Bed extender with MultiPro tailgate?

JAEDEE · May 10, 2020

Has anyone tried using a bed extender with their multipro tailgate? I know the extender is built in to the gate, but I am looking for something to keep the groceries in one place when the gate is closed. The AMP ones all say "Excl multipro…" I feel like they should work, but would like to confirm this before I buy one. Thanks in advance.

loud_pipes · May 11, 2020

This doesn’t exactly answer your question, but I went with this:

https://www.ebay.com/itm/392233207636

It’s convenient, not too expensive, and pretty effective.

Sent from my iPhone using Tapatalk Pro

JAEDEE · May 12, 2020

Thanks! I honestly had not even thought about that.

Todd Brandt · September 30, 2021

I installed an Amp Research Bed Extender on my 2020 GMC 2500HD Duramax AT4 today and it has the MultiPro tailgate. It installed just fine with the MultiPro Tailgate, no issues.

Amp Research support told me it wouldn't work, and explained that they were worried about drilling into the carbon-fiber bed. I don't have the CarbonPro edition (I think that only comes on 1500 trucks).

Anyways, I had the Amp Bed Extender on my '15 2500HD too and loved it.

Hope this helps.

Jrodpic · March 12, 2022

Any updates on this? Had an AMP bed extender in our 2020 TB and loved it. Getting a 22 with multi flex. Hoping it will work in that as well.

cansled · March 13, 2022

Put my AMP bed extender from my 2018 Denali onto my At\4 with Milti-pro gate (not carbon bed) and installed and works exactly as it should. No problems at all.

Jrodpic · March 14, 2022

5 hours ago, cansled said:

Put my AMP bed extender from my 2018 Denali onto my At\4 with Milti-pro gate (not carbon bed) and installed and works exactly as it should. No problems at all.

Awesome. Thanks for the info!!

redwngr · March 14, 2022

On 9/30/2021 at 7:10 PM, Todd Brandt said:

I installed an Amp Research Bed Extender on my 2020 GMC 2500HD Duramax AT4 today and it has the MultiPro tailgate. It installed just fine with the MultiPro Tailgate, no issues.

Amp Research support told me it wouldn't work, and explained that they were worried about drilling into the carbon-fiber bed. I don't have the CarbonPro edition (I think that only comes on 1500 trucks).

Anyways, I had the Amp Bed Extender on my '15 2500HD too and loved it.

Hope this helps.

Not all short box 1500's are carbonpro.

Carbon pro is not available on standard bed or long bed 1500s'.

Multipro does not require carbonpro.

Edited March 14, 2022 by redwngr

reese · March 14, 2022

I also got the AMP RESEARCH bed extender for my 2020 Sierra Denali with Multipro. They make three different types. Not sure if all work with the Multipro tailgate but I can confirm the AMP RESEARCH BEDXTENDER HD SPORT works fine

Jrodpic · March 18, 2022

Maybe it has something to do with that weird old man bar they added to the bed? Our 2020 didn’t have that thing.

Jrodpic · March 18, 2022

Accidental double post

Edited March 18, 2022 by Jrodpic
Double post

reese · March 18, 2022

I think so. It's been a while since I was researching but I do recall hearing something like that. My 2020 does have the bar. If I recall correctly, that's what caused me to get the HD Sport instead of the HD Max. Can't say I miss that little bit of space gained with the HD Max.

Jrodpic · April 10, 2022

Just installed the HD max today. Was going to take the grab bar off but made the install and alignment of my soft tri fold cover easier so I left it on. No issues with clearance but you obviously can’t use the bar with the extender in. I will probably never use the bar so I don’t care, but that must be why they list it as not being compatible with multipro/multiflex.

Eric McBride · July 6, 2023

I know this is an older post but was wondering if anyone could provide pics of their bed extender with the "old man" bar installed. I contacted AMP Research and they said there would be clearance issues. I also have a Perragon cover and the bed rails extend 3.5" beyond the truck bed wall. I wonder if I will run into issue with clearance as well.

eppieguy · July 9, 2023

On 7/6/2023 at 9:59 AM, Eric McBride said:

I know this is an older post but was wondering if anyone could provide pics of their bed extender with the "old man" bar installed. I contacted AMP Research and they said there would be clearance issues. I also have a Perragon cover and the bed rails extend 3.5" beyond the truck bed wall. I wonder if I will run into issue with clearance as well.

It fits but you can’t unclip and put the handle up with the bed extender folded to the inside of the bed.