Jump to content

Recommended Posts

Posted

Reminds me of my grandfather in-law and his camper purchase. He was a self employed house painter. Many years he drove a large panel van. He promised his wife when he retired they would travel the country with a camper. He bought the top of the line truck and bumper pull camper. Had all the anti sway load leveling eq you could buy. All smiles they left from NJ to visit his daughter in Texas. When he returned home he park the camper at a yogi bear campsite. Sold the truck. That’s where it stayed until he sold it. When I asked. He said I’ll go back to painting houses before I do that again. They would go to the park most weekends. He would sell vegetables out of his garden. That made grandma happy enough.

 

 

Sent from my iPhone using Tapatalk

Posted

I pull a 30ft, 7000 lbs loaded travel trailer with my  2020 Silverado 1500 High Country Crew Cab 5.3 10 speed, 3.23 gears.  No trouble towing through hills or flat terrain.  

 

I use a Recure R3 Weight distribution hitch with sway control. 

 

I suggest deciding on the travel trailer first before deciding on the truck to pull it with. 

Jayco 25RB Hooked up to Silverado .jpg

  • Like 1
Posted

Anyone who thinks their truck can pull right up to the max tow rating doesn't know anything about towing.  First of all, you're going to run out of payload capacity on a half ton long before you ever reach your alleged max tow rating weight.  That max tow rating is the most useless, meaningless and irrelevant number in the towing world.  And it's always accompanied by an asterisk or footnote number that most people don't bother reading.  It's a bragging rights number for manufacturers, and nothing more.  GM bases their max hitch weight on 10 percent of max tow weight.  The 2019 trailering guide has my max tow rating speced out at 12,000 lbs and max hitch weight at 1200 lbs.  But anyone with any towing experience knows that tongue weight is almost always closer to 13 or 14 percent on a travel trailer.  Mine is over 14 percent when the fresh water tank is filled.  So you're either going exceed your max hitch weight or you're going to have to settle for a much lighter load.  A 1200 lb hitch weight limit at 14 percent tongue weight means I can only pull a 8571 lb trailer before exceeding the max hitch weight limit.  And most of you have a  much lower hitch weight limit.  A 960 lb hitch weight limit at 14 percent tongue weight means you can tow up to 6857 lbs.  But most people only look at the so-called max tow rating and ignore payload capacity, hitch weight limit and rear axle weight limit.  And this is the reason a 3/4 ton or one ton truck is more appropriate when you start getting into the 7000 lb  and 8000 lb range when it comes to towing travel trailers.

  • Like 1
Posted (edited)
2 hours ago, AlaskaErik said:

Anyone who thinks their truck can pull right up to the max tow rating doesn't know anything about towing.  First of all, you're going to run out of payload capacity on a half ton long before you ever reach your alleged max tow rating weight.  That max tow rating is the most useless, meaningless and irrelevant number in the towing world.  And it's always accompanied by an asterisk or footnote number that most people don't bother reading.  It's a bragging rights number for manufacturers, and nothing more.  GM bases their max hitch weight on 10 percent of max tow weight.  The 2019 trailering guide has my max tow rating speced out at 12,000 lbs and max hitch weight at 1200 lbs.  But anyone with any towing experience knows that tongue weight is almost always closer to 13 or 14 percent on a travel trailer.  Mine is over 14 percent when the fresh water tank is filled.  So you're either going exceed your max hitch weight or you're going to have to settle for a much lighter load.  A 1200 lb hitch weight limit at 14 percent tongue weight means I can only pull a 8571 lb trailer before exceeding the max hitch weight limit.  And most of you have a  much lower hitch weight limit.  A 960 lb hitch weight limit at 14 percent tongue weight means you can tow up to 6857 lbs.  But most people only look at the so-called max tow rating and ignore payload capacity, hitch weight limit and rear axle weight limit.  And this is the reason a 3/4 ton or one ton truck is more appropriate when you start getting into the 7000 lb  and 8000 lb range when it comes to towing travel trailers.

 

I suspect many people just don't have the mental capacity to understand this issue. I had this discussion on a different forum with a guy who was pulling a 10,000 pound 5w with a halfton and 1200 pounds payload. "So you're telling me that the manufacturer is lying to me". No, the manufacturer doesn't know what trailer you're pulling. You can possibly pull a boat at 10,000 pounds but not a 5th wheel, because there is more than one limit to worry about, and the limit that almost always ocurrs first, is payload.

Edited by the wanderer
Posted
2 hours ago, the wanderer said:

 

I suspect many people just don't have the mental capacity to understand this issue. I had this discussion on a different forum with a guy who was pulling a 10,000 pound 5w with a halfton and 1200 pounds payload. "So you're telling me that the manufacturer is lying to me". No, the manufacturer doesn't know what trailer you're pulling. You can possibly pull a boat at 10,000 pounds but not a 5th wheel, because there is more than one limit to worry about, and the limit that almost always ocurrs first, is payload.

And the pin weight on a 5er is in the 20 to 25 percent range, so he's way over payload capacity before he even puts one thing in the truck itself.  But hey, the factory says I can pull 10,000 lbs.  SMH.

 

Posted

I won't call the max tow a bragging right. Most construction equipment hauler can be dialed to have 10% tongue weight. That being said 10% is really the lowest you want to be at. I think the sweet spot is 12~13%. And I know it might sounds like splitting hair but it is critical.

 

So yeah if you are hauling a skidsteer with one or two guys in the truck you might be able to creap up to your max tow.  Without hitting your max payload

 

 

Travel trailer is a different animal, you are going to bring more gear with and possibly family members and some of these articles can't be stowed in the camper. Ex: bikes, gas cans, tools, wife, and children

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • I like the idea.  I would pick diesel if I had a choice. I need pictures though.
    • I've installed cheap eBay new aftermarket digitizers before.  They work.  Did a bunch of Cadillac CUE (aka Cadillac's MyLink) for someone years ago.  They all worked fine after the repair.    That number 22740886, that is a component part # for GM.  You can use it to search, but its not something that's obtainable at the dealer level.     So pretty much any of these will work - 2015 Colorado Digitizer for sale | eBay
    • Black bumper and the later years Z-71 style color matched grille.
    • You can install tailpipes that direct the exhaust sideways vs the OEM one that goes straight back. There are several on the market, do you own research. HOWEVER, you need to make sure the Venturi vents are still intact, otherwise it will throw a engine code. There is a sensor somewhere that detects back pressure on the exhaust. And if it doesn't collect the correct metrics, it will throw the truck into limp mode. 
    • "Teardown" is complete. Head surfaces are clean and ready, new intake is prepped and ready. Coolant drained and water pump is removed, radiator is removed, new hoses and pump are ready.   The replacement intake is also from a '95 (with I think 260k, the odometer said). Noticeably less pitting where it covers the rear coolant passages. I'm not sure if that's a tribute to more frequent use, more frequent coolant changes/upkeep, or if the intake was machined at some point. But it appears I found a good one.   My coolant hoses were original, and the lower hose still retained the factory spring inside. It's not really rusty, but it's got deposits all over it. Unsure if I should re-install it (will thoroughly clean it first). Someone said hose technology has gotten better since 1995 (has it?) and I don't need the spring. I think modern EPDM is what made those hoses last from 1995-2026, so it's a question of how much suction can the water pump really pull, and will it collapse the hose without a spring?   I'm stopped and waiting for parts, however.   When I first brought the truck home, the fan was intermittently hitting the radiator shroud. I could see someone had monkeyed with the shroud (put a bunch of cardboard as a spacer between the upper/lower shroud halves. Someone said the motor mounts have likely failed and the engine has sagged. I wasn't sure I believed that. The engine is really solid in its mounts: To remove the old intake I *just* nearly permanently welded to the heads with freshly cured RTV and gasket snot two weeks ago, I literally had to use the arms on my lift and a chain with a bolt attached to the intake to pull it loose. It almost picked the front of the truck off the ground before ....scuuuuuuuuuuup.... I could actually hear the gaskets tearing and it broke loose and the whole truck settled back down. Motor barely moved.   SO, those parts I'm waiting on... The lower radiator mounts/bushings had completely failed. The radiator needs to be insulated from the rad support, and the bushings help the rad stand at the correct height. The plastic "baffle" was also destroyed at some point. Someone had attached the shroud to it incorrectly, overlapping a joint that should have been underlapped, creating another suspect issue potentially causing things to hit the fan. Broken tabs, side is busted off, and it's perma-formed/bent where it was jimmied incorrectly.   The baffle? Unobtainum. Long since discontinued from GM, of course. Aftermarket/capa/chinese? Also unobtanium. In GM's infinite wisdom, it appears there are at least two different variations whether the Blazer is 2 or 4 door, and I can't yet tell if they shared the same part with the S-pickups. Plan B, if I can't find a viable used one, will be to create a bracket to re-assemble the critical joint I need to seal a gap with the shroud. But that will bug me, it won't be...perfect.   The water pump bolts appear to have been installed with...plumber's putty. I guess, sure, if it works...? I've found a few "backyard fixes" like that. Someone's been here before....   If I can't find someone to jam bamboo under my fingernails to fill my free time this week I think I'll install the driver's power window motor and replace the rear door speaker that's inop. I've got a genuine GM "9.5" ohm working replacement. Why GM used a non-standard resistance....nevermind. Of course they did, you can get more sound from a cheap factory amp that way.   And the saga goes on...
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...