Adding front park assist?

caskey_b · September 2, 2017

So I purchased a 2014 Silverado LT and they tried to add the front park assist...

There are sensors in the bumper and there is a harness plugged in with 4 leads to connect to the 4 sensors...

Problem is, the leads don't plug into the sensors (plugs don't match up)

I went online and searched part numbers and have verified that I have the correct harness and the wrong sensors..

My question is, if I buy the correct sensors and install them and plug them into the harness, will front park assist work? Will a flash by a dealer make it work?

From what I know, this LT was never equipped from the factory with front assist... but it does have working rear assist

newdude · September 2, 2017

So I purchased a 2014 Silverado LT and they tried to add the front park assist...

There are sensors in the bumper and there is a harness plugged in with 4 leads to connect to the 4 sensors...

Problem is, the leads don't plug into the sensors (plugs don't match up)

I went online and searched part numbers and have verified that I have the correct harness and the wrong sensors..

My question is, if I buy the correct sensors and install them and plug them into the harness, will front park assist work? Will a flash by a dealer make it work?

From what I know, this LT was never equipped from the factory with front assist... but it does have working rear assist

Negative ghost rider. Clean carfax on that truck? They may have tried to add the assist, but I wouldn't rule out someone tossing a bumper on it due to the original being damaged.

As for the park assist. Trucks with only rear and trucks with front and rear park assist both use the same module. The IPC will be missing the proper displays for the front sensors, there may be some wiring differences, and GM doesn't support any programming to add such features.

caskey_b · September 2, 2017

Negative ghost rider. Clean carfax on that truck? They may have tried to add the assist, but I wouldn't rule out someone tossing a bumper on it due to the original being damaged.

As for the park assist. Trucks with only rear and trucks with front and rear park assist both use the same module. The IPC will be missing the proper displays for the front sensors, there may be some wiring differences, and GM doesn't support any programming to add such features.

Thank you! appreciate the feedback...

salvage title.. bumper was replaced...

That being said, Ill quick looking around for sensors and move on to my next project (filling in the holes on the front bumper)... was thinking of adding flush mount LED bolts in them either amber or white for DRL... still in question....