Jump to content

performance muffler

BillCT
 Share

Recommended Posts

BillCT Enthusiast

BillCT

Posted
Posted

Hello, I just bought a 2020 GMC Sierra 1500 Elevation. It has the duel exit tips in the bumper. Has anybody just put a louder muffler on yet? Borla say it will drone if I don't buy a Cat back sys. 

CamGTP Senior Enthusiast

CamGTP

Posted
Posted

Borla just wants your money.

 

Lots of member have either chopped the stock one out or swapped it with something they like. You'd think they should be plenty of sound clips on the youtubes because these trucks have been out for a while now. I'd maybe look there for possible muffler options.

  • Like 1
Bob Ross Enthusiast

Bob Ross

Posted
Posted
10 hours ago, BillCT said:

Hello, I just bought a 2020 GMC Sierra 1500 Elevation. It has the duel exit tips in the bumper. Has anybody just put a louder muffler on yet? Borla say it will drone if I don't buy a Cat back sys. 

I’m getting a Flowmaster installed today. Just a muffler swap. Borla is a good brand but they are selling a car back system for $1100 and just want your money. Hey the Flowmaster is like $100 bucks on Amazon. If it drones I will check out a cat back system. But since this is not my first rodeo I will I tell the Flowmaster and save the extra money for other parts. 

BillCT Enthusiast

BillCT

Posted
  • Author
Posted
3 hours ago, Bob Ross said:

I’m getting a Flowmaster installed today. Just a muffler swap. Borla is a good brand but they are selling a car back system for $1100 and just want your money. Hey the Flowmaster is like $100 bucks on Amazon. If it drones I will check out a cat back system. But since this is not my first rodeo I will I tell the Flowmaster and save the extra money for other parts. 

Let me know what muffler you put on and how you like it, Thanks

BillCT Enthusiast

BillCT

Posted
  • Author
Posted
9 hours ago, CamGTP said:

Borla just wants your money.

 

Lots of member have either chopped the stock one out or swapped it with something they like. You'd think they should be plenty of sound clips on the youtubes because these trucks have been out for a while now. I'd maybe look there for possible muffler options.

Thanks

Slizzo Enthusiast

Slizzo

Posted
Posted

If you get drone, just look up "helmholtz resonator". Calculate the length that it needs to be to target the RPM range in which you get drone then have it put on your exhaust somewhere there's room.

 

And presto, no drone!

Bob Ross Enthusiast

Bob Ross

Posted
Posted
13 hours ago, BillCT said:

Let me know what muffler you put on and how you like it, Thanks

I got the Flowmaster 50 series delta flow part #943051. Installed today with a few welds and some extra pipe. I have some video that I can splice together but it’s VERY deceiving. What you hear in the video is much less than in person. I will try to review below. 
 

Start up is louder than stock and the tone is deeper but it drops down quick with RPM and idle sounds very similar to stock. For this I would say stock sound level is a 2 and the Flowmaster is a 4 (out of 10 scale)

 

Inside driving is more noticeable. You can tell that you are no longer stock but it’s not overbearing. Stock sound is a big fat zero. As you know you almost have to floor it to hear that you have a V8. With the Flowmaster now you can hear the engine with normal driving. The good thing is that when you are playing the radio you won’t be drown out by an overly loud exhaust. Since I took out the flapper too I can now hear when the DFM kicks in and I’m not running in all 8 cylinders. The new trucks don’t show you how many cylinders you are working with but you will know if you change exhaust. So I’m short. Stock=O and Flowmaster =7 great sound when you want it no big drone and quiet when cruising. And pops and gurgles too when letting off the gas. 
 

Now let’s get to the real sound. Stock we know outside is not too bad but man these trucks are quiet. Revving stock is maybe 2-4 decibel level and some tone. You throw this Flowmaster in and you are at a 9 easy. I’m not sure how they keep the drone down and nice and quiet inside while sounding like it’s in beast mode standing behind it. I had my wife rev a few times and wow I was not expecting. Deep tone and loud enough that everyone knows you don’t have a stock exhaust. 
 

like I said before the video won’t do it justice like being in person. I highly recommend. I wanted something that I could hear when I get on it but I didn’t want a loud drone when cruising. I’ve had the Flowmaster 40 and it sounded great but was just too loud for my liking inside. While the 50 series delta flow is not as loud as the 40 series I think it’s a good balance between sound and quiet. 

  • Like 1
  • 7 months later...
Jp sierra Enthusiast

Jp sierra

Posted
Posted
On 2/2/2020 at 2:48 PM, BillCT said:

Hello, I just bought a 2020 GMC Sierra 1500 Elevation. It has the duel exit tips in the bumper. Has anybody just put a louder muffler on yet? Borla say it will drone if I don't buy a Cat back sys. 

I just had a borla muffler swapped into my 2020 TB with the 5.3, I left the flapper to avoid any drone , which I had experienced with my 17 Sierra with the exact set up... well once it was installed my truck sounded just a notch louder above stock I was disappointed ... so I used some exhaust tape and covered all mess screens (resonators)  and wow it’s now sounds like expected ... quite off the pedal but nice deep growl on the pedal ... 

67740AE8-8EDB-457A-8D44-6C6DE09B76C3.jpeg

596BF08C-34A4-4504-8F48-4C8E5A521F9D.jpeg

  • 3 months later...
kodiakdenali Enthusiast

kodiakdenali

Posted
Posted (edited)

I know you were looking at just a muffler swap but in case if helps you, or anyone else, with your exhaust decision, you can hear what the Borla ATAK system sounds like in this video. Jump ahead to 10:55 just to hear the exhaust.

 

My impressions: It's loud. cold startup is louder than I'd really like but that goes away quickly when things warm up. I love the tone of it. I hear no done at all. The ATAK catback deletes the flapper (my 6.2 only had 1 flapper) and even without it, no drone. I can't tell when the DFM kicks in, there's nothing that my ears can detect. interior wise its plenty loud when you really get on it, but when just cruising its actually pretty mellow. You can definitely tell you're sitting behind a V8 but I can listen to the stereo without turning it up excessively, I can easily have a conversation with a passenger. I like the burble at idle.

 

The only thing I can't comment on yet is will it be too loud under heavy load, like hauling a trailer up a hill. I haven't tried that yet.

 

Borla actually makes the GM performance exhaust, I don't know how that collaboration took place but I'm sure GM made sure Borla built something that would perform well on the truck, especially when it comes to unpleasant noise from DFM and such. I'm sure that knowledge carried through to other cat back models.

 

 

Edited by kodiakdenali
RadoPhan Enthusiast

RadoPhan

Posted
Posted
Did leaving the flapper on with the ProXS eliminate drone? I removed the flapper and installed the Borla and the drone is awful. Extremely loud inside the cab. 

I have the ProXS, flapper still on and all resonators covered with no drone at all.


Sent from my iPhone using Tapatalk

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • bwiese
      seat base height *lowering* (base 40/20/40 seat, 2026 1500 WT std cab)

      By bwiese · Posted

      Folks, Have a great new 2026 WT  (std cab, 2.7/4WD) w/base 40/20/40 mech adj bench "fake buckets"  (with lower and upper center console) heavy vinyl seats.  Overall the seats are very comfortable and the vinyl is heavy and appears less likely to 'split out'. Am very tall (6'5")  + a bad back/osteporosis/former hyperparathyroidism so ease/range of movement is a bit restricted.  The truck rides a bit high and I use a nerf step bar w/my left foot to step in, then I put right foot/leg in, drag my butt in  & get seated.  Worked fine in my 2018 RAM quadCab. But I end up dragging my butt over the left raised sidecushsion area of vinyl seat, and due to texture there's fair amount of traction on slide inward.  (ArmorAll didn't improve.) If the seat were even ~1/2" - 3/4" lower it'd be helpful, but base seats just have the forward/backward underseat bail and the side lever for tilt which really doesn't affect seat height.   I really don't want to 'de-puff' the left side sidecushion forming the  fake 'bucket'. I know one company sells 'seat elevator blocks':  but is there a simple way of lowering the height of the driver seat instead?   Thanks Bill W San Jose  
    • bwiese
      on-wheel cellphone control: 2026 1500 WT (2.7L 4WD std cab)

      By bwiese · Posted

      I have a basic 2026 1500 WT  (2.7L/4WD reg cab shorttbed). Comfy, generally happy with electronics/radio - but is there a way I can add switches to steering wheel right-side position (curr. empty) so I can adjust volume, push phone button to voice dial, etc? Bill W San Jose  
    • Tyler Gibbs
      Travel Trailer 2024 2500 HD 6.6 Gas Engine ?

      By Tyler Gibbs · Posted

      The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • sFrank
      2026 Silverado Range AFM DFM ECU loaction

      By sFrank · Posted

      So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • No F-bdy Bs
      Dave's Auto (custom engine builder) tear down of L8T

      By No F-bdy Bs · Posted

      Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...