Jump to content

Recommended Posts

Posted (edited)

 

Thank you! I had every intention of getting a white frost but fell in love with the crimson once I saw it. :)

 

Believe it or not they are Pilot brand I picked up at Wal-Mart for less than 9 bucks. My cargo and backup lights are JDM ASTAR that a buddy of mine recommended but they are too large for the license plates. These fit perfectly and I feel are the right amount of brightness, and hey it's Wal-Mart if they fail I'll take them back! :cheers:

 

Looks great! Do u have a link or specific number for the JDM reverse/cargo lights?

 

And nvm I see the link u posted a few pages back

Edited by cjz28
Posted

K ordered em thanks! They both say reverse lights though... That doesn't matter?

Sure thing, I think you'll be very happy! I used the 2nd ones for cargos because they are a little shorter and fit in the lamp better...the others fit well in the backup light and I feel are a little brighter. Thanks!

 

Sent From My Galaxy S6 Edge+

  • Like 1
Posted

Finally got some tires on! Super stoked with how it came out. Just need to give her a bath when I get home.

 

3E6464A7-C6AE-4765-9F64-62E48A61712F.jpg

580B6784-C05A-4DFB-85CD-6AA6A0E0F738.jpg

  • Like 4
Posted

Finally got some tires on! Super stoked with how it came out. Just need to give her a bath when I get home.

 

3E6464A7-C6AE-4765-9F64-62E48A61712F.jpg

580B6784-C05A-4DFB-85CD-6AA6A0E0F738.jpg

what tire set up did you end up going with?

  • Like 1
Posted

what tire set up did you end up going with?

295/55/20 Toyo AT2. The 305's were going to rub like crazy.

Posted

295/55/20 Toyo AT2. The 305's were going to rub like crazy.

Tires look good!

Posted

ce7d65aea993a91c23e3f5daa7c7ac20.jpg

 

Got a set of 275/55/20 duratracs on and installed airraid intake this weekend. Next up is the 2" rc level and 30 inch light bar. They are just sitting at my house need to find the time to put them on!

 

Sent from my SAMSUNG-SM-G900A using Tapatalk

  • Like 1
Posted

Too bad my truck was dirty yesterday, one of my customers sweet C10 is in the shop for a full Willwood big brake kit.

 

0328161657_zpscfxe7skb.jpg

 

0328161657a_zps1yyrd5vl.jpg

  • Like 7
Posted

v8k70o.jpg

2h7o0g4.jpgx4hfg7.jpg

Nice looking Truck!!! Where did you get the black Sierra door emblems? I have looked online and ordered some off Ebay but they are not aligned properly to "just stick on the door". Looking for Black Denali door emblems as well. Thanks!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,764
    Total Members
    8,960
    Most Online
    Tbhats2130
    Newest Member
    Tbhats2130
    Joined
  • Who's Online   5 Members, 0 Anonymous, 1,109 Guests (See full list)


  • Latest Articles

  • Posts

    • Google converting 98 4.3 spider injection to carburetor if all else fails. 
    • My centre console USB ports haven’t been working and the one in the glovebox is starting to act up. When I plug my phone into the cord the radio will go black and stop playing, and the CarPlay is inconsistent.   I checked the fuses and they were fine. I changed the USB port out and still nothing. Hoping for some advice on what I should be looking at.  
    • The truck is a 1995 Chevrolet S10 Blazer, 4.3 VIN "W" engine. :cracks knuckles:   On a whim - because I needed a headache - this truck was for sale so I stopped to take a look. Doesn't run. Well, it does, but barely. Long crank, choppy idle, bad misfire(s), it REEKS of fuel. I can DO this..I'm thinking. Diamond in the rough. One owner until last year. A young guy is selling it, he bought it 6 months ago. It stranded him more than once, he's got a newborn. It was in the shop 10 days ago and he "thinks" they said it needs a new fuel injection system. He can't put any more money into it, needs it gone. I was thinking of upgrading my Macbook, which is a total want, not a need. For less than the price of a new laptop I can have fun for months tinkering on this truck and enjoying it. I'm taking this truck home. The guy was beyond thrilled, his wife was there, she thanked me profusely, I could tell they were hurting. They seemed like good people in a bind.   Some parts, a wash, maybe a set of tires, and I can have a few months of fun and then turn it for beer money (or the next project).   Sure enough, there's a work order from a shop last week in the INCHES of paperwork on this truck dating back to when the first owner bought it. They put a new distributor in it, fuel injection work describes basically opening the plenum and putting it back together. He said he couldn't afford any more work so he had them button it up and that's when he put it up for sale.   I'm not well versed in 4.3. I did discover 1995 uses the 1992-1995 SCPI "Spider" injector which is riddled with issues from splitting lines, clogged or cracked poppet valves and plastic spider legs that crumble over time. Cool. I'll just order me a ne---. Oh, the auto parts store doesn't have it? Rock Auto doesn't have it. eBay? $$$$$$ for used. These are UNAVAILABLE period end of story unless you know "a guy" who's still got one in a box somewhere.   Can't upgrade to the '96-'04 injector, it's a different plenum, wiring/pinout and sensor config.   There are a few kinda "know a guy" -guy rebuild services for these injectors out there for about $350. Okay, Okay... I'd like to know if anyone has used them? Anyone got a lead on these crappy 92-95 spiders?   I also don't want to send MY spider to Narnia and back without knowing if that's truly the problem. I guess I'll need to pull apart the plenum and do some digging.   I was also thrown for a loop. This 1995 model year truck has an OBD-II connector. The interface is decidedly not OBD-II. I can read and reset trouble codes and view live data, but there's not a lot of data. Like misfire count and on what cylinder, that's not there. It's OBD-1.5.   Nothing is ever easy. Now it makes sense why this guy wanted to disappear this thing for cheap. I'm guessing the shop told him the injector is toast, the part is unobtainable and they're not going to sort sending the thing to a rando offering rebuild service on craigslist, and the kid likely can't be without a working car for 3 weeks even if they'd facilitate that.   Experience with these early SCPI's? Stories? Things to check? Sympathy? (..Nah...)   This can sit until I sort it. But I haven't had a problem with a vehicle I couldn't easily solve in a long time.    
    • I have four that read by the dash 8 to 10% better than miles/pump calculations and I have one that is spot on. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...