Jump to content

Wireless charging broken?

FogDucker

By FogDucker
in Troubleshooting & Recalls

 Share

Recommended Posts

FogDucker Enthusiast

FogDucker

Posted
Posted

Hi all,

 

Is anyone using the wireless charging feature in their 2015i+ models?

 

I find that both my Note 3 and the S6 edge will charge for only 10 minutes at a time and then stop. I have 3 other wireless charging pads and have had zero issues with them. I have also tried both orientations, pushed to the top and bottom. Same results.

 

Is anyone not having troubles?

 

--

Marc

  • 2 weeks later...
FogDucker Enthusiast

FogDucker

Posted
  • Author
Posted

My dealership replaced the console lid which no longer closes properly and didn't resolve the charging from stopping after ~15 minutes.

 

:mad:

 

Is anyone able to wirelessly charge their phones to 100%?

 

 

 

 

FogDucker Enthusiast

FogDucker

Posted
  • Author
Posted

Original console replaced with my original. Got thinking that GM used a single coil in the charger, making the sweet spot smaller. A carefully cut piece of wood confirmed this. If the phone doesn't move at all, it keeps charging. Move it less than a centimetre, it'll disconnect.

 

The better charging pads out there (for desktop use) have 3 coils.

 

Great idea by GM, poor execution.

 

 

235ad04f562513426db1b34212aaecc6.jpg

  • 11 months later...
RonBogner New Member

RonBogner

Posted
Posted (edited)

I have a similar problem in that the charge pad won't charge through my case. The three coil types do charge through the phone case. Purchased the 3 coil guts here..

https://www.aliexpress.com/item/3-Coils-Qi-Wireless-Charger-Micro-USB-Portard-Coil-DIY-Wireless-Charging-Accessories-Wholesale-PCBA-Circuit/32580745925.html

but I haven't figured out how to open the lid yet. Does anyone know a web page the describes opening the console lid?

Edited by Tardisious
  • 7 months later...
wingsaa Enthusiast

wingsaa

Posted
Posted

Original console replaced with my original. Got thinking that GM used a single coil in the charger, making the sweet spot smaller. A carefully cut piece of wood confirmed this. If the phone doesn't move at all, it keeps charging. Move it less than a centimetre, it'll disconnect.

 

The better charging pads out there (for desktop use) have 3 coils.

 

Great idea by GM, poor execution.

 

 

235ad04f562513426db1b34212aaecc6.jpg

I've found that if you place the device on top of the rear ledge it charges every time no issues. Now again, if it moves you're still SOL.

  • 1 month later...
ksfarmdude Enthusiast

ksfarmdude

Posted
Posted

the wireless charging feature is a cheap gimmick I have a Motorola Play Droid phone and only way the charging works is if I take off the protective case that has two parts and a frigging hassle to put back on the wireless charging things is useless to me

  • Like 1
  • 2 months later...
Jpcheslock New Member

Jpcheslock

Posted
Posted

I have the new iPhone 8 with built in wireless charging and a 2016 GMC Sierra 1500 with the wireless charging pad. Charging pad is not working have tried with and without the phone case. Any steps or things I can do to get it to work?

razor2307 Enthusiast

razor2307

Posted
Posted

JPC,, having same issue on a Tahoe. There is another conversation on this forum discussing it also. Search Iphone 8. I have contacted GM infotainment reps, and both dealers here. Nothing yet. I know the vehicle pad works as my friends Samsung charges fine even with a case. I set my Iphone 8 on a charging pad at Best Buy and also charges fine. Not sure whats next but very disappointed. I know the 8 just came out but GM and Apple must talk.

cire0309 Enthusiast

cire0309

Posted
Posted

I have the new iPhone 8 with built in wireless charging and a 2016 GMC Sierra 1500 with the wireless charging pad. Charging pad is not working have tried with and without the phone case. Any steps or things I can do to get it to work?

The iPhone 8 requires an Apple certified wireless charger. Just like when the Lightning connectors first came out and licensing was required.

razor2307 Enthusiast

razor2307

Posted
Posted

Iphone 8 does not required an Apple certified wireless charger. They arent out yet. Bought a $17 cheapy at Target and it works just fine

  • 1 month later...
SSpinball Enthusiast

SSpinball

Posted
Posted

GM wireless charging has 2 major issues.

#1 GM pad thickness is almost 2mm thick, this greatly reduces charging capability,

especially if your using a case. I removed the GM pad and replaced with a thin leather like material.

#2 problem physical size limitation, for newer phones and cases, the sweet charging spot is further back on the larger phones and you will need to move the position all the way to the back edge.

If you remove the bezel the rubber pad will lift out and you can trim to fit.

max. phone/case width 3.1 inches with Gm pad removed.  I now can charge my S8Plus with the phone case, installed no problem.

small.jpg

  • 1 month later...
TRN Enthusiast

TRN

Posted
Posted

Just got an X and it won’t work in my 2017 Sierra. Found an article that stated GMC 2017 and earlier were not Qi certified. So won’t work with the latest gen iPhones. Lame

Tahoe02 Enthusiast

Tahoe02

Posted
Posted

TRN, do a search as some are removing the little magnet from the pad and they are working. Others are swapping out the charging module for the 2018 module and they are working.

JacobC1983 Enthusiast

JacobC1983

Posted
Posted

I swapped out the charging module and connector in my 2017 sierra -- now my iphone x charges perfectly.  Kind of an involved process, have to be careful with the connector.  But it works perfectly.

JacobC1983 Enthusiast

JacobC1983

Posted
Posted
On 1/2/2018 at 10:53 AM, TRN said:

Just got an X and it won’t work in my 2017 Sierra. Found an article that stated GMC 2017 and earlier were not Qi certified. So won’t work with the latest gen iPhones. Lame

I swapped the charging module out in my 2017 Sierra -- I also had to swap out the connector... it is kind of difficult, you have to be careful. 

 

Thread here.... read up and order the parts.  My iphone x charges perfectly now.

 

 

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • diyer2
      The Peckish Synapse

      By diyer2 · Posted

      She's laughing all the way to the bank.
    • newdude
      SLE 2.7L L4 shudders @ 2000-3000RPM

      By newdude · Posted

      There's a new PI on 2023-2026 L3B shudder.  Possible faulty front oxygen sensor.   Dealer can pull up PIP6060A and give it a read.  
    • newdude
      OBD not ready?

      By newdude · Posted

      Also here's the drive cycle for a 2021 Yukon with V8.  DO NOT USE THE CRUISE CONTROL WHEN RUNNING DRIVE CYCLE!!!!!:   Warning: Road test a vehicle under safe conditions and while obeying all traffic laws. Do not attempt any maneuvers that could jeopardize vehicle control. Failure to adhere to these precautions could lead to serious personal injury and vehicle damage. Note: You have completed this procedure when all parameters display Complete. Short stops for traffic will not affect the procedure. Note: Do NOT use cruise control during this procedure. Ignition/Vehicle » Off — For greater than 8 h Verify the scan tool parameter: Cold Start-Up = Yes If not the specified state Ignition/Vehicle » Off — For greater than 8 h & Repeat this step If the specified state Ignition » On / Vehicle » In Service Mode — For 1 min Engine » Idling — For 2 min Drive the vehicle while maintaining the following conditions for 20 min: Part Throttle Vehicle Speed = 24 to 97 km/h (15 to 60 MPH) Safely stop the vehicle Operate the engine/vehicle within the following conditions: Accelerate the vehicle to 64 km/h (40 MPH) Accelerate the vehicle from 64 to 97 km/h (40 to 60 MPH) @ Throttle position between 10% and 13% Release the accelerator pedal and let the vehicle coast down with the brake pedal released — For greater than 20 s Accelerate the vehicle from 64 to 97 km/h (40 to 60 MPH) @ Throttle position between 13% and 16% Release the accelerator pedal and let the vehicle coast down with the brake pedal released — For greater than 20 s Accelerate the vehicle from 64 to 97 km/h (40 to 60 MPH) @ Throttle position between 16% and 19% Release the accelerator pedal and let the vehicle coast down with the brake pedal released — For greater than 20 s Accelerate the vehicle from 64 to 97 km/h (40 to 60 MPH) @ Throttle position between 19% and 22% Release the accelerator pedal and let the vehicle coast down with the brake pedal released — For greater than 20 s Accelerate the vehicle from 64 to 97 km/h (40 to 60 MPH) @ Throttle position between 22% and 25% Release the accelerator pedal and let the vehicle coast down with the brake pedal released — For greater than 20 s Maintain steady state throttle at 89 km/h (55 MPH) — For 10 min Safely stop the vehicle
    • KARNUT
      2027 GMC Sierra: Official Discussion

      By KARNUT · Posted

      About the only GM that compares well with its competitors through the small to midsize vehicles is the Trax. I would like nothing better to just drive GMs. My wife in a Cadillac me in a Chevy minivan and Colorado. Part of my day is comprised of reading and watching comparisons of automobile. I could buy a car today. I’m back to research the next. 
    • newdude
      OBD not ready?

      By newdude · Posted

      Do you have any DFM defeat devices like the Range modules?  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...