Has anyone installed heated seats in the back of their crew cab?

[andrewb24]

I just recently installed leather seats in my LT and was curious what I would need to install heated seats on the rear seat?  It would probably only be the seat cushion which would be fairly easy since those were the easiest to put the leather on.  I have storage in the back of the seat which wouldnt work for the back part to be heated most likely anyways.  

 

while taking out the back of the back seat I noticed a plug behind it that had nothing plugged into it and just maybe thats where it would plug in???

[Jim E]

If you can track down the part numbers, you should be able to get all GM parts.

[Daly]

I'm betting even though the connections are there it still won't work. It's likely not connected to the BCM or the controls aren't in the BCM. 

This was a common problem on the last generation of trucks. Often times the connections were there, but the BCM wouldn't support the upgrade or it had to be unlocked or programmed to work. 

Not saying it can't be done, but it's not as simple as buying the parts and plugging them in. 

[andrewb24]

5 hours ago, Daly said:

I'm betting even though the connections are there it still won't work. It's likely not connected to the BCM or the controls aren't in the BCM. 

This was a common problem on the last generation of trucks. Often times the connections were there, but the BCM wouldn't support the upgrade or it had to be unlocked or programmed to work. 

Not saying it can't be done, but it's not as simple as buying the parts and plugging them in. 

hmmm wonder if I could install all the parts and then local dealer could easily program

[Rally6.2RST]

I made a post about this mod.  

This is a cheap mod hardware wise if you have a center console and you see the body harness plug behind your driver rear seat but the BCM programming does not yet exist.  WAMS says rear heated seat programming is pending.

https://www.whiteautoandmedia.com/product/t1-pickup-wams-spec-bcm-programming/

I have all the hardware in place for this mods and will say the chrome trim looks nice to on the center console.

I am waiting on WAMS get enough time to figure out programming.  I encourage you to ask WAMS about programming if your interested.  If there is enough interest they will figure it out.

I think all parts were $250 bucks.  See my post on what is needed.

 

 

[redwngr]

May help with parts search?

 

For 2021 model

 

KA6    Seats, heated second row outboard seats

Standard on crew LTZ, HC, AT4 and Denali 

Available on SLT