Jump to content

2015 Silverado OEM flip down overhead screen pre-install.

Viktorrocks15

Recommended Posts

Viktorrocks15 Enthusiast

Viktorrocks15

Posted
Posted

I’ve made a video on how to pre-install the OEM gm flip down overhead screen, I’ll make another video once is finish. Hopefully this help some people out there.

 

 

 

Sent from my iPhone using Tapatalk

Jaychevy81 Enthusiast

Jaychevy81

Posted
Posted

I’ve made a video on how to pre-install the OEM gm flip down overhead screen, I’ll make another video once is finish. Hopefully this help some people out there.
 

 
 
Sent from my iPhone using Tapatalk


I am really interested in doing this not sure if the parts or process is the same for a 2018. It has a sunroof so idk what I would need to even make his work. Just wondering if you have any part numbers thanks. Jay


Sent from my iPhone using Tapatalk
Viktorrocks15 Enthusiast

Viktorrocks15

Posted
  • Author
Posted

I am really interested in doing this not sure if the parts or process is the same for a 2018. It has a sunroof so idk what I would need to even make his work. Just wondering if you have any part numbers thanks. Jay


Sent from my iPhone using Tapatalk


You’re in luck! You truck comes equipped with the brackets already there.. I’ll make a list of the parts you need and who you need to contact to make this work., I must say you’re almost half way there.


Sent from my iPhone using Tapatalk
Jaychevy81 Enthusiast

Jaychevy81

Posted
Posted


You’re in luck! You truck comes equipped with the brackets already there.. I’ll make a list of the parts you need and who you need to contact to make this work., I must say you’re almost half way there.


Sent from my iPhone using Tapatalk

Really? I would have never thought that honestly lol. Your awesome thank you appreciate the help.


Sent from my iPhone using Tapatalk
Viktorrocks15 Enthusiast

Viktorrocks15

Posted
  • Author
Posted

Really? I would have never thought that honestly lol. Your awesome thank you appreciate the help.


Sent from my iPhone using Tapatalk

I’ll send you a video on a flip down screen being installed on a sunroof equipped Denali.


Sent from my iPhone using Tapatalk
WesternMike Enthusiast

WesternMike

Posted
Posted

Yeah if you don’t have a sunroof.. you’ll need to order the right head liner to match holes.. not cheap and one of most expensive parts of this mod.

It will be done to my non sunroof eventually. Just waiting for a head liner to come up for cheap.

WesternMike Enthusiast

WesternMike

Posted
Posted

There is a need if you want it to look factory though boss.

If not you can leave the original rear dome light in like you have plans for. Long as you wire that up to work, because from my understanding your new DVD player uses that original dome light wire now.

I’m for sure curious to see how this looks when complete man.

Job well done so far. Did you get the kit from MVI?

Viktorrocks15 Enthusiast

Viktorrocks15

Posted
  • Author
Posted
There is a need if you want it to look factory though boss.

If not you can leave the original rear dome light in like you have plans for. Long as you wire that up to work, because from my understanding your new DVD player uses that original dome light wire now.

I’m for sure curious to see how this looks when complete man.

Job well done so far. Did you get the kit from MVI?


Lucky for me Phil Gamboa the harness master is within 20 min drive and he will be making my harness to keep my dome light and my screen working. I didn’t go thru MVI, I purchase everything separately.


Sent from my iPhone using Tapatalk
WesternMike Enthusiast

WesternMike

Posted
Posted

Lucky man haha

You should post all parts with GM numbers. As well as the terminal for the dome light for those who want to keep it, or is Phil going to be making these harness’ for people now as well?

Viktorrocks15 Enthusiast

Viktorrocks15

Posted
  • Author
Posted
Lucky man haha

You should post all parts with GM numbers. As well as the terminal for the dome light for those who want to keep it, or is Phil going to be making these harness’ for people now as well?


I will eventually, the terminals that will be Phil’s part to do.. lol since he’s building it. He’s also doing this upgrade so I’m sure after he done with his he might build harness for sale maybe.


Sent from my iPhone using Tapatalk
Jaychevy81 Enthusiast

Jaychevy81

Posted
Posted

I will be a 100% doing this mod once I get the part numbers I will order everything. Hopefully Phil can make me a harness lol.
One thing I am not sure of is the programming is there a easier way then having the truck sit for a week or 2? I can’t be without it. Would a dealer be able to flash the HMI just wondering if there are any other options.


Sent from my iPhone using Tapatalk

Viktorrocks15 Enthusiast

Viktorrocks15

Posted
  • Author
Posted
I will be a 100% doing this mod once I get the part numbers I will order everything. Hopefully Phil can make me a harness lol.
One thing I am not sure of is the programming is there a easier way then having the truck sit for a week or 2? I can’t be without it. Would a dealer be able to flash the HMI just wondering if there are any other options.


Sent from my iPhone using Tapatalk




Sent from my iPhone using Tapatalk
Jaychevy81 Enthusiast

Jaychevy81

Posted
Posted




Sent from my iPhone using Tapatalk

Phil pulls through again lol. Once I have everything ordered that’s what I will do.


Sent from my iPhone using Tapatalk

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,860
    Total Members
    8,960
    Most Online
    HWN808
    Newest Member
    HWN808
    Joined

  • Who's Online   3 Members, 2 Anonymous, 966 Guests (See full list)

  • Latest Articles

  • Posts

    • richard wysong
      Gas Prices

      By richard wysong · Posted

      Diesel $5.42 at the truck stop on the hi-way
    • Chuck FB
      Joke Thread

      By Chuck FB · Posted

    • txab
      Gas Prices

      By txab · Posted

      $3.59  
    • needafix
      2019+ Brake failure, it's complicated

      By needafix · Posted

      I'm not sure if this should be a new topic, let me know if it's out of place. This my first post. Thanks 85077522 - AC Delco GM Genuine Parts Brake Master Cylinders. Anyone else had to replace this brake master cylinder yet. I didn't do any brake work, it looks like new parts and I've had the truck for about 4k miles, 119k total miles.  When it started to throw codes I did the calibrations with a bidirectional scanner and got the codes to clear but they came back so I did the routine; base bleed, automated bleed and final base bleed. All that with Bosch ES16-32N fluid (please look it up). That seemed to fix it but 100ish miles later it failed again so I ran the same process but with a pressure bleeder this time and got the same results, fixed for 100ish miles. The original fluid looked bad and I thought I got most of it out, it could've been the wrong fluid. The codes; P25A2, C05B0-00, C2A1B. I can get them to clear but not for long. The C05B0 indicates a leak in the front circuit (which is bone dry) so I'm thinking of doing the bleed process on that front again today and I don't know if that's taboo to just do the front but at this point it seems like it's worth the try anyway. The new master cylinder/module unit is supposed to get here today. But now I'm pretty much convinced this install is over my head. I've called several shops and some mobile guys that I know but this thing is like radio active material, scary wise. I did get 2 local shops say they should be able to do it, one says he has the SPS2 programing capability. And with the battery disconnected is there supposed to be pedal resistance, mine is to the floor, then if I pump it I can get some resistance. I had a panic stop prior to this issue which may have contributed from what I read. And on the first attempt to bleed and hydraulic test the scanner listed things to look for and one was any gaps between the pad and rotors which I did notice on the RF corner and I removed the outer pad (where the gap was) cleaned it and the hardware and didn't see a gap after that but will re-check it. I read that if pushing the caliper pistons back then you're supposed to open the bleeder so as to not push fluid backwards into the abs module or it will damage it. If that's true then that's also a possibility from the previous owner having the brakes changed before I got it. I'm using an XTool ip500 scanner. Any suggestions, questions and comments welcome. 
    • Donstar
      Navigating senior years.

      By Donstar · Posted

      Next Friday will be my 6 week point from my right knee replacement.  The surgeon says it will be fine if I choose to drive after this checkup.  I know I could drive now but best to do as my surgeon (and my wife) tell me.  Richard compared being 62 to 72.  I remember when I was in my early 60's I was experiencing slow but regular decline in my mobility.  Thanks to good medical support,  i continued to fight the speed and spread of this decline. During my 60's I worked on non-surgical methods and just when I turned 70, my orthopedic surgeon recommended joint replacements.  In a little over a year, I had one shoulder and both knees replaced.  This hasn't been a terribly fun experience, but worth the discomfort as my future mobility health trajectory has reversed.  It is a treat to now be watching my mobility. balance and confidence steadily improve!

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...