Rough Country 3.5” Lift

[Smitdog]

Has anyone installed the Rough Country 3.5” Lift on the 2021 Silverado High Country with ARC? If so what are your thoughts? 

Edited August 9, 2021 by Smitdog

[joe hernandez]

It’s gotten good reviews along with the usual RC hate… I have my kit for my 19 Denali and I’ll be installing it this weekend. Rear on Saturday , front on Sunday .

[tootall4289]

Thinking about the same kit for my 21 Denali.  Let me know what you think about Joe after the install! 

[joe hernandez]

On 8/12/2021 at 7:00 PM, tootall4289 said:

Thinking about the same kit for my 21 Denali.  Let me know what you think about Joe after the install! 

It turned out great! Ride is identical to factory Denali . Lift is perfect height to look aggressive but not over compensating

 

[mdf21]

17 hours ago, joe hernandez said:

It turned out great! Ride is identical to factory Denali . Lift is perfect height to look aggressive but not over compensating

 

Looks great

[Qwerty143]

18 hours ago, joe hernandez said:

It turned out great! Ride is identical to factory Denali . Lift is perfect height to look aggressive but not over compensating

 

Looks impressive!!

[Mike Gil]

Smitdog I can't answer ur question directly but I owe a 2013, I bought used that had some sort of leveling kit on it. I caught the itch to go high so I did. Bought the 7" Superlift suspension lift kit and installed it in my driveway. I'm no mechanic! But as a construction trades welder I had the tools to be confident I could install it and I did. RC price wise is the cheapest brand. That alone scares me just a bit. Ask as many knowledgeable people as you can. Body kits are very easy too. I shop at Amer. Trucks.

Good Luck!

[mdf21]

Got my 3.5” kit installed this week.  As others have said, ride is just like factory and gives me the stance i was wanting 

 

 

 

[CTTMFP]

I installed the 2in leveling kit from Rough country swapped the factory option AT tires for some BFG KO2s. I am happy with height, didnt have to cut anything, no wheel spacers. 

[Slpgmss]

Does this lift still have the truck a little higher in the rear? I got the lift and ordered 2in and 1.5in blocks to use in case the included 2.5 rear blocks were too tall. Thanks. 

[Slpgmss]

On 8/21/2021 at 3:07 AM, joe hernandez said:

It turned out great! Ride is identical to factory Denali . Lift is perfect height to look aggressive but not over compensating

 

 

On 10/1/2021 at 8:16 PM, mdf21 said:

Got my 3.5” kit installed this week.  As others have said, ride is just like factory and gives me the stance i was wanting 

 

 

 

The back is a little higher right?

[jbr1888]

The kit is 3.5 front shock lift and 2 inch block in the rear, so 2 inch rear. Should maintain a small amount of rake. 

[Red007]

On 8/21/2021 at 9:02 PM, mdf21 said:

Looks great

 

On 8/21/2021 at 3:07 AM, joe hernandez said:

It turned out great! Ride is identical to factory Denali . Lift is perfect height to look aggressive but not over compensating

 

Did you have to cut any stock suspension parts to fit the 3.5” RC lift?