Jump to content

Fuel Filler Housing Bolts

Steven York

By Steven York
in Troubleshooting & Recalls

 Share

Recommended Posts

Steven York Enthusiast

Steven York

Posted
Posted

For future reference, I will now be obsessively checking the gas cap / filler neck on future trucks... I bought my truck a few months ago, and recently noticed that the filler neck isn't actually supposed to be wobble. It's supposed to have a couple screws holding it to the body.

 

I haven't been able to find the specific screws/bolts I need for my 2014 1500 LT Z71 CCSB w/ flexfuel. If anyone is kind enough to post pictures of their filler housing and bolts, or knows what hardware goes in there, I would greatly appreciate it.

jweb Enthusiast

jweb

Posted
Posted

I have a set of the 3 screws that hold the neck to the housing. If that’s what you need just send me your address and I will send them to you. 

86BE017C-D440-4276-A1DB-7DE146C176C4.jpeg

Steven York Enthusiast

Steven York

Posted
  • Author
Posted
On 10/26/2019 at 11:55 AM, jweb said:

I have a set of the 3 screws that hold the neck to the housing. If that’s what you need just send me your address and I will send them to you. 

86BE017C-D440-4276-A1DB-7DE146C176C4.jpeg

Dude! thanks! The bolts I need are from the housing to the actual body panel (I can see they are missing by opening the fuel door). Not sure if we're talking the same thing...

jweb Enthusiast

jweb

Posted
Posted
7 minutes ago, Steven York said:

Dude! thanks! The bolts I need are from the housing to the actual body panel (I can see they are missing by opening the fuel door). Not sure if we're talking the same thing...

Sorry these hold the metal neck to the housing. Doesn’t sound like that’s what you need. 
Unfortunately I don’t have the body to housing bolts. 

  • 8 months later...
Sam Kahoun New Member

Sam Kahoun

Posted
Posted
On 10/25/2019 at 8:46 AM, Steven York said:

For future reference, I will now be obsessively checking the gas cap / filler neck on future trucks... I bought my truck a few months ago, and recently noticed that the filler neck isn't actually supposed to be wobble. It's supposed to have a couple screws holding it to the body.

 

I haven't been able to find the specific screws/bolts I need for my 2014 1500 LT Z71 CCSB w/ flexfuel. If anyone is kind enough to post pictures of their filler housing and bolts, or knows what hardware goes in there, I would greatly appreciate it.

Did you ever figure out what the bolts were and how to get them

  • 1 year later...
Tyler Breazeale New Member

Tyler Breazeale

Posted
Posted
On 10/26/2019 at 11:55 AM, jweb said:

I have a set of the 3 screws that hold the neck to the housing. If that’s what you need just send me your address and I will send them to you. 

86BE017C-D440-4276-A1DB-7DE146C176C4.jpeg

I know I’m 2 years late but I am missing all 3 of these and I can’t find them or a part number anywhere. Im hoping that either you still have them or that you know where I could get some. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • lanaderay
      5 Best Slide Down Gameplay Tips! 

      By lanaderay · Posted

      Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • lingyuair
      Why I Recommend a Desiccant Air Dryer for Cleaner, Drier Compressed Air

      By lingyuair · Posted

      If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      I went another direction after losing a trailer tire, thanks to not being able to access air at ANY of the 5 gas stations and garages I stopped at prior, with a Toyota Tacoma onboard, 50 miles from the Canadian border. They were either out of order, access was blocked, or the hose a few feet too short and I couldn't get any closer without risking damage to someone's property.   https://postimg.cc/gallery/X5QJ55w
    • Another JR
      Remote Start Noise 2024 2500 HD Gas

      By Another JR · Posted

      I took a 12 second video on my iphone but the file is too big to upload. I will have to figure out how to extract the audio or just do another start with an audio recording. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...