2016 SLT lights in 14/15 SLT/All Terrain almost done

[KyleGT]

On the list. Come on 4 more people! ?

[Austin01WS6]

Put me down for a harness. Just sent you a pm.

[Wiseracing2]

I PM'd you for a harness! I want on the list!

[skully85]

I have a 2017 SLT and my turn signal is not LED or in the DRL like the Denali.

 

Is this something I would need?

Edited February 5, 2017 by skully85

[BringTheRain403]

You would need something different. you may just be able to do a straight swap. This harness good from the old style connector to the new style connector.

 

Sent from my Nexus 6P using Tapatalk

Edited February 6, 2017 by BringTheRain403

[KyleGT]

Skully86, you probably have HID lamps instead of LED. Do you have the little GMC logo next to the the projector lens? If not, you have HID. You would need to swap to LED headlamps to get turn signals in the led bars.

[kj3475]

Got my set this weekend... Very nicely done and love that the led "C" functions as it should. Thanks very much z. Now anyone interested in a very lightly used gen5 harness? ?

[BringTheRain403]

Pics?

 

Sent from my Nexus 6P using Tapatalk

[zmnypit]

On the list. Come on 4 more people! ?

Got you down. Ordering the parts today. Thanks!!!

 

Put me down for a harness. Just sent you a pm.

Done

 

I PM'd you for a harness! I want on the list!

Done

 

I have a 2017 SLT and my turn signal is not LED or in the DRL like the Denali.

 

Is this something I would need?

Replied to your PM. If you have a 17 SLT you have LED headlights

 

Got my set this weekend... Very nicely done and love that the led "C" functions as it should. Thanks very much z. Now anyone interested in a very lightly used gen5 harness? ?

Awesome! Thanks a lot.

 

Anyone plugged them up yet?

[BringTheRain403]

I'm going to this afternoon.

 

Sent from my Nexus 6P using Tapatalk

[zmnypit]

I'm going to this afternoon.

 

Sent from my Nexus 6P using Tapatalk

Keep me posted!

[BringTheRain403]

Will do

 

Sent from my Nexus 6P using Tapatalk

[BringTheRain403]

Ok so I just finished my light install thanks to Vann. Here's a video of the lights...

 

 

 

Here's a few pics...

 

 

 

 

 

 

Also, the resisters get hot so I had to think about where to mount them. I wanted to be able to get the harness out without removing my entire front end again if I needed to for any reason. I ended up pop riveting them to the bottom of the metal plate for the air box and the top of the empty metal plate on the driver's side. This way nothing gets melted. Here's a few pics...

 

Passenger side

 

 

Driver's side...

 

 

If you go this route use stainless pop rivets. Aluminum ones will break over time.

 

 

Sent from my Nexus 6P using Tapatalk

[zmnypit]

Ok so I just finished my light install thanks to Vann. Here's a video of the lights...

 

Thanks!!! Nice work and good idea on the resistors..

[BringTheRain403]

Thx! Anyone installing these with the resisters should know that the resisters get pretty hot. Hot enough to burn you and melt plastic so make sure you attach it somewhere on metal and away from anything that could melt...

 

Sent from my Nexus 6P using Tapatalk