Jump to content

Recommended Posts

Posted

Hey guys - how do you remove the upper dash part - closest to the window that goes the width of the truck. Does that make sense? I search for a you tube video or manual reference and couldn't find one. Thanks!

Posted

There is a Youtube video that shows how to do it. The video is about fixing the dash rattle common in these trucks. Basically, you remove the A pillar trim on both sides of the truck and then the top dash trim piece pries out. There are push clips across the front edge of the trim piece that you pop out and then you just lift the trim up and away from the window. The speaker grills are part of the trim panel, and you will need to twist and remove light sensor in the middle. I hope that helps.

  • Thanks 1
  • 7 years later...
Posted
On 2/19/2016 at 12:55 PM, Cabinetman said:

There is a Youtube video that shows how to do it. The video is about fixing the dash rattle common in these trucks. Basically, you remove the A pillar trim on both sides of the truck and then the top dash trim piece pries out. There are push clips across the front edge of the trim piece that you pop out and then you just lift the trim up and away from the window. The speaker grills are part of the trim panel, and you will need to twist and remove light sensor in the middle. I hope that helps.

 

  • Like 1
Posted
11 hours ago, Rick Olberg said:

 

If you really want to dig into it, check out vehcor.
He has a lot of great videos related to Silverados.

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...