Jump to content

Recommended Posts

Posted

attachicon.gifIMG_1287.PNG

 

 

Sent from my iPhone using Tapatalk

 

 

Oh man that sport bar looks sooo much better on an HD than a 1500.

Posted

Thanks !! And it looks better with the lights on it I've seen sports bars without the spot lights

 

Also I spent the time putting red LEDS in the word Sierra so it lights up at night

Posted

Traded off my 2014 High Country this week for a 2016 2500 Duramax. I pull a trailer nearly daily for my business and the poor 5.3 was going to die an early death if I kept it much longer. I loved the High Country, but being a work truck I decided to go with a step down to an LTZ this time. Pretty much all the same stuff minus the collision alert and sunroof, neither of which I really cared about anyway. My dealer is top notch and before I ever even picked the truck up I had them put 5% tint, leveling kit, steps, B&W turnover ball, and 305/55R20 Toyo R/Ts on it. Definitely a huge difference in towing my mowing trailer and I can't wait to hook up my camper and car hauler to it.

 

New truck...

 

Hey, I've been to that dealership before!!! Didn't buy anything but they were very helpful and friendly. :jester:

Posted

Here is my 15 2500 HD Denali 6.6L. I traded in my 1500 loaded Sierra for it. It doesn't even compare lol. I love this truck.

post-133462-0-31372500-1476923275_thumb.jpg

post-133462-0-31372500-1476923275_thumb.jpg

post-133462-0-31372500-1476923275_thumb.jpg

post-133462-0-31372500-1476923275_thumb.jpg

  • Like 1
Posted

2016 3500 duramax, 295 70 r18 mastercraft cxt, n-fab steps, husky x-act liners,du-ha under seat storage, pacer cab lights, 2 1/4" ready lift leveling kit.

Very nicely done! :thumbs:

  • Like 1
Posted

2016 3500 duramax, 295 70 r18 mastercraft cxt, n-fab steps, husky x-act liners,du-ha under seat storage, pacer cab lights, 2 1/4" ready lift leveling kit.

How do you like those Mastercrafts? They're on my short list for my next set of tires. Any input/opinions would be appreciated!

Posted

How do you like those Mastercrafts? They're on my short list for my next set of tires. Any input/opinions would be appreciated!

I only put about 1000 miles on the new cxt so far. They ride good and not loud for what you're getting. I used to run Mastercraft ct and really liked them.I would get 65000 miles on the ct. Mastercraft replaced the ct with the cxt. They are nice looking tires and I've never had any problems with Mastercraft tires.
Posted

I only put about 1000 miles on the new cxt so far. They ride good and not loud for what you're getting. I used to run Mastercraft ct and really liked them.I would get 65000 miles on the ct. Mastercraft replaced the ct with the cxt. They are nice looking tires and I've never had any problems with Mastercraft tires.

Good deal. I've always heard good things about Mastercrafts too...and they're made by Cooper...who also has a good reputation. Thanks for the reply!

Posted

Still in its early stage. It usually takes me a few years to get my trucks to where I want them. Last truck was 13 years old with 300,000 miles. It was an 03 Excursion. Every year I take a big swing at it; lift, tires/rims, bumpers, stereo, lights and constant little things. This is a clean slate, I am always excited to drive my truck, I park way far out to avoid dents but to also have a chance to take a long look at my truck as I walk to it. I think this body style, be it Chevy or GMC, has the best lines of any truck and when done right with lift and tires/rims looks beautiful.

post-157863-0-94305400-1477102541_thumb.jpg

post-157863-0-94305400-1477102541_thumb.jpg

post-157863-0-94305400-1477102541_thumb.jpg

post-157863-0-94305400-1477102541_thumb.jpg

Posted

56a308f52e77ff481f0799152fe1128b.jpg9cb7c4e3de837cfdd3427e7451ad89a2.png

 

 

Sent from my iPhone using Tapatalk

Well done! Truck is perfect! [emoji122] what size lift?

 

Sent from my STH100-1 using Tapatalk

Posted (edited)

Well done! Truck is perfect! [emoji122] what size lift?

 

Sent from my STH100-1 using Tapatalk

Thanks it's a 7.5" lift, 20x10 -12 Fuel Mavericks, and 37x13.5 Toyo Open Country MT

 

 

Sent from my iPhone using Tapatalk

Edited by KMGMC
  • Like 1
Posted (edited)

Hi folks,

 

This is my first post after hanging around the forum for a few weeks. Here's my 2016 LTZ 2500HD. So far I've added Amp running boards, BDS 6.5 lift with Fox upgrade and Toyo 35x12.5 RT's on stock rims. The lift kit is turned down to accommodate the 35's instead of 37's and to give better CV angles. I've also covered the gold bow-ties with 3M carbon fiber vinyl to match the tungsten metallic paint better. Next upgrade will be adding a 10" Sundown sub and RF amp to help boost the factory Bose system.

post-162301-0-55104000-1477167911_thumb.jpg

post-162301-0-48955800-1477168606_thumb.jpg

post-162301-0-55104000-1477167911_thumb.jpg

post-162301-0-48955800-1477168606_thumb.jpg

post-162301-0-55104000-1477167911_thumb.jpg

post-162301-0-48955800-1477168606_thumb.jpg

post-162301-0-55104000-1477167911_thumb.jpg

post-162301-0-48955800-1477168606_thumb.jpg

Edited by Dufrsp31
  • Like 4
Posted

 

Hey, I've been to that dealership before!!! Didn't buy anything but they were very helpful and friendly. :jester:

 

My neighbor, golf partner, and good friend is the GM there and I'm on my third truck from him. They have been very good to me, I can't thank them enough.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • It was never mandated.  Ever.    Automakers were incentivized to install it by getting CAFE credits to help with their vehicle fleet fuel economy scores.  They were being handed money/CAFE credits to install it.  Which is NOT a mandate.       The current admin removed the incentives that were behind them installing it.       
    • Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
    • I went another direction after losing a trailer tire, thanks to not being able to access air at ANY of the 5 gas stations and garages I stopped at prior, with a Toyota Tacoma onboard, 50 miles from the Canadian border. They were either out of order, access was blocked, or the hose a few feet too short and I couldn't get any closer without risking damage to someone's property.   https://postimg.cc/gallery/X5QJ55w
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...