Jump to content

Recommended Posts

Posted
3 hours ago, ManyCamaroz said:

I like the seats in my '21 and prefer the firmness. I drove a Super-Duty about 6k miles on a trip several years ago and it was not comfortable. I ended up buying and using a foam stadium seat to make it somewhat bearable while on that trip. 


Agreed. I prefer the firmer seat to the seats I had in my ‘21 super duty. I would sink in and they wouldn’t provide as much support. This made them more fatiguing and harder to get out of. Just wish the GM seats had better bolstering. They are pretty flat. 

  • Like 1
Posted

We don't drive everyday...only camping trips. Our longest trips are 8 hours and I have no problem with the way I feel after those 8 hours. I do share the drive with my wife so I am not in the driving position the whole time since I can be in the passenger seat with it reclined when not driving. Not sure I would change anything.

  • Like 1
Posted

I've always bought mid trim level trucks (1982 High Sierra K15 the first) & have owned each subsequent version. All were regular cabs. Of all of them, I [b]hated[/b] the seat in my 2017 2500HD. I just never felt comfortable in it. That being said, I do like the seat in my 2024 2500HD crew cab, LT package.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • Today I filled up with 4.899 gallons of fuel at a cost of $4.899 a gallon. $24 bucks. 290 miles. 59.2 mpg. After my 4% COSTCO discount just under eight cents a mile.  
    • Howdy folks,   Recently I pulled a heated steering wheel and clock spring out of a 2015 Sierra All Terrain (part numbers coming soon - will have to disassemble), and just installed it on my 2016 Sierra WT (as base model as it gets).   On install, I noticed that I’m missing the connector often tucked behind the dash for the heating element.     No problem… or so I thought.   I used an “Add-A-Fuse” at my heated steering wheel fuse location, which has voltage, but no wires. I ran it to the positive of the heated steering wheel (Violet/White), and took black to ground.   Hooked up the battery, turned the truck on - no heated steering wheel. No button backlights. Was pleased to see that my cruise control was working though.   Read a post suggesting reversing polarity, so I gave it a shot. Violet and White to ground, Black to power.    Aha! Heat! But I seemingly can’t turn it off AND still no backlights on any of the buttons.    Checked all fuses, everything is still in good order. I’m stumped.   Does anyone have any insight? If so, please share!
    • I'm about 1800 miles into my last oil change, and yesterday a message appeared saying oil life was at 77%. Not sure why it popped up but I think all of these electronics could be susceptible to solar flares or somesuch. I change my oil right at 3K each time, and that was the first time in 10870 miles that message came up. Strange thing is that it showed on the screen at all since I don't drive with that sort of info displayed on the DIC.
    • I’m praying that someone sees this and can help me out… pulled a heated steering wheel and clock spring out of a 2015 Sierra All Terrain, and just installed it on my 2016 Sierra WT (as base model as it gets).   On install, I noticed that I’m missing the connector often tucked behind the dash.     No problem… or so I thought.   I used an “Add-A-Fuse” at my heated steering wheel fuse location, which has voltage, but no wires. I ran it to the positive of the heated steering wheel (Violet/White), and took black to ground.   Hooked up the battery, turned the truck on - no heated steering wheel. No button backlights. Was pleased to see that my cruise control was working though.   Read a post suggesting reversing polarity, so I gave it a shot. Violet and White to ground, Black to power.    Aha! Heat! But can’t turn it off AND still no backlights.   Checked all fuses, everything is still in good order. I’m stumped.   Does anyone have any insight? If so, please share!  
    • Checked the pads today and there's plenty of meat on them. If the message keeps coming up, I'll just answer YES that the pads were replaced and wait for the squeal.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...