Jump to content

Recommended Posts

Posted

I have the same problem and was thinking about taking it in

2019 gmc slt but don't want to leave it there for a week to hear its normal

 

  • 4 weeks later...
Posted

Has anyone gotten a fix, if it's the converter, why dont they replace it,  it's under warranty,  it's not normal, I sighed up for the service help on the social media , but I'm still waiting, a 61k truck ,,its not normal, any TSBs, of late. Converter replacement, ? or just nothing? ,thanks all , Bratbowtie 

  • 1 year later...
  • 2 weeks later...
Posted (edited)

19 degree weather here in South Jersey same noise for the 1st time when starting cold 27000 miles this is the 1st time it has done it since new. 2019 custom TB 5.3

Edited by K455
  • 4 weeks later...
Posted

Noise happens to me as well on my 2019 Silverado Z71 in warranty period. This did not happen when I test drove this truck or any other Chevrolet silverado back in 2019. If I had hear this noise when test driving and still chose to buy... that would be different. So I agree with all stating that this is not normal. My truck is at Chevy dealership now. They are currently telling me that this is normal. But they are also telling me that they don't hear anything. Not sure how since I have heard it every morning for the last six months. (most pronounced when cold - they have kept it two mornings where it was under 20 degrees F). If I get anything from the dealership I will share.

Posted

Normal imo,as these di engines, both the 5.3 and 6.2, are the most noisy racketing engines i have ever owned. These engines all literally sound like a box of rocks at idle imo.

 

That initial grind type noise at crank, if that is what the OP is talking about, has done it every time i have started my truck for the last 7 years now. I gave up wasting my time with dealers and e ngine noise because they literally just say it is normal and move on, very seldom will you find a proactive dealership these days.

  • 2 weeks later...
Posted
On 2/11/2022 at 4:14 PM, BIGDOGx said:

Normal imo,as these di engines, both the 5.3 and 6.2, are the most noisy racketing engines i have ever owned. These engines all literally sound like a box of rocks at idle imo.

 

That initial grind type noise at crank, if that is what the OP is talking about, has done it every time i have started my truck for the last 7 years now. I gave up wasting my time with dealers and e ngine noise because they literally just say it is normal and move on, very seldom will you find a proactive dealership these days.

 That is the exact word GRIND just on real cold  mornings on initial start from dead cold.

  • 1 year later...
Posted

I've dealt with this noise ever since I purchased the new 2017 Silverado.    The first time I brought it in with this same exact complaint I was given a service bulletin saying it was normal.   Weird noise normal?   I guess that's the excuse these days.    A few years later as my Warranty was running out, "it's the starter."    Was hopeful that was it but wasn't.   As the Warranty expired, the noise got worse and worse.   Turns out to be the Transmission!   Oh wow!   Finally.   What a joke.   I'm currently going thru this and have not had the transmission replaced but as an engineer, I knew something was wrong.   Let's let them replace the expensive as hell tranny and see if it stops the noise.   I feel like GM screwed the engineering up on something and is hoping no one finds out.   Glad I'm not them.   I hate to explain to my maker how I screwed tons of people some day.    F'n BS.   

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • If what you are doing works, keep doing it:   4LO (Four-Wheel Drive Low) should only be used in extreme low-speed, high-torque situations such as deep mud, heavy snow, steep rock crawling, or extreme inclines/declines, and you must follow the correct engagement procedure to avoid drivetrain damage. Intended Use Cases Deep mud or snow where traction is extremely poor and you need maximum torque to get unstuck Trucks Only+1. Rock crawling on steep, uneven terrain forum.fullsizechevy.com+1. Extreme inclines or declines where you need to control speed and maintain traction solutionsphere.blog. Heavy towing in low-traction conditions (e.g., deep sand, ice) carclubsusa.com.
    • Hi,   I work a steep boat landing that has patchy blacktop going down the hill and soft sand/gravel at the bottom. Due to low water levels, it's not always possible reach the blacktop. I've had to help several people get out this year already and with fall coming, I'm anticipating more. I always use 4L. There was a gentleman there today with a 2500 HD (actually 2 - him and his son both have them) and they were trying to get his son's wake boat out. This gentleman swears that you should use 4H in the soft gravel. Says he was a farmer and you always use higher gear when stuck. I was wonder what your thoughts on this are? If I'm wrong, it would be good to find out before things get busy.
    • Looking for feedback from users of roll up aluminum slat bed covers who have had it for more than 3 years. I prefer the aluminum slat style over supported vinyl covers due to security and the capacity to support a light load. The slight loss of bed opening when rolled up is not an issue. Presently have BAK Revolver the "industrial grade vinyl overlay" on mine is shrinking & coming loose at the rear and on both sides in addition to cracking at some of the folding joints. Truck lives outdoors in NC latitude. Can't justify the steep price to replace it with another one if that's the expected lifespan. Do you have a better alternative?
    • Thanks, your last sentence is the root of my problem, outdoors truck and southern latitude = UV overload. Looking at replacing with Rough Country powder coated aluminum slat roll up model. 
    • I’m looking at putting a lift in my 2024 gmc sierra 1500 elevation trim, has anyone had any luck with fitting a bigger tire under the rear for a spare?? Was gonna go with a 4 inch zone lift Also what wheel and tire size setup are you all running? Wondering if I can get away with keeping around the stock size a 33 inch, and just get some new wheels to have enough back spacing then I can just keep my original spare tire I have under the truck now.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...