 3 yr warranty and the one they would put in is not same as what’s they are swapping out on 21-25 for recall.    I am looking for advice why that would be a different engine because obviously I had the good 6.2 year and replacing it has my concerns with that recall for 21-15   Also what’s the pros and cons of accepting the engine swap vs telling the shop that bricked the truck to pay up so I buy a new truck. I’m concerned about stigma resale eventually if I just decide to get rid of it after the swap or other issues showing up after the swap out.  
    • Just looked up my records.  I've never gone over 5000 miles between oil changes.  At 46K miles, I have 10 oil changes.  I hope that will help.  I also installed the disabler last year.  I've still had a few times when it didn't seem to engage (which I can tell because the start stop feature kicks in), but for the most part, I think it's working.  For some reason, GM did not include the number of cylinders running in the information screen like I had on other models.  In my Cadillac, it shows me when it's running on 4 cylinders on the fuel milage screen.  I can't find that on my '21 Denali.
    • you might read through the info on gmupfitter.com for your truck, to find a good power source.
    • Melling I believe is/was the OEM on the lifters who explored this problem some years ago. The white paper they generated on the topic indicated two items of note when I read it. 1.) They only fail on the switch. Prevent the switch, prevent the failure. 2.) The majority fail due to deposits messing up the timing of that switch. Anyway that's what I got from it.    Mine have always been active, 195K+ now, and my oil maintenance is surgically clean.    Of course this assumes good parts. That is no heat treat issue or machining flaws. I get comfortable that these issues are in the rearview mirror by about 30K. IMHO naturally. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...