Jump to content

Tailgate LED light Bar Install


Recommended Posts

Any one install a Putco Blade or OPT7 60" Tailgate light bar on a 2019 Silverado 1500 RST ? I was looking at the space in between the bumper and tailgate bottom which doesn't look to wide enough with that lip the bumper cover has.

Link to comment
Share on other sites

3 hours ago, TNT799 said:

Any one install a Putco Blade or OPT7 60" Tailgate light bar on a 2019 Silverado 1500 RST ? I was looking at the space in between the bumper and tailgate bottom which doesn't look to wide enough with that lip the bumper cover has.

on my 2015 I mounted it to that lip - great light output , my 2019 mount between tailgate and bumper - light output is OK . If I did it over I mount it to thee lip . Hope this help .

Link to comment
Share on other sites

I installed a Putco blade 60" in the space between the bumper and tailgate and didn't like how much it restricted the viewing angles of it.  I ended up taking it out of there and mounting it to the plastic lip on the bumper and am really happy with it now.

Link to comment
Share on other sites

8 hours ago, Darmichar said:

I installed a Putco blade 60" in the space between the bumper and tailgate and didn't like how much it restricted the viewing angles of it.  I ended up taking it out of there and mounting it to the plastic lip on the bumper and am really happy with it now.

Does it adhere to the plastic pretty good?  Also how did you wire yours up?  Do you have a pic?  Thanks!

Link to comment
Share on other sites

First of all, my truck is a 2018 so some stuff may vary. 

I wiped it down with 90% rubbing alcohol and used some 3M double sided foam tape the entire length of the light bar to stick it to the plastic.  It's is stuck very well and I don't see it coming off any time soon.

 

I purchased the following:

Putco Blade 60" - https://smile.amazon.com/gp/product/B01N2AP1A1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Curt Trailer Harness - https://smile.amazon.com/gp/product/B007EA6WQU/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Reese Tow Power 5-pin connector - https://smile.amazon.com/gp/product/B0008G1PMS/ref=ppx_yo_dt_b_asin_title_o08_s01?ie=UTF8&psc=1

 

I cut the 4 pin plug off the Putco bar and soldered in the 5-pin connector I purchased to pick up the reverse wire.  It makes for a much cleaner install and I could return it to stock in about 5 minutes if I need to.

Edited by Darmichar
Link to comment
Share on other sites

First of all, my truck is a 2018 so some stuff may vary. 
I wiped it down with 90% rubbing alcohol and used some 3M double sided foam tape the entire length of the light bar to stick it to the plastic.  It's is stuck very well and I don't see it coming off any time soon.
 
I purchased the following:
Putco Blade 60" - https://smile.amazon.com/gp/product/B01N2AP1A1/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Curt Trailer Harness - https://smile.amazon.com/gp/product/B007EA6WQU/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
Reese Tow Power 5-pin connector - https://smile.amazon.com/gp/product/B0008G1PMS/ref=ppx_yo_dt_b_asin_title_o08_s01?ie=UTF8&psc=1
 
I cut the 4 pin plug off the Putco bar and soldered in the 5-pin connector I purchased to pick up the reverse wire.  It makes for a much cleaner install and I could return it to stock in about 5 minutes if I need to.


Thanks that’s similar to what i did on my 2010.


Sent from my iPhone using Tapatalk Pro
Link to comment
Share on other sites

Here's my Putco............wired it with the Curt harness but the truck didn't like it, kept getting some kind of trailer fault..... so I bought the harness that Putco sells and it works perfectly.

 

1044741547_lightbartailgatesmall.thumb.jpg.3aea8da5a0b82de95ee5c31f6bcecb06.jpg

Edited by BlackLS
Link to comment
Share on other sites

On 1/9/2020 at 8:00 PM, BlackLS said:

Here's my Putco............wired it with the Curt harness but the truck didn't like it, kept getting some kind of trailer fault..... so I bought the harness that Putco sells and it works perfectly.

 

1044741547_lightbartailgatesmall.thumb.jpg.3aea8da5a0b82de95ee5c31f6bcecb06.jpg

Could you possibly get a photo up close to the lip/bottom of tailgate ?

Link to comment
Share on other sites

On 1/5/2020 at 10:24 PM, Darmichar said:

I'll get some pictures of it installed on the lip tomorrow.

 

Would like to see pic of where you installed it.  Close up please.  Thanks!

Edited by J2Jones
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...

Important Information

By using this site, you agree to our Terms of Use.