Jump to content

Bose Subwoofer replacement!

andreej

By andreej
in Modifications & Accessories

 Share

Recommended Posts

2018GMC Senior Enthusiast

2018GMC

Posted
Posted

Stealthbox was a HUGE upgrade from stock. Shakes the seats, console, rear view, etc. I’m sure the $1200 dual 10” rear stealthbox would hit harder. 

 

I am am not happy with the small air leak my $600 retail stealthbox had from the factory. Been kicked around with support. Yes I could just seal it myself but a $600 premium JL product should not have an air leak which sounds like a rattle. 

 

If anyone orders this test before installing. 

  • Replies 133
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

andreej
andreej

I recently finished up my Bose Subwoofer replacement in my 2016 LTZ. I felt the Bose Sub was very underwhelming. I considered the Kicker option made specifically for the Silverado, but didn't want t

andreej
andreej

I didn't include any pictures of it all back together because it looks just like it did before I took it apart! The center console fits over the top of my box just like it did over the bose. There's

l1nk3d
l1nk3d

Fire...  Sent from my SM-G935P using Tapatalk

Posted Images

2018GMC Senior Enthusiast

2018GMC

Posted
Posted (edited)

FYI Stealthbox is fiberglass

Factory bose is plastic

running JL with recommended xd300/1v2 amp

Stock bose 6” sub vs 10” JL Stealthbox for under center console 

B212DE48-D9E4-4B7B-9492-7CCB6BFA8999.jpeg

Edited by 2009GMC
truckmann Enthusiast

truckmann

Posted
Posted

The Stealth box looks awesome but way too expensive and probably overkill for what I want.

Sent from my Pixel 2 XL using Tapatalk

2018GMC Senior Enthusiast

2018GMC

Posted
Posted (edited)
11 minutes ago, truckmann said:

The Stealth box looks awesome but way too expensive and probably overkill for what I want.

Sent from my Pixel 2 XL using Tapatalk
 

I purchased through rakuten for 550 - 15% sitewide coupon. Which greatly helped the wallet pain. I checked to make sure the actual seller was authorized for warranty. Even though their support (so far) leaves a lot to be desired 

Edited by 2009GMC
  • Like 1
tmkilburn Enthusiast

tmkilburn

Posted
Posted

Can anyone give me the rundown on center console removal to replace the factory bose sub? Bout to install an L7 8 and would like to avoid breaking any clips which I am prone to do due in frustration on occasion. 

 

truckmann Enthusiast

truckmann

Posted
Posted
6 minutes ago, tmkilburn said:

Can anyone give me the rundown on center console removal to replace the factory bose sub? Bout to install an L7 8 and would like to avoid breaking any clips which I am prone to do due in frustration on occasion. 

 

This video is on a jump seat to console swap, but it looks to be the most helpful one I've seen. 

 

 

  • Like 1
tmkilburn Enthusiast

tmkilburn

Posted
Posted (edited)

Alright got my console removed. Wasn't that bad. Anyone else wanting to pull the console to add a sub this is what you need to do. 

1. Lift the console lid and pry up the the console trim that holds the cup holders and outlets. I used a screwdriver and pried it at the locations below as seen on youtube videos.
2014-GMC-Sierra-Denali-1500-Crew-Cab-center-console-02.jpg.8d312dbbee0a00e17e93811d0a437941.jpg

 

2. With the trim removed there will be 2 10mm bolts exposed. Remove them.

3. Disconnect all the connectors on the trim piece as well as the larger harness and the brown USB harness behind the trim piece. 

4. Remove the map pocket trim on either side of the console. They just pull straight out. You may have to move the seats around to get them completely out. With the map holders removed 1 bolt on either side will be exposed. 15mm I think.

5. Move your seats all the way forward and at the back on either side of the console near the carpet are 2 plastic cover. Pry them open from the back with a thin screwdriver. Behind the covers are 2 more 15mm bolts. Remove them.

 

At this point you should be able to slide the console back. I had to lift mine up a bit but it should be completely free

 

Edited by tmkilburn
Correction
  • Like 1
  • Thanks 2
  • 4 weeks later...
YukonXL04 Enthusiast

YukonXL04

Posted
Posted
16 hours ago, TripleBGM said:

I may need to do this.  I'm not impressed with the bose system.

Me either... I'm wondering if my bose sub is even working. With the volume up, you can feel the doors vibrating, but feel absolutely nothing when you touch the console. I would think if the sub was working your would atleast feel a little bit.

  • Like 1
ripinlip Enthusiast

ripinlip

Posted
Posted
Me either... I'm wondering if my bose sub is even working. With the volume up, you can feel the doors vibrating, but feel absolutely nothing when you touch the console. I would think if the sub was working your would atleast feel a little bit.


Same exact situation here on my ‘18 HC. Trying to decide between an 8” or a 10”. Something tells me that a 10” that close to my ears is going to be too much bass


Sent from my iPhone using Tapatalk
2018GMC Senior Enthusiast

2018GMC

Posted
Posted

I added a bass level control knob so I can adjust per music ? 

huntr1117 Enthusiast

huntr1117

Posted
Posted

Ended up buying the center console box off ebay with the kicker comp 8". I haven't sold my 10" single box that goes under the rear seat yet, but ebay had a 15% off coupon so I decided to buy it. Here's a few pics of the install. I haven't wired it to my amp yet cause I have to remove my backseat to get to it. It was a little hot outside today with a heat index of 108 so I'll finish tomorrow. It took me about an hour and a half to install cause I was taking a few water breaks.
Here's a few pics of the console removed, the stock Bose sub, the new box with 8" sub next to the stock Bose, the 10" sub I removed compared to the others, and the new 8" installed before I put the console back in.42f7e3b4ad8232a97da7487c130bbc63.jpg4e492859dc2316718c9b7a9f9ccd8898.jpg5364e65ad4729206f569de094d742408.jpg3e2cbcd96c831a1522b3241cd33f116e.jpg

Sent from my SM-G950U using Tapatalk

  • Like 3
ripinlip Enthusiast

ripinlip

Posted
Posted
Ended up buying the center console box off ebay with the kicker comp 8". I haven't sold my 10" single box that goes under the rear seat yet, but ebay had a 15% off coupon so I decided to buy it. Here's a few pics of the install. I haven't wired it to my amp yet cause I have to remove my backseat to get to it. It was a little hot outside today with a heat index of 108 so I'll finish tomorrow. It took me about an hour and a half to install cause I was taking a few water breaks.
Here's a few pics of the console removed, the stock Bose sub, the new box with 8" sub next to the stock Bose, the 10" sub I removed compared to the others, and the new 8" installed before I put the console back in.42f7e3b4ad8232a97da7487c130bbc63.jpg4e492859dc2316718c9b7a9f9ccd8898.jpg5364e65ad4729206f569de094d742408.jpg3e2cbcd96c831a1522b3241cd33f116e.jpg

Sent from my SM-G950U using Tapatalk



Nice. That is helpful to see. Thanks. Does the wiring look like it will be largely a direct replacement (once you get your amp in there)?

On the back wall are you going to run new power or share with the existing amp?


Sent from my iPhone using Tapatalk
huntr1117 Enthusiast

huntr1117

Posted
Posted

Nice. That is helpful to see. Thanks. Does the wiring look like it will be largely a direct replacement (once you get your amp in there)?

On the back wall are you going to run new power or share with the existing amp?


Sent from my iPhone using Tapatalk
I'm just reusing my existing amp. I'm removing my 10" under the rear seat so I can put my rear storage back in. All I have to do is connect the speaker wire from the sub to the amp, but I have to remove the rear seats to get to it. While they're out I'll also be able to adjust the amp for the new sub.

Sent from my SM-G950U using Tapatalk

truckmann Enthusiast

truckmann

Posted
Posted

Nice. I ordered one with the L7 in it using the same discount. No idea when I'll get it installed. I still need to mount my amp and run wiring. 

IMG_20180820_193955.jpg

  • Like 1
  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,902
    Total Members
    8,960
    Most Online
    whenindoubtuseahammer
    Newest Member
    whenindoubtuseahammer
    Joined

  • Who's Online   3 Members, 0 Anonymous, 281 Guests (See full list)

  • Latest Articles

  • Posts

    • Coastie05
      Casey from the Texas Hill Country

      By Coastie05 · Posted

      Enjoy the new truck, it’s a beauty. I’m glad you’re keeping the OBS, I love those old trucks. 
    • chris21
      Towing In Loose Gravel

      By chris21 · Posted

      With large equipment or deep mud it is more of a use the higher gear to avoid spinning tires, getting stuck because of spinning tires and doing damage to your machine. The idea is if you run out of torque before you spin tires you can still downshift for more torque. If you are just spinning your tires in the lowest available gear you are stuck and things break.   Automatic transmissions, traction control and electronic transfer cases change the calculation a little as you the driver have less control over each piece. 
    • davester
      My First Project and GMC has me stumped

      By davester · Posted

      are there any codes? with lots of rust, perhaps disconnect/clean both sides of the connection/examine cable ends (the wires) for corrosion going into the sheath & replace if necessary/reconnect ALL the power AND ground cables between the battery, engine, frame, cab, fuse box and starter charm.li (website) has a no-start diagnostic procedure you can work through to get it working.
    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      Its no wonder you've gravitated to the oil types and brands you have in later years after trying certain brands and one being a specialty oil or at least very hard to come by up here and the other would have been a commonly found oil of the era and the vastly different outcomes as a result to using the vehicles in question the same distance for an OCI . It shows what marketing hype can do without actually having the product to back up the claims and that is no different now with the insane claims that are written on the side of a bottle of oil from some of the off the shelf oils.    What has surprised me and I was already finding this out before I bought my truck with the GDI engine, that this newer fancy technology that seemingly would suggest better fuel economy/emissions with this high pressure spray of fuel is not in reality kind at all to the engine or at least the oils life. Yet they insist on claiming long OCI with this technology just like they did with the port or similar type fuel injection systems when in reality its a step back in oil life to have a GDI system.    I think the mistake your making Grumpy is that your not sending your samples to Blackstone and getting the feel good glowing report that you can run it another 1000 or more miles and then send another sample where they say run it yet another 1000 miles and on and on it goes until your sending in something that looks a lot like road tar and then they may suggest you change your oil within the next 1000 miles 😆
    • Chuck FB
      OCI, not when but why?

      By Chuck FB · Posted

      I am guessing that engines of that design back then had a better ability to be abused and survive longer than a new design engine with the long timing chain and the overhead cams and phasers etc. But I would never guess that an engine could go that far and not fail spectacularly or at least die a slow death. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...