Jump to content

New in Jacksonville NC


Recommended Posts

Posted

So I just wanted to do a quick intro, my name is John I am a retired Marine and I just traded in my 14 Durango for a 14 Sierra 1500 SLT All Terrain couldn't pass up the deal they gave me plus my wife works in the service department lol. Only had it a day but loving it so far. One question is it odd to have a regular size bed all the ones I have seen have the short box and mine has the regular box.

post-157926-0-73167600-1462750062_thumb.jpeg

post-157926-0-73167600-1462750062_thumb.jpeg

post-157926-0-73167600-1462750062_thumb.jpeg

post-157926-0-73167600-1462750062_thumb.jpeg

Posted

Welcome from NC

 

As for the bed, starting in '14 you could get either the short bed or regular 6' bed with the Crew Cabs. Before that, if you got a 1/2 ton Crew you had no choice but to get the short bed. Might have had the option of Crew with the 8' long bed. The easy way to tell what size bed on the K2s ('14+) is rather the gas door is on the fender flare or not. Just seems like you rarely see a Crew with the standard bed, even now. When I looked at my '14 at the lot all of the Crews I saw had the short bed and I need the standard bed. I need at least a standard bed because I both want at least that to haul but also because I need a full size toolbox. A low pro would even be too short, so a toolbox with the corners cut out for the fender wells on a short bed wouldn't be big enough. So that shows how much crap I have in the toolbox, then I have the underseat storage under my back seat for more lol. Before these K2s came out with this option I said that if I ever need a Crew I would get a 2500 so I could get the Crew and standard bed. Now you don't have to unless you want or have to get a pre '14 truck.

Posted

Welcome to the site, look forward to seeing you and your truck around the forums. Semper Fi!!

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • It is possible to add your own 12v outlet to your truck.  Check out this video:   I verified via GM Upfitters that pin 31 is the same on the 1500 trucks.  The wire is GM part number 84779405.   You can get the GM 12v outlet from Amazon  https://www.amazon.com/Genuine-Accessory-Receptacle-25774623-13549530/dp/B0F1H9YRGF EWAY 12 Volt Power Adapter for GM   https://www.amazon.com/EWAY-Chevrolet-Silverado-Cigarette-Ignition/dp/B0915RRW6Q/ref=sr_1_1?   I just haven't figured out a good place to put the 12v outlet in my truck.   Some people are getting USB-C to 12V adapters  https://www.amazon.com/WYMECT-Cigarette-Lighter-Socket-Adapter/dp/B0F87WNQKB/ref=sr_1_1_sspa? Not sure if they provide the correct amperage that a device like a tire inflator would need.  
    • Thanks; I looked there a few minutes, and I think I can find something. I really never looked there, as I thought it was stuff like PTO/aftermarket bodies/accessories like snow plows.
    • This is a 1/2 ton thing ONLY.  All HDs 2020-2026 have the two speed transfer case, with Autotrac as an option.     1/2 tons 2019-2026, regular 4x4s come with a single speed case (no 4LO!), and trucks with Z71 ordered, or all Trail Boss trucks come with the 2 speed case.  2 speed case is also an option on WT, and is also standard on High Country.  
    • 2013 5.3 still to this day calls for the PF48 filter.  Which as a 15psi bypass pressure.     There is a TSB, 17-NA-157 that talks about the PF-63 and PF-64 filters which have a higher bypass rating of 22psi.    TSB HERE - temp.xml   "Beginning in 2012, the oil pumps began to regulate main gallery feedback instead of pump out pressure. This means that the oil pump now does not begin to regulate until pressure is built up to the main gallery. This change reduces the amount of time it takes to provide oil to the engine bearing and lifters during extreme cold start conditions.  Main gallery feedback oil pump control systems are present on the following engine families which use Spin-on oil filters: Small Gas Engine (SGE), Large Gas Engine (LGE), High Feature (HFV6) Gen2 and Small Block Gen5 gasoline engines. These engines with the main gallery feedback oil pump control systems are factory built with an ACDelco® oil filters"   It also calls out what engines use those filters.  The gen 4 small blocks were not on that list (LMG, LC9, L9H, L92, L94, L20, L96).  Gen 5 small blocks use the higher pressure filter.          That all said...   Your 7045 Napa filter is the PF63 equivalent, with 22psi bypass.  You are already using the higher bypass pressure filter.  You CAN keep using it, you don't technically have to use it though.  
    • Do you know WHY the filter relief setting was increased to 22 psig?    When the new system goes into the second stage the pump volume ramps up considerably. It was found that the 15 psi filter bypass setting put the filter in bypass on a warm engine when the second stage was activated. Raising the filter bypass setting forced the filter to do what it designed to do. Filter. Preventing debris from circulating during high load, high rpm operation.    So next question is how did GM find this out? VLOM/lifter failures and a deep dive by Melling Corp.    Last question. Is it required? Look at it like this; a motor may be equipped with a rev limiter. But it only works if the set point in reached. That 22 psig setting only matters if the pressure differential across the filter media exceeds 15 psig during normal warm operation. Second stage kicks in around 3000-3500 rpm.    I can't answer your question because I don't know you and how you use the truck. But I think there is enough information here to let you decide for yourself. 😉
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...