Jump to content

No Trailer Connected Issue

Leon Baehre
 Share

Recommended Posts

Leon Baehre Enthusiast

Leon Baehre

Posted
Posted

running a 2020 2500 Duramax LTZ dbl cab pulling a 20foot travel trailer.  Dealer setup TPM with no issues. We are on our first road trip, going to be out for 7 weeks and about 4000 miles.  Truck has 1700 miles and is a dream to travel with. Tried to check the TPM and am getting the message that there is no Trailer Connected. The trailer is connected, trailer lights are working, trailer brakes working. How to resolve?

MTU Alum Enthusiast

MTU Alum

Posted
Posted

Did you happen to hook the trailer up and plug in your 7 way connector when the truck was running?  The best way I have found is to shut off your vehicle when you are hooking up.  Hook up the trailer and chains before plugging in the seven way.  Ideally, plug the seven way in after the truck goes asleep.  Easiest way to tell the truck is asleep is if the light by the onstar symbol is out.  

 

I have also seen after you start the vehicle it may not recognize a trailer is attached until you depress the brake pedal.  

 

Hope one of these help you out.

 

#iworkforGM 

Leon Baehre Enthusiast

Leon Baehre

Posted
  • Author
Posted

Hope you have the solution.  I did have the truck running when I hooked it up.  I just went out and unhooked the trailer wiring.  I will rehook in the morning before I start the truck.  I will follow-up tomorrow with the result.  Thank You very much for the quick response. Cheers

hotairgypsy Enthusiast

hotairgypsy

Posted
Posted

i have several trailers i hook/unhook too and i run into it saying i have no trailer hooked up right after i just hooked up the trailer...i just go to the trailer profiles and select my trailer and all my info is there

Mi99z71 Enthusiast

Mi99z71

Posted
Posted

Does the trailer have LED lights? I read in another topic that sometimes there isn't enough load on the lights to sense the trailer. There is an adapter that one can purchase on Amazon. It plugs into the 7 way plus and then you plug your 7 way trailer into it. Puts electrical load on truck to see it there.

https://www.amazon.com/gp/aw/d/B00C4AYR3U?psc=1&ref=ppx_pop_mob_b_asin_title

 

On the plus side, you can run just the adapter without a trailer and when you turn on signals, if you have the 360 cameras- the truck will switch and display that side of truck's blind spot in the radio.

 

  • Like 1
  • 4 weeks later...
Leon Baehre Enthusiast

Leon Baehre

Posted
  • Author
Posted

Just returned from a 4 week trip to Texas with the travel trailer and had numerous problems with "no trailer connected" issues.  Truck always recognized trailer connection, lights work, gain and tow mode restored, but often the "no trailer connected" when I check trailer for TPM. Doesn't matter if truck is off when plugging in the trailer. If I stop for fuel and unplug and replug, it might start working.  We do not have LEDs on the exterior trailer lights.  I will take the truck in for its first service once the pandemic passes and hopefully they can figure it out. Of course that will require dragging the trailer along and surely, it will work then. PIA. Also get numerous warnings about a failed blinker which if false of course.

  • 1 year later...
Thomas Karr New Member

Thomas Karr

Posted
Posted

When I plug my 2019 GMC 1500 Sierra into my travel trailer it shows no signal to my rear facing furion camera on the trailer. I can put a jumper in my seven way plug on the trailer and make the camera show on my plug in monitor. As soon as I plug it into my truck with the lights on and truck running it shows no signal to my camera. My RV supplier told me mine was the third GMC/Chevy 2019/2020 trucks in the last two weeks with this problem. Glich is in the vehicles. What’s the problem. My trailer is presided for the furion camera.

  • 1 month later...
Leon Baehre Enthusiast

Leon Baehre

Posted
  • Author
Posted

 The No Trailer Connected issue has gotten more complicated.  I have a car trailer with LED lights and have the same issue. The dealer has been really good about trying to resolve the issue.  They replaced the ECM under the spare tire and the 7 pin connector.  We have the same issue even with the new components. Plus it is now worse, the system loses its memory of the pairing to the TPMS. We just returned from a 8 day trip from Michigan and had multiple issues, had to stop by a Chevrolet dealer midpoint in the trip to relearn the TPMS which they did very promptly.  Local Dealer is working with Chevrolet to come up with a solution. 

 

shadow gray 2020 hd Enthusiast

shadow gray 2020 hd

Posted
Posted

Having an issue with mine lately.  Trailer will be fine, then driving along will pop up no trailer detected.  Just this morning, my lights were on and brakes were working, then halfway to where I was going everything quit working and message popped up no trailer detected.  I pulled over and unplugged the 7 way plug and plugged it back in, still would not work.  Luckily, was just a short trip with my 22 ft equipment trailer and some oak logs.  

 

My electronics seem to be having some gremlins, having other non trailer related screwy issues as well.  Another complaint for the dealer.  

  • 10 months later...
Fast325it Enthusiast

Fast325it

Posted
Posted (edited)

Has anyone found a fix for these gremlins? I’ve got 27,000 miles on my 2019 Silverado and the “no trailer connected” issue just started with a snowmobile trailer I’ve towed many thousands of miles and had no problem. It has LED lights and everything functions normally when connected to other vehicles. I have other trailers with both incandescent and LED lights and those trailers all work fine. 

Edited by Fast325it
GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
On 8/8/2022 at 10:34 AM, Fast325it said:

Has anyone found a fix for these gremlins? I’ve got 27,000 miles on my 2019 Silverado and the “no trailer connected” issue just started with a snowmobile trailer I’ve towed many thousands of miles and had no problem. It has LED lights and everything functions normally when connected to other vehicles. I have other trailers with both incandescent and LED lights and those trailers all work fine. 

This is certainly not what we like to hear, Fast325it.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2019 Silverado. To do so, please send an email to [email protected] with ATTN: Fast325it/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s privacy policy, please visit https://www.gm.com/privacy-statement.html.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

  • 4 months later...
JakeJ New Member

JakeJ

Posted
Posted

2020 Sierra AT4, throwing no trailer detected, randomly. Lights not responding, no trailer brakes luckily it’s only a single axle, I have ruled out the wiring on the trailer. What can I do seems the truck has issues somewhere? 

  • 2 weeks later...
GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
On 12/29/2022 at 6:07 PM, JakeJ said:

2020 Sierra AT4, throwing no trailer detected, randomly. Lights not responding, no trailer brakes luckily it’s only a single axle, I have ruled out the wiring on the trailer. What can I do seems the truck has issues somewhere? 

This is certainly not what we like to hear, JakeJ.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2020 GMC Sierra AT4. To do so, please send an email to [email protected] with ATTN: JakeJ/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s Privacy Policy, please visit https://www.gm.com/privacy-statement.html. The information you provide may be monitored and recorded and is subject to the GM Privacy Statement.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

airbusdriver New Member

airbusdriver

Posted
Posted

Just ran into same thing with trailer lights. 2013 suburban trailer lights work on 4 place snowmobile trailer. When I try it with my 2020 GMC 2500HD AT4 I get no trailer connected. Brake controller works but no trailer lights on trailer work. This is the first trailer I have had an issue with on the GMC. I purchased truck used in May 2021 and it just turned over 30,000 miles, 36 month warranty just ended in Sept. The dealer is going to try a new light module except it will take a week and I wanted to pull the snowmobile trailer this weekend. No quick fix. Going to try either putting in LED lights and or unplugging some of the marker lights to get trailer draw down to work some of the lights. 

airbusdriver New Member

airbusdriver

Posted
Posted

Just ran into same thing with trailer lights. 2013 suburban trailer lights work on 4 place snowmobile trailer. When I try it with my 2020 GMC 2500HD AT4 I get no trailer connected. Brake controller works but no trailer lights on trailer work. This is the first trailer I have had an issue with on the GMC. I purchased truck used in May 2021 and it just turned over 30,000 miles, 36 month warranty just ended in Sept. The dealer is going to try a new light module except it will take a week and I wanted to pull the snowmobile trailer this weekend. No quick fix. Going to try either putting in LED lights and or unplugging some of the marker lights to get trailer draw down to work some of the lights. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,979
    Total Members
    8,960
    Most Online
    rayredbone
    Newest Member
    rayredbone
    Joined

  • Who's Online   1 Member, 0 Anonymous, 495 Guests (See full list)

  • Latest Articles

  • Posts

    • Grumpy Bear
      AFM Experience

      By Grumpy Bear · Posted

      Question @diyer2 on this line if you please. Are you saying the shudder is the system turning on and off at the frequency of the shudder? Guess I'm asking if you are saying you have seen it do this with the bi-direction scan tool in graph mode? If so have you been able to discern the 'trigger'. Something is telling to cycle rapidly.    My truck just started doing this recently. 197K on the clock. My response has been M5 anything under 55 mph. I treat it like a lugging stick shift. Gear down and let it spin a bit. Engauge M5, then tow mode and then M6 lets the trans stay in 5th but the AFM is active. Smooth like Skippy.    My thought was that as a machine ages the friction gets lower and as the system is load based, the lower friction would allow it to turn on at ever lower rpm until it reaches the lugging point. And yes I am ignorant of any minimum rpm requirement for the system. If you know that would be useful information.    As you know I run a Scan-Gauge II which allows me to watch the On/Off of the signal to the VLOM. While in the shudder mode I'm not seeing is cycle at that frequency or at all for that matter outside the triggers @newdude posted a few years back. Now is it possible that the refresh rate isn't fast enough to catch it? Maybe. It is why I asked my first question about graphing and trigging parameter.     As we have observed from members here the failure point is all over the map miles wise as you note yourself in your opening post. That by itself begs a few questions like fellows that comment on these lifters failing even after the system has been disabled. Long after. 😬   https://www.enginelabs.com/news/tech-tips-replacing-ls-active-fuel-management-lifters-with-melling/   The Gen5 lifters operate the same as the LS versions. In fact they are the same lifter.    https://www.enginelabs.com/tech-stories/sorting-out-gen-v-lt-lifter-failure-with-a-simple-valvetrain-fix/        
    • SwitchBladeSierra
      14-18 Sierra 1500 Heated Steering Wheel Help

      By SwitchBladeSierra · Posted

      UPDATE 2: Steering wheel control backlights and control of the cluster can supposedly be achieved by adding a wire to pin 20 of the cluster and tapping it to pin 2 of the main clock spring harness. I'm going to give it a shot - will update  
    • newdude
      Seems to be Missing a lot of Updates

      By newdude · Posted

      GM Global A pickups 2019-2022 can do OTA programming for the radio.  GM VIP (GM Global B) can do OTAs for almost every module on board.  So a 2022.5 and newer pickup can do OTAs for recalls like the 2.7 fuel flow recall.  EVs get OTAs that improve one pedal driving, radio issues, HVAC issues, updated battery management software, etc.     So age of the vehicle/what GM electrical platform its on will alter what amount of updates can be pushed on OTAs.  
    • Blade8971
      Upgrade to a 2026 AT4 with the 3.0L Duramax

      By Blade8971 · Posted

      Thank You.   So far my new ride is making me look like a genius for going with the 3.0L, as my first fuel refill occurred over three weeks from when I took delivery.  This engine combination is very amazing.  So far no issues and had not done a regen yet.
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      I am curious as to how much fluid you put back in the transmission ( assuming you had replaced the filter to compare to my findings ) and then went through the process of warming up the trans before pulling the check plug to drain out the excess and if you measured how much came back out.    I just found it surprising that some claimed a certain amount less fluid being put in and then draining some back out. The attitude of the truck as per if the surface is level and how the trucks stance is would make quite a difference since the check plug is right at the front of the transmission. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...