Who is running 22" Wheels? Step in please!

[Arkangel]

18 minutes ago, firedab said:

Yup, those are the wheel and tire specs, and no leveling kit, but I did turn the keys (bolts) two turns, have about an inch difference between front and rear. I’m going to work on mud flaps tomorrow, I’ll post when I get them done.

How does it ride?

 

Did you buy a bumper spacing kit or do a DIY?

[firedab]

Ride is similar, you can feel the bumps a bit more, nothing crazy. Not much louder with the Nittos either. I did the DIY route, may change them out for the actual kit, but it works...

[firedab]

So I bought the wider OEM mudflats and they are actually 2 pieces in the front. I took them apart and heated up the edge and folded it a bit to make it look better. So far so good, does not appear to be rubbing.

[Arkangel]

2 hours ago, firedab said:

So I bought the wider OEM mudflats and they are actually 2 pieces in the front. I took them apart and heated up the edge and folded it a bit to make it look better. So far so good, does not appear to be rubbing.

Can you give me the part number for those?

 

thanks 

[firedab]

Bought them with my points thru GM accessories website, not sure part numbers.

[Arkangel]

Only ones I can find are these but they dont look like 2 piece?

 

thanks again for your help

[firedab]

Yup, that's them... They come riveted together, so I drilled out the rivets and attached just the back section. 

[JayZed]

22x12 with 37x13.5x22 Nittos

[gSwift]

3 hours ago, JayZed said:

22x12 with 37x13.5x22 Nittos

That looks great... what lift? and what offset are your wheels?

[JayZed]

20 hours ago, gSwift said:

That looks great... what lift? and what offset are your wheels?

7" RC lift with 22x12 -44 Hostile Alphas

[kylant]

On 11/15/2020 at 4:50 AM, firedab said:

So I bought the wider OEM mudflats and they are actually 2 pieces in the front. I took them apart and heated up the edge and folded it a bit to make it look better. So far so good, does not appear to be rubbing.

 

can you post pics slightly further out from the truck?

would like to see how the entire flap looks

thanks

[firedab]

On 12/13/2020 at 10:36 AM, kylant said:

 

can you post pics slightly further out from the truck?

would like to see how the entire flap looks

thanks