Jump to content

Cant find the answer! Chrome Wheels

Skogz16
 Share

Recommended Posts

Skogz16 Enthusiast

Skogz16

Posted
Posted (edited)

Hey all, new here and hoping this forum is helpful now and for the future. 

I have a 2014 Silverado that as of this morning now has 2018 Sierra 20" Chrome wheels and to be clear, despite the picture i provided, these are FACTORY OEM wheels, not aftermarket replacements. I want to take care of the wheels, especially since i live in PA and salt on the roads this time of year is a common occurrence. 

My dilemma is, i cant for the life of me find a straight answer as to what these wheels "are" which will decide what the right polishing products I should use. I am attaching a picture so there is no guess work. 

Are they chrome clad? Are they just straight chrome? Are they PVD Chrome? Are they clear coated (paint)? 

Ive found a lot of topics about wheel cleaning, specifically about Chevrolet wheels but i cant get a grip on these particular wheels. The difference comes down to... do i use a chrome polish, or do i use a polish for paint and a clay bar.... no matter what, i plan on putting a wax on afterward... but i need to know what these are first before i pick a product type. 

Really appreciate any help i can get here. 

IMG_7146[1].JPG

IMG_7143[1].JPG

Edited by Skogz16
shakenfake Senior Enthusiast

shakenfake

Posted
Posted

I believe that they are clear coated over the chrome if I remember correctly but they may just be straight chrome

 

newdude Senior Enthusiast

newdude

Posted
Posted

Two versions of that wheel from GM. 

 

Polished Aluminum which is no chrome just polished and topped with a clearcoat. 

 

The other is Polished Chrome which is what you've got.  They are not clad, they should be chromed aluminum or PVD.

 

I would wash them good, maybe polish them a bit and use a wheel ceramic coating either applicator style or spray style like this:  Graphene Ceramic Spray Coating™ Basic Kit - Adam's Polishes (adamspolishes.com)

 

Don't waste your time with wax.  

 

Avoid cleaners with any of the following:

 

Ammonium Bifluoride (fluoride source for dissolution of chrome)

Hydrofluoric Acid (directly dissolves chrome)

Hydrochloric Acid (directly dissolves chrome)

Sodium Dodecylbenzenesulfonic Acid

Sulfamic Acid

Phosphoric Acid

Hydroxyacetic Acid

  

 

Ideally, since I see a total of two sets of wheels in your picture (the new Denali takeoffs and your originals), why not just run the Denali's in the spring/summer/fall so they won't ever see salt?  

Skogz16 Enthusiast

Skogz16

Posted
  • Author
Posted

Thanks newdude! That narrows it down to just PVD or chrome... has the internet told me correctly that chrome polish is not good for PVD wheels, do you know? Im hoping to narrow it down completely so i can choose the right polish. Once i get that, then I will check out the ceramic sprays, ive heard of them but never used them. Based on your comments, i take it you think they work better, longer?

 

Youre spot on with the original wheels. End game is to have summer and winter wheel/tires. I desperately needed tires for my original wheels, got a good deal on these denali wheels and tires (take-offs, low miles, less than buying new tires for my original wheels) so i scooped them up and threw them on. Next year ill try and get a set of tires on the old wheels but for now, need to protect these as best i can. 

djw88 Enthusiast

djw88

Posted
Posted

the GM Chinese chrome wheels are awful. they don't last in the salt even if you take care of them.  I got rid of my badly pitted chrome 20s for some AT4 wheels. They were so bad they wouldn't hold air. Where the bead seats it was just destroyed.

FB_IMG_1565553644090.thumb.jpg.06f9fbc78367c0546654015aa0fe0fcf.jpg

newdude Senior Enthusiast

newdude

Posted
Posted
22 minutes ago, Skogz16 said:

Thanks newdude! That narrows it down to just PVD or chrome... has the internet told me correctly that chrome polish is not good for PVD wheels, do you know? Im hoping to narrow it down completely so i can choose the right polish. Once i get that, then I will check out the ceramic sprays, ive heard of them but never used them. Based on your comments, i take it you think they work better, longer?

 

Youre spot on with the original wheels. End game is to have summer and winter wheel/tires. I desperately needed tires for my original wheels, got a good deal on these denali wheels and tires (take-offs, low miles, less than buying new tires for my original wheels) so i scooped them up and threw them on. Next year ill try and get a set of tires on the old wheels but for now, need to protect these as best i can. 

 

 

Yea ceramics will hold up for years if applied correctly.  Simple washing with soap and water will remove everything off of them.  

Skogz16 Enthusiast

Skogz16

Posted
  • Author
Posted
14 minutes ago, newdude said:

 

 

Yea ceramics will hold up for years if applied correctly.  Simple washing with soap and water will remove everything off of them.  

Awesome, appreciate the insight..


Now i just need to know whats a safe polish for these wheels.

sk Senior Enthusiast

sk

Posted
Posted

Everything newdude said is right on.

 

Those are actually OEM GM wheels off the Yukon Denali.  I put them on my 2015 Silverado right after I bought it.  I have cared for mine just like newdude says and they still look brand new.

 

Oh yeah -- I am in PA as well.

Skogz16 Enthusiast

Skogz16

Posted
  • Author
Posted

can y

38 minutes ago, sk said:

Everything newdude said is right on.

 

Those are actually OEM GM wheels off the Yukon Denali.  I put them on my 2015 Silverado right after I bought it.  I have cared for mine just like newdude says and they still look brand new.

 

Oh yeah -- I am in PA as well.

can you confirm if they are PVD or straight chrome? 

do you use polish? if so, what kind?

dieselfan1 Senior Enthusiast

dieselfan1

Posted
Posted

Why do you need to polish them? Aren't they new?

As far as the salt in the winter,

You have to keep them clean.

If you keep them clean you dont need polish .

Every time you wash it spray some type of ceramic on them.

I use Meguiars Hybrid Liquid ceramic wax.

You have to do this often or they will corrode. 

I wash my truck 3-4 times a week in the winter.

It works my wheels still look new after 1 1/2 winters in Minnesota 

Screenshot_20220121-072850_Google.thumb.jpg.cf1f7129fe21edd9f53090f1220abad7.jpg

Skogz16 Enthusiast

Skogz16

Posted
  • Author
Posted
On 1/21/2022 at 8:29 AM, dieselfan1 said:

Why do you need to polish them? Aren't they new?

As far as the salt in the winter,

You have to keep them clean.

If you keep them clean you dont need polish .

Every time you wash it spray some type of ceramic on them.

I use Meguiars Hybrid Liquid ceramic wax.

You have to do this often or they will corrode. 

I wash my truck 3-4 times a week in the winter.

It works my wheels still look new after 1 1/2 winters in Minnesota 

Screenshot_20220121-072850_Google.thumb.jpg.cf1f7129fe21edd9f53090f1220abad7.jpg

Thanks for the help. They are new, but not sure what has or hasnt been done to them in the 3-4 years they were sitting in the guys garage. So i just want to put a fresh polish down and then ill put one of these ceramics on them to keep them nice and wash in between. thanks

 

I did get the answer on if they are clear coated or not, the answer is yes they are, for anyone in the future looking for that answer. So dont use chrome polish, just a paint safe polish is recommended for use. 

 

thanks for the help everyone

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • DaleB
      No Software Updates - Old Build

      By DaleB · Posted

      Thanks, all. It sounds like keeping the software "as is" is the best course of action.
    • Grumpy Bear
      The Peckish Synapse

      By Grumpy Bear · Posted

      https://en.wikipedia.org/wiki/Overengineering   Excerpt from the above link: (BTW the above is a 90 second read)   [Quote]   A story about very precise engineering is given in the 1858 story The Deacon's Masterpiece or, the Wonderful "One-hoss Shay": A Logical Story by Oliver Wendell Holmes Sr., which tells of a carriage (one-horse shay) Because it had been engineered so that no single piece failed first – no piece was over-engineered relative to the others, and they thus all collapsed at the same time. A similar quote by Ferdinand Porsche claimed "the perfect race car crosses the finish line in first place and immediately falls into pieces."[5]   [End Quote}   By Engineering's  own definition then; the AFM and Torque Converters, 4-5-6 clutch assembly of the 6L80E, and a dozen other common chronic parts and systems failures are "UNDER ENGINEERED". And by their own definition done so with INTENT. Ya can't have it both ways OEM's.     
    • Spendit
      Installing tow mirrors

      By Spendit · Posted

      Everything you need to know..... https://www.gm-trucks.com/forums/topic/198157-2014-2017-dl8-dl3-towing-mirror-upgrade-–-mirrors-explained/
    • Gangly
      Broke Down on the Mountain

      By Gangly · Posted

      I was in Utah this week attempting a bow hunt in the Wasatch mountains with friends.  On the evening of the first hunt, making my way across a ridge to a friends camp, the upper control arm on the driver's side separated, the CV axle got trashed, and the wheel was dang near at a 45 degree angle to the ground.  I was able to get it towed off the mountain and into town about 3:00 am, and spent the remainder of the night in an O'Reilly's parking lot.  Luckily, there was a Chevrolet dealership not to far away so I was able to get to the dealership and pick up a new CV and UCA.  It would have been a few days before they could have gotten to the truck and I brought tools with me on hunt since it was a two day drive to get there, so I did the repairs myself in the O'Reilly's parking lot.      What's interesting is that the UCA ball joint didn't break, it just popped out of the bottom of the UCA.  There was VERY LITTLE evidence of grease on the ball joint or in the socket, and you could see where the ball joint had warbled out part of the socket over time.  I guess that's what happens over 186K miles of use :)   Big Kudos to O'Reilly's for letting me work on the truck in their parking lot.  However, they made a $150+ off of me from the purchase of various tools, so I guess it was in their best interest anyways :)   Getting towed off the mountain.   UCA Ball Joint Socket   Trashed CV   Suspension disconnected and UCA and CV Removed   New UCA and CV installed with the suspension buttoned up.    
    • KARNUT
      What did you do to your "other" car (aka musclecar) today

      By KARNUT · Posted

      My family still laughs at me when they see me drive up in the minivan. Same with less than a V-8 truck. It helps that I have choices. I don’t think I could only have a minivan as the one and only vehicle as much as I like it. And I wouldn’t pass up a good buy on an older V-8 reg cab GM truck. Could you live Raven as the only ride?

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...