Jump to content

Recommended Posts

Posted

I own a 2017 GMC Sierra 1500 Denali with 6.2L w/ 8-speed trans. For a few months now I've been experiencing intermittent vibration that was very noticeable in the steering wheel, almost like a rumble strip type of vibration. It only happened on light acceleration and when the transmission was fully warmed up. I brought it to my local GMC dealer to have them look at it. They couldn't find anything wrong with it and gave me the normal BS answer that it was operating normally.

 

I let another 2 weeks pass before I got pissed off again and brought it to another GMC dealer. This time, I had a tech go with me for a ride and he could clearly see and feel the vibration I was talking about. The service manager said he would call GM and hopefully get a fix for this.

 

So after 2 days in the shop, I got my truck back. Apparently the transmission was overfilled from the factory causing excess foaming in the fluid which can cause shuddering. GM instructed the dealer to do a double flush of the tranny and replace the filter. So far so good, I haven't felt anything and shifting feels smoother. I know there was a TSB about this for '15-'16 models, but the dealer told me that there was an update in Feb. 2017 that applies to my truck. I didn't get to see it so I can't tell you what the TSB # is.

 

Anyhow, I thought I would pass this along to anyone else experiencing this issue. I know how frustrating this stuff can be so passing info like this along I hope will help someone else.

  • Like 3
Posted

Apparently the transmission was overfilled from the factory causing excess foaming in the fluid which can cause shuddering. GM instructed the dealer to do a double flush of the tranny and replace the filter. So far so good, I haven't felt anything and shifting feels smoother.

 

That is pretty remarkable that an excess of trans fluid could cause a vibration in the steering wheel.

 

Good luck with the fix! :thumbs:

  • 2 years later...
Posted

I have a 2017 GMC Sierra, 6.2 w/ 8 speed, that also has a bad vibration while going about 50-70 mph. It started at about 25k miles, and it was after I had a tire alignment. The vibration described above is similar to my vibration, and that it feels like a rumble strip while going full speed. Things that I have notice along with this vibration: it usually only happens on very smooth road while at a constant speed, and at those speeds I can see a very rhythmic rpm uptick of about 50-100 rpm every couple of seconds wether it does vibrate or not. I’ve got an appointment for it since I’m still on warranty.

  • 5 months later...
Posted
On 4/6/2017 at 10:26 PM, shadowmn said:

I own a 2017 GMC Sierra 1500 Denali with 6.2L w/ 8-speed trans. For a few months now I've been experiencing intermittent vibration that was very noticeable in the steering wheel, almost like a rumble strip type of vibration. It only happened on light acceleration and when the transmission was fully warmed up. I brought it to my local GMC dealer to have them look at it. They couldn't find anything wrong with it and gave me the normal BS answer that it was operating normally.

 

I let another 2 weeks pass before I got pissed off again and brought it to another GMC dealer. This time, I had a tech go with me for a ride and he could clearly see and feel the vibration I was talking about. The service manager said he would call GM and hopefully get a fix for this.

 

So after 2 days in the shop, I got my truck back. Apparently the transmission was overfilled from the factory causing excess foaming in the fluid which can cause shuddering. GM instructed the dealer to do a double flush of the tranny and replace the filter. So far so good, I haven't felt anything and shifting feels smoother. I know there was a TSB about this for '15-'16 models, but the dealer told me that there was an update in Feb. 2017 that applies to my truck. I didn't get to see it so I can't tell you what the TSB # is.

 

Anyhow, I thought I would pass this along to anyone else experiencing this issue. I know how frustrating this stuff can be so passing info like this along I hope will help someone else.

 

Posted
On 4/6/2017 at 10:26 PM, shadowmn said:

I own a 2017 GMC Sierra 1500 Denali with 6.2L w/ 8-speed trans. For a few months now I've been experiencing intermittent vibration that was very noticeable in the steering wheel, almost like a rumble strip type of vibration. It only happened on light acceleration and when the transmission was fully warmed up. I brought it to my local GMC dealer to have them look at it. They couldn't find anything wrong with it and gave me the normal BS answer that it was operating normally.

 

I let another 2 weeks pass before I got pissed off again and brought it to another GMC dealer. This time, I had a tech go with me for a ride and he could clearly see and feel the vibration I was talking about. The service manager said he would call GM and hopefully get a fix for this.

 

So after 2 days in the shop, I got my truck back. Apparently the transmission was overfilled from the factory causing excess foaming in the fluid which can cause shuddering. GM instructed the dealer to do a double flush of the tranny and replace the filter. So far so good, I haven't felt anything and shifting feels smoother. I know there was a TSB about this for '15-'16 models, but the dealer told me that there was an update in Feb. 2017 that applies to my truck. I didn't get to see it so I can't tell you what the TSB # is.

 

Anyhow, I thought I would pass this along to anyone else experiencing this issue. I know how frustrating this stuff can be so passing info like this along I hope will help someone else.

Did this actually work? I just bought a 2017 Sierra and it is doing the occasional rumble strip feeling...

Posted (edited)

Exact same thing on my 2017.  There's several topics on this, read through the thread below and that should answer most of your questions.  Here is a link to the TSB which was updated in Feb. 2019.

 

 

Edited by reardiff
Posted
On 1/19/2020 at 10:35 AM, Jesse Goetsch said:

I have a 2017 GMC Sierra, 6.2 w/ 8 speed, that also has a bad vibration while going about 50-70 mph. It started at about 25k miles, and it was after I had a tire alignment. The vibration described above is similar to my vibration, and that it feels like a rumble strip while going full speed. Things that I have notice along with this vibration: it usually only happens on very smooth road while at a constant speed, and at those speeds I can see a very rhythmic rpm uptick of about 50-100 rpm every couple of seconds wether it does vibrate or not. I’ve got an appointment for it since I’m still on warranty.

Did you ever find a fix for this?

Posted
8 hours ago, Dwayne Walley said:

Did you ever find a fix for this?

Yeah, they literally just flushed the tranny and replaced it with a different type of tranny oil, never had any issues since.

Posted
1 minute ago, Gooch g said:

Yeah, they literally just flushed the tranny and replaced it with a different type of tranny oil, never had any issues since.

Same person but it wouldn't sign me into my other account btw.

  • 1 month later...
Posted
On 7/21/2020 at 5:12 PM, Gooch g said:

Same person but it wouldn't sign me into my other account btw.

My 2018 GMC Sierra is doing this same thing to me. It feels like I am hitting a rumble strip happens the most around 60 mph and 35 mph. I am no car/truck guy, is getting this fluid flushed and refilled expensive? Is it likely this is what my problem is?

  • 3 weeks later...
Posted

My 2017 Sierra 1500 Denali 4WD started slightly shuttering only intermittently around 42,000 miles. Now at 47,500 it has become unbearable and I have to downshift into 7th gear. Going into dealer next Monday, we will see what they say.

  • 2 weeks later...
Posted
On 9/22/2020 at 1:32 PM, montecarlo104 said:

My 2017 Sierra 1500 Denali 4WD started slightly shuttering only intermittently around 42,000 miles. Now at 47,500 it has become unbearable and I have to downshift into 7th gear. Going into dealer next Monday, we will see what they say.

Sounds like the old TCC shudder - Make sure they're aware of 16-NA-355 - https://static.nhtsa.gov/odi/tsbs/2019/MC-10163890-9999.pdf

 

They'll likely need to flush transmission fluid.  If your TCC is shot, procedure is to flush first and see if it comes back and if so likely replace TCC.

Around 1250RPM the torque converter doesn't completely lock, its pulsated and light acceleration causes a bit of slippage with the old transmission fluid due to moisture in the fluid.  It can also be exacerbated by AFM kicking on and off around the same RPM.  You'll get a different shudder when it switches and M7 typically deactivates AFM.

Posted
2 minutes ago, montecarlo104 said:

since and not one shudder yet

Awesome, yeah I'm nearly 2 years in on mine since the new fluid and its been great!  I started having this issue when it was first documented as PIP5337A (they went half way up the alphabet on revisions).

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,903
    Total Members
    8,960
    Most Online
    RyGuy43
    Newest Member
    RyGuy43
    Joined
  • Who's Online   5 Members, 0 Anonymous, 460 Guests (See full list)

  • Latest Articles

  • Posts

    • This is NOT impact damage nor neglect. There were previous class action lawsuits because of such paint preparation st GM manufacturing plant. Not just the Cherry Red Color. This paint is applied in three processes to obtain the desired color.  The manufacturer will cover for 36 months or 36k miles only. That rust is actually corrosion because of the paint process failure. Corrosion is covered for 100,100 miles or a certain months. However their corrosion doesn't include this type. Go figure. Clearly manufacturer knew from previous paint issues. This started 3 weeks ago out of the blue.  
    • Is it time to put a piece of tape over the CEL? 
    • consider doing electrical testing?  I would guess some power or ground wire/connection has a problem.   alldata.com has wiring diagrams, connector pinouts and diagnostic procedures you can use to find where the problem is.
    • can you tell if the reader is actually trying to get codes, and the pcm is reporting none, or is your reader just silently failing because it's not communicating with the pcm?
    • Any joy with this truck seems to be short-lived.   The CEL for P0172 ("bank 1" too rich) is now "intermittent".   I'm not sure where to check, or re-check, and my energy to keep chasing problems with junk is wearing thin. The P0172 seems to set as I'm coming to a stop, completely off the throttle, when fully warm. At least, that's what it's done the 3? times it's set.   Everything appears normal on the scanner EXCEPT long term fuel trim. There's only one bank on this vehicle because it's an OBD 1.5 with only one upstream O2 sensor. At idle, it's around -16.4% and will dip to -18% occasionally at idle or off-throttle. LTFT approaches 0 when throttle is held at 2500rpm. Short term appears normal, much closer to zero all the time. The LTFT tells me the engine is running rich at idle but compensating at higher load. But, why?   The EVAP purge valve doesn't appear to be leaking/sucking fuel vapor continuously. Is it sticking just as I come to a stop and the engine is choking on fuel vapor and sets the P0172? But that doesn't explain the persistently negative LTFT. Disconnecting the purge valve doesn't seem to make any difference.   I suppose that leaves another dang issue with the fuel injector. A leaking fuel pressure regulator, a new leak in the spider, or a leaking fuel injector/poppet valve I didn't see, or a small crack in one of the spider legs.   The vacuum line leading to the fuel pressure regulator doesn't have raw fuel in it. It doesn't even smell like fuel when it's pulled off, not until you suck air through it, then you can tell it leads to a fuel component. I'd consider that normal? Nothing is signaling this is a FPR issue from the outside, at least.   The oil smells like fuel but it's not building volume. I've noticed most oil in most engines smells like fuel to some degree so it's hard to say if the smell is an issue or not. Or if the engine just still smells like fuel because the crankcase was full of it a few hundred miles ago. But it's been changed twice since that original issue of the leaking fuel line dumping fuel into the intake.   Patience is running very thin. Every win seems to be accompanied by two steps backwards, or another issue that leads to removing at least the top half of the intake manifold. Enough! LOL
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...