Jump to content

Fuse for Memory Seat switch?

trammd

By trammd
in Troubleshooting & Recalls

 Share

Recommended Posts

trammd Enthusiast

trammd

Posted
Posted

Hi, does anyone know if there is a fuse for the door switch that controls the memory seats in my 2014 Silverado LTZ Z71?

I have NO functions and the backlight doesn't work on the switch. This is a brand new switch, I just replaced it as I was thinkinking the switch was bad but now???????

 

Where and what # fuse is it?

The power seat functions fine....Just no memory functions and the switch does not light up so maybe fuse related???

 

Thanks!

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted
4 hours ago, trammd said:

Hi, does anyone know if there is a fuse for the door switch that controls the memory seats in my 2014 Silverado LTZ Z71?

I have NO functions and the backlight doesn't work on the switch. This is a brand new switch, I just replaced it as I was thinkinking the switch was bad but now???????

 

Where and what # fuse is it?

The power seat functions fine....Just no memory functions and the switch does not light up so maybe fuse related???

 

Thanks!

Just throwing it out there, do you have all of the settings in the MyLink set to on? Does the new switch "beep" when you push the buttons?

trammd Enthusiast

trammd

Posted
  • Author
Posted

NO beeps, No light. I have tried with the settings on or off in Mylink......Nothing. Just FYI mylink settings are just for "auto memory recall" on or off and Easy exit " auto " settings. even with those disabled in Mylink you should still be able to set and recall seat positions manually with the memory switch.

 

This is curious, should either one or both of my keyfobs be programmed driver "one' or driver "two" for the memory seats to work????  I ask because when I start my truck it doesn't say driver 1 or 2 with either of my 2 keyfobs. Maybe someone can answer that for me. Do you get a driver one or two message on the DIC when you use your keyfobs???

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted
4 minutes ago, trammd said:

NO beeps, No light. I have tried with the settings on or off in Mylink......Nothing. Just FYI mylink settings are just for "auto memory recall" on or off and Easy exit " auto " settings. even with those disabled in Mylink you should still be able to set and recall seat positions manually with the memory switch.

 

This is curious, should either one or both of my keyfobs be programmed driver "one' or driver "two" for the memory seats to work????  I ask because when I start my truck it doesn't say driver 1 or 2 with either of my 2 keyfobs. Maybe someone can answer that for me. Do you get a driver one or two message on the DIC when you use your keyfobs???

I don't think that there are messages, but the truck does recognize the fobs, so if you have different setting for 1 and 2 it will adjust to which fob is being used. Do the other switches on the door work ok?

trammd Enthusiast

trammd

Posted
  • Author
Posted

yes ALL other door switches work great and are backlit. Today when I had the door panel off to install the new switch I looked at everything as far as the wiring etc and it all looked good.

This has really got me scratching my head.

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted (edited)
2 hours ago, trammd said:

yes ALL other door switches work great and are backlit. Today when I had the door panel off to install the new switch I looked at everything as far as the wiring etc and it all looked good.

This has really got me scratching my head.

Do you have the ability to check if there is power coming to the switch? Never mind that question, does the heat function work, think I am getting close to finding the problem. 

Edited by JimCost2014
trammd Enthusiast

trammd

Posted
  • Author
Posted

Yes I do.if I knew which wire was supposed to be powered at rest I could back probe the switch or just unplug the switch and check for power signal at the harness plug. Anyone have a wiring schematic?

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted
11 hours ago, trammd said:

Yes I do.if I knew which wire was supposed to be powered at rest I could back probe the switch or just unplug the switch and check for power signal at the harness plug. Anyone have a wiring schematic?

Thinking the fuse you are looking for powers the memory seat function/switch and the heat function of the power seats.

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted (edited)
20 minutes ago, trammd said:

Heat function is good. Where can I find that fuse? Door jam or underhood fuse center?

Found this: The only fusable protection that I can locate is the 30A circuit breaker under the dash.
My thoughts are that the circuit breaker is protecting a blown control module for the seat functions. Is this easily accessable?

Edited by JimCost2014
Jaychevy81 Enthusiast

Jaychevy81

Posted
Posted

The only thing is it’s not just memory seat it also adjusts pedals, mirrors. So it could be elsewhere maybe. Have you tried disconnecting the battery for a min.


Sent from my iPhone using Tapatalk

trammd Enthusiast

trammd

Posted
  • Author
Posted

I wonder if there is a bcm just for the memory controls? Or if there memory function is controlled by the main body control module?

Jaychevy81 Enthusiast

Jaychevy81

Posted
Posted

I do know this it does go through diff modules. Did you try the second Key driver one driver 2. I would disconnect the battery for a min if you didn’t already try this.


Sent from my iPhone using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      first oil change - 2026 2500HD gas

      By Chuck FB · Posted

      Indeed a proper drain tap or drain valve with adapter that has a hose on it that opens up the valve as the adapter goes on is a slick setup and have that for certain highway tractors etc and other equipment that came from the factory with a tap but this L8T is pretty darned good other than me doing it on the floor and easy to touch hot exhaust and am not as agile as I used to be !. If I really want to pull a hot filter on an engine I will use an insulated set of thick neoprene gauntlet gloves but I am not in the hurry I used to need to be so things are done more relaxed and in theory somewhat safer ... I think LOL.    And as I mentioned the unique shape of the Amsoil 1 quart containers, while they might not work as well as an offset pour spout container for some awkward engine location applications, they are working a lot better with my Lisle funnel kit because of how they prop up on all four corners when upside down resting on the rim of the funnel where the typical quart container would never stay put without holding onto it. 
    • mrbflat
      Clunk when coming to a stop... driveshaft/slip yoke? Mechanic couldn't recreate it

      By mrbflat · Posted

      Well, I just hit 100K a few weeks back, and I can honestly say I have not had any major issues with my '21 5.3 Crew cab.  I have done most routine maintenance, oil changes, air filter, tire rotations, and a transmission drain and filter change (not even a full flush).  A couple of months ago, I started experiencing the dreaded CLUNK when coming to a stop, sometimes hard enough to literally push the truck forward! After researching here and in other forums/youtube videos, etc, I was thinking it's the slip yoke. I finally had a chance to take it to my local mechanic today, and he was not able to recreate the issue.  Amazing, since it does it nearly every time I drive.  He also said he can't simply grease my slip yoke/driveshaft splines, because I have a 1 piece driveshaft.  I am not sure what else I can do.  Has anyone else had this issue or have any idea what else it could be?
    • Black02Silverado
      first oil change - 2026 2500HD gas

      By Black02Silverado · Posted

      This is where the Fumoto drain valve comes in handy.  No mess and able to change oil hot, like right off the interstate hot.  Flows nice and you can direct it into a container. As for the oil filter, I use an old dixie cup or plastic one from McDonalds. It contains the oil as you pull the filter down and not all over your hand.
    • Black02Silverado
      Which 2027 engine will you choose?

      By Black02Silverado · Posted

      Well, if it did change from lifters to rocker arms, at least it would be easier to fix as they fail.
    • Black02Silverado
      HighMileage oils or stay with Dexos 1 ?

      By Black02Silverado · Posted

      Doesn't hurt to try.  It's my understanding that you have to run it at least 4 or 5 oil changes for things to get clean.  Think about it, your engine didn't get dirty in just an oil change so over time it will slowly clean. It's the safest way to do it and not have seal issues.      I remember  a product that came out a long time ago, AutoRX, it was an additive you put in the oil and then drove for 3k miles. Some saw improvements and some didn't. It was suggested to use a non synthetic with it at the time. Same observation, use a couple oil changes and give it time to work. It also stated it worked best if you could drive on trips to keep the oil hot.  I'm sure if you ask AI it could tell you all about it.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...