Jump to content

Recommended Posts

Posted

84942073 is the number I gave to the dealer. I just looked up the individual parts and it seems the big holdup is the 2 bolts you need. It's the only part number I'm seeing an issue with.

 

Sent from my SM-N960U using Tapatalk

 

 

 

21aaed6d1e1bfd1d7e1aecb57a4c23c4.jpg

Posted

Well ordered 84942073 from gmpartsdirect.com,  from everything I researched it should be the the correct kit for both the 1500 and the 2500HD.

Posted
Well ordered 84942073 from gmpartsdirect.com,  from everything I researched it should be the the correct kit for both the 1500 and the 2500HD.

Your order will be canceled by gmpartsdirect.com within a day or 2. Scroll up to post #205.

 

Sent from my SM-N960U using Tapatalk

 

 

 

Posted

Don't waste your time with the internet parts sites (gmpartsdirect.com) for lookups on this kit.  Go to your dealer and provide them with the matrix and ask them to search the GM global P/N list for these 'kits'.  I had similar experiences online and over the phone until I physically went to the dealer's parts department.  Lastly, feel free to email the GM up fitter to verify if new numbers exist.  I found them to be very responsive.   Had they not provided me with the parts matrix to show the dealer (and make sure you have a competent parts person with a decent attitude helping you) I would not have been successful procuring them.

Posted

I may have found a kit. I'll keep everybody updated once I can confirm.

Sent from my SM-N960U using Tapatalk

Posted (edited)

Guy, do not use the web to order this kit. Go directly to the dealer. I ordered the appropriate upgrade kit from the upfitter web site. It came on Friday, ordered three days prior. The kit came with everything you need to perform the upgrade. I just finished about an hour ago. It took me 2.5 hours. I did not use the new knee bolster though, I just cut the hole in my existing one. Worked out perfect. Everything works as it should, the back lights, the on lights, and each wire has power. real easy install, just take time. I hope this helps.

 

 

D9B26A93-4917-4102-A979-46CB0D6CB64C.png

Edited by Maximus Arulius
Posted

Its considerably faster if you skip the knee bolster. You have to take the whole radio out pretty much.

Having a wire grommet or wire poking tool thing is a huge help.

Sent from my SM-N975W using Tapatalk

Posted
Its considerably faster if you skip the knee bolster. You have to take the whole radio out pretty much.

Having a wire grommet or wire poking tool thing is a huge help.

Sent from my SM-N975W using Tapatalk


Would a paperclip help? Asking for a friend.

Sent from my SM-N960U using Tapatalk

Posted

If you order the aux switches when building the truck at the dealer, does the factory build it that way,or does the dealer/ hack/ tech install them?

Posted

Received a message earlier today that my lead on one of these kits was a bust. Again, nationwide backorder. Called the dealer as recommended a few posts up. There is no new part number. I also provided the parts numbers for all items in the kit is provided by GM Upfitter. Every part number except for 1 is a special order out of 1 of 3 GM warehouses. Since they're special order I don't have much faith in being able to get everything. The one part that wasn't special order happens to be in my dealer's inventory. Don't get too excited. It's bolts that are widely used in GM vehicles, so most dealers should have them.

Sent from my SM-N960U using Tapatalk

Posted

Just got another call from my dealer parts guy. They found a dealership in the US with kit number 84942073. They reached out to that dealer and that dealer refused to sell the part. Bad news for me may be good news for you if you're in the DFW area. Classic Chevrolet is the dealership with the only available kit in the country for trucks with the black interior and push button start.

In the meantime, I've asked my dealer to get all the parts that come in the kit. He believes there should be no trouble getting them since they show Special Order instead of Backorder. The parts are spread out between 3 GM warehouses: Lansing, MI; Reno, NV; and Los Angeles, CA. He was even willing to beat the online prices from GM Parts Online and GM Parts Direct when you factor in the added cost of shipping from those online stores. I'm looking at about $260 + tax.

Sent from my SM-N960U using Tapatalk

Posted
1 hour ago, Transient said:

Just got another call from my dealer parts guy. They found a dealership in the US with kit number 84942073. They reached out to that dealer and that dealer refused to sell the part. Bad news for me may be good news for you if you're in the DFW area. Classic Chevrolet is the dealership with the only available kit in the country for trucks with the black interior and push button start.

In the meantime, I've asked my dealer to get all the parts that come in the kit. He believes there should be no trouble getting them since they show Special Order instead of Backorder. The parts are spread out between 3 GM warehouses: Lansing, MI; Reno, NV; and Los Angeles, CA. He was even willing to beat the online prices from GM Parts Online and GM Parts Direct when you factor in the added cost of shipping from those online stores. I'm looking at about $260 + tax.

Sent from my SM-N960U using Tapatalk
 

My local dealer quoted me over $240, it was only $137 on gmpartsdirect.com (Which is a SC dealership) I got it delivered to my door in less than a week from them.

Posted
On 1/12/2021 at 5:53 AM, John Sarappa said:

If you order the aux switches when building the truck at the dealer, does the factory build it that way,or does the dealer/ hack/ tech install them?

Bump

Posted

Called my local dealer on  1/8 to order late. Order was placed 1/11 arrived 1/13... no issues part # 84942071...  162.96 with taxes... dont know why everyone is having problems...

 

Now just have to install.

20210115_085021.jpg

20210115_085005.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,914
    Total Members
    8,960
    Most Online
    AidenVorpagel
    Newest Member
    AidenVorpagel
    Joined
  • Who's Online   3 Members, 0 Anonymous, 1,347 Guests (See full list)


  • Latest Articles

  • Posts

    • 10 Ford and Chevy engines proven to reach 300,000 miles   You may note a common 3K OCI on this list of gas motors. I skipped over the diesels. Dh'O. 
    • Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.
    • 286,740 Mile Services   8/6/2026   New AC Compressor. Refrigerant oil and dye, evacuate and charge system.  New exhaust system from cat back.  New Iridium plugs plus replace #3 coil Repair/rewire headlamp wiring (passenger side) and replace all forward bulbs. Polish lenses of both assemblies.  Pull rear rotors, clean and adjust parking assembly. Inspect, clean and grease front calipers. Check pads and shoes.  4 wheel power bleed of brake system. Dot 4 Reset idle speed 50 rpm higher New Serpentine belt.    Will need new pads in the rear in about 5K more miles.    Tax Title and License out the door just short of a grand.    AC clutch had bitten the dust. 1 year warranty on the pick and save replacement. Thing will make a Polar Bear cry Uncle.  He spent quite some time on the wiring. It was in the harness and he does nothing half. I got off cheap. I have considerable more light down the road. Sylvania Silver Star replacements.  Gas seal between the porcelain and shell of plug #3 was blown, cooked the coil. That was the cold miss.  Love the new exhaust. I can sneak into the neighborhood again.  Nice to have a working parking brake again. Belle Tire never got it done. That was disappointing.    This was one of her bigger bills and still way cheaper than a payment even given the oil consumption. This thing cost me under a hundred a month in repairs and normal routine costs. What is my incentive to replace it? 🤔           
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...