Jump to content

Recommended Posts

Posted
On 9/21/2018 at 2:09 PM, Crafty34 said:

Just got this from a buddy at my local dealer. Looks like Chevy is aware and they are working on a fix. 755e37f30625975dbc3861b38619a283.jpg


Sent from my iPhone using Tapatalk

wow this is great news, thank you for sharing!

Posted

All,

 

I put a bunch of lithium in the steering boot yesterday and lo and behold the noise is gone (drove twice today with no noise at all without having to do the lock-to-lock trick). 

 

However - I have to mention I did a few other things as well. I took the plastic deflector shield off (right below the engine) and tightened up some screws where the shield connects to a pair of brackets (the metal brackets made a rattle/resonating noise when banging up against it). I also checked the torque on just about every screw/nut &bolt on the entire steering assembly...everything was tight and to spec. One thing that seemed loose was the steering shaft - it felt like there was some play when moving it around. If the noise comes back I'm taking it into the dealer to have the boot replaced and the shaft looked at.

 

So my conclusion is either 1.) the lithium helped or 2.) tightening the "plastic shield" and "attachment bars" did the trick.

 

If the noise comes back I'll keep everyone updated. If anyone else has an update please share!

Posted
All,
 
I put a bunch of lithium in the steering boot yesterday and lo and behold the noise is gone (drove twice today with no noise at all without having to do the lock-to-lock trick). 
 
However - I have to mention I did a few other things as well. I took the plastic deflector shield off (right below the engine) and tightened up some screws where the shield connects to a pair of brackets (the metal brackets made a rattle/resonating noise when banging up against it). I also checked the torque on just about every screw/nut &bolt on the entire steering assembly...everything was tight and to spec. One thing that seemed loose was the steering shaft - it felt like there was some play when moving it around. If the noise comes back I'm taking it into the dealer to have the boot replaced and the shaft looked at.
 
So my conclusion is either 1.) the lithium helped or 2.) tightening the "plastic shield" and "attachment bars" did the trick.
 
If the noise comes back I'll keep everyone updated. If anyone else has an update please share!
Can you snap a few pics of the locations?

Sent from my SM-G950U using Tapatalk

Posted
30 minutes ago, kport08 said:

All,

 

I put a bunch of lithium in the steering boot yesterday and lo and behold the noise is gone (drove twice today with no noise at all without having to do the lock-to-lock trick). 

 

However - I have to mention I did a few other things as well. I took the plastic deflector shield off (right below the engine) and tightened up some screws where the shield connects to a pair of brackets (the metal brackets made a rattle/resonating noise when banging up against it). I also checked the torque on just about every screw/nut &bolt on the entire steering assembly...everything was tight and to spec. One thing that seemed loose was the steering shaft - it felt like there was some play when moving it around. If the noise comes back I'm taking it into the dealer to have the boot replaced and the shaft looked at.

 

So my conclusion is either 1.) the lithium helped or 2.) tightening the "plastic shield" and "attachment bars" did the trick.

 

If the noise comes back I'll keep everyone updated. If anyone else has an update please share!

I can back up these findings about putting lithium grease into and around the boot.

 

I haven't checked the plastic deflector 

Posted
4 hours ago, dalek77 said:

Can you snap a few pics of the locations?

Sent from my SM-G950U using Tapatalk
 

First two pics are of the steering boot/shaft intersection point. Put a generous amount of white lithium spray grease inside and around the boot. Jonty711 gets the credit for this! Thank you!

697CC466-BEB6-4678-B857-3A7E99AFA5AF.jpeg

11433ED8-F49E-4A12-A848-AA1B8D9A0915.jpeg

Posted
11 minutes ago, kport08 said:

First two pics are of the steering boot/shaft intersection point. Put a generous amount of white lithium spray grease inside and around the boot. Jonty711 gets the credit for this! Thank you!

697CC466-BEB6-4678-B857-3A7E99AFA5AF.jpeg

11433ED8-F49E-4A12-A848-AA1B8D9A0915.jpeg

I also went inside and put lithium grease around the steering shaft from the inside.

  • Like 1
Posted
First two pics are of the steering boot/shaft intersection point. Put a generous amount of white lithium spray grease inside and around the boot. Jonty711 gets the credit for this! Thank you!
697CC466-BEB6-4678-B857-3A7E99AFA5AF.thumb.jpeg.ee9526343c4f1d46088c5636419214a9.jpeg
11433ED8-F49E-4A12-A848-AA1B8D9A0915.thumb.jpeg.a8ca8bbc4cece96ee380d169b65503e0.jpeg
Thank you both. I will report back my findings as well. Ticking was loud as hell on last road trip I took. Tick tick tick all the way down the highway on cruise.

Sent from my SM-G950U using Tapatalk

Posted
6 hours ago, dalek77 said:

Thank you both. I will report back my findings as well. Ticking was loud as hell on last road trip I took. Tick tick tick all the way down the highway on cruise.

Sent from my SM-G950U using Tapatalk
 

Be sure and get the grease nozzle right up between the seal and the shaft on the engine side.

 

Dont just spray it around the end of the seal. It needs to get up between the two

Posted

Good job guys, I was going to throw some zip ties around the nose of that tonight to see if it made a difference but looks like I will be grease packing. So the noise is normal but the fact that it gets into the cab is not. 

 

Makes sense now that I messed around with it a bit, there is a  little up and down side to side play in the end and the thing isn't very stiff. The bouncy nature of the ticking while hitting bumps seems inline with the way that boot moves up and down. 

 

Also makes sense that heat makes it worse and cold makes it better. Stiffer rubber moving less in the winter. 

Posted
3 hours ago, 20165.3Eco said:

Good job guys, I was going to throw some zip ties around the nose of that tonight to see if it made a difference but looks like I will be grease packing. So the noise is normal but the fact that it gets into the cab is not. 

 

Makes sense now that I messed around with it a bit, there is a  little up and down side to side play in the end and the thing isn't very stiff. The bouncy nature of the ticking while hitting bumps seems inline with the way that boot moves up and down. 

 

Also makes sense that heat makes it worse and cold makes it better. Stiffer rubber moving less in the winter. 

I wouldn't go overboard on the tension on the zip ties. The last thing you would want it to prematurely wear out the seal.

 

Just a suggestion.

Posted

Right, it was just going to be for testing purposes. I am going to grease it up tonight and see how it sounds. Since the temps here in Indiana have dropped it's been much harder to make it tick lately. Or it is because I was messing around with the boot when I had my inner fender out. 

Posted

It seems like everything on these trucks needs greased or torqued. I found myself piling the hinges on the center console/seat the other day because of a constant squeaking noise. 

Posted
8 hours ago, Sierra Dan said:

How does greasing this help with the ticking?

What is it about the shaft that ticks?

 

 

Not a clue. I think it just let's DI noise through.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,760
    Total Members
    8,960
    Most Online
    MASONV88888888
    Newest Member
    MASONV88888888
    Joined
  • Who's Online   1 Member, 0 Anonymous, 1,464 Guests (See full list)


  • Latest Articles

  • Posts

    • My 2025 Silverado 1500 had to receive a brand-new engine (long block) under warranty last month at only around 16,500 miles. Before the replacement, the truck repeatedly displayed "Engine Oil Level Low" warnings, even though the Oil Life Monitor still showed around 50% remaining after about 6,000 miles since my last oil change. After seeing the warning several times, I checked the dipstick with the engine cold, and the oil level was completely normal. The next day, the message escalated to "Add Engine Oil." At first, I assumed it was just a faulty oil level sensor, so I brought the truck to the dealership. After inspecting the engine, they found internal cylinder wall scoring and ultimately replaced the entire long block under warranty. Before this happened, I was planning to install a 4-inch lift and suspension upgrade on my truck. After needing a new engine at just 16,500 miles, I honestly don't see the point anymore. I also contacted GM to ask whether my vehicle qualified for a buyback, but I was informed that it does not at this time. Anyway, this experience has left me with serious concerns about the long-term reliability of this engine. I sincerely hope NHTSA expands the current investigation or recall to include 2025 model and performs a thorough inspection of affected vehicles. My biggest concern is that these engines may fail shortly after the powertrain warranty expires. If GM truly stands behind this engine, then at the very least, please consider extending the powertrain warranty to 10 years for affected owners. That would go a long way toward restoring customer confidence.
    • Without exception but then I'm the odd duck, right? I know what goes into that test, how it is calculated and thus how to beat it. But EPA values are often not beaten by the general public and the government has in past years adjusted the means and methods to come to those values to more closely approximate "Joe Average".    The only real trick to beating that EPA average is don't drive like "Joe Average".    It's the same method you used to profit from "Economic Migration" and in doing so beat the 'stats'. But you, like me, are not "Joe Average".     The thing you don't seem to grasp is this "Purchasing Power Index" isn't forward looking. It doesn't predict what it going to be but looks backward and states what it was. They are not telling us what the THINK, they are telling us what they MEASURED. Example:    Wife says "I'm going to lose 40 pounds by Christmas". May she does, maybe she doesn't but the doctors office who weighed her when she made that statement and again at Christmas only REPORTS what the RESULT was. You and I can banter about what was possible and what aunt Tilly did till the cows come home but the result is the result. Arguing otherwise is.....irrational. That's all I'm saying. This isn't about:      What you are calling a 'Statistic' is a RESULT not a CALCUATION and as a result the RULE. Like gravity as a rule, it can not be broken. 
    • Just wanted to say thank you for posting this. Years later, your thread is still helping Silverado owners.   I bought my 2025 Silverado 1500 in January 2025, and I've had what feels like the exact same rattle since day one. After reading your findings, I believe my truck has the same issue with the cable carrier contacting the rear sliding window. To be honest, I had pretty much given up on pursuing the issue. It wasn't until I recently drove another brand's pickup that I realized just how quiet their cabin was—and how noisy mine has been all along. On my truck, the rattle happens on almost any paved road, gets even worse on rougher pavement, and I can even hear it during braking and acceleration.   I actually referenced your thread when submitting my case to GM, hoping they'll recognize this as a recurring issue instead of treating it as an isolated incident. The reason I reached out to GM first is because my dealership told me they would need to keep the truck for at least two days just to diagnose the problem. I was concerned that even after two days, they still might not be able to identify the source of the rattle before giving the truck back to me. I had also asked a few dealerships about this issue during previous service visits, but none of them seemed to know what was causing it or had a solution. That's why I decided to contact GM directly first, hoping they might already have an official repair procedure or guidance for this issue.   I also hope GM eventually comes up with an official fix for this problem. I have a feeling there are many Silverado owners experiencing the same rattle, but most either choose to live with it or simply don't know what the cause is.   Really appreciate you taking the time to document your diagnosis. Your post is still making a difference years later.
    • I have 2 choices. 
    • Do you have access to BP fuels? Some stations have Silver 91 E-0 priced the same as their 93 E-10.  There is a local Marathon with 90 alky free for $6 a gallon but I go down the road to BP for $5-ish. They also have a 100 E-0 but that stuff is $10 a pop. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...