Jump to content

Recommended Posts

Posted

Hey all, been looking at 2500hd/3500hd, but not sure if I want to go Diesel with Few Accessories or Gas with Several Accessories, never owned Diesel. 

 

Currently have a 2014 1500sle with several accessories except leather. Pulling a 34' Rockwood 8329SS travel trailer weighing 7200lbs Dry and 8850 GVWR.  Really like this trailer but who knows the future.

 

Appreciate your thoughts,

Later- 

Posted

I traded in my 2014 1500 5.3 LTZ that was really decked out.   I bought a 2020 2500HD LTZ 6.6 Duramax with all the bells and whistles.   It only had 12k miles on it.   I have a trailer about the size of yours and it pulls it like there is nothing hitched to the truck.   I get about 20mpg when using as my daily driver and about 14mpg when pulling the trailer.  I feel that it's been a great investment and I totally enjoy driving it every time I climb into it.   Wishing you luck on your upgrade!

Posted

I went from a gas 2014 Ram 2500 (5.7L) to a 2021 6.6L gasser. I pull a Keystone Springdale 3030BH with similiar-ish  weight as yours. I am more than pleased with the towing capability of this gas motor. I would estimate we camp 10 weekends a year and none of them are flat tows, mostly within 30-50 miles from home.

 

The first time I towed with my truck last year was 120 miles one way with some good mountain roads, twists, and then more mountain. I was smiling the whole way, I never felt that I needed more power. I was considering diesel as well mostly due to availability at the time but I am more than satisfied with the gas motor and the extra money in my pocket. 

Posted

Thank You Bill, I do feel the 6.6l gas has all the power I need for this TT.L

Later- 

Posted

All about preference, 6.6L gas definitely fits your power needs.  Fuel mileage is not as good in the gas engine but the cost is roughly 50 cents a gallon less also.  For me gas was a no brainer, I wanted to keep the price down a little and I never was one to care at all about the bells and whistles on the inside.

 

I generally buy base and add my personal preferences myself.  Because of this I was able to pay cash for the truck and have no payments.

Posted

Thank You Erick, diesel would be better mpg over gas, but the .40 cents at pump more and Def fluid make the savings about equal.

I sure will miss my 14 1500 gas mpg.

I diffently want to keep price down, but like bucket seats, tilt wheel, cruise, stering wheel controls, back up camera, trailer tow set up, but all else with or without to buy. 

My 14 is paid for, so it is a good down payment.  Later- 

Posted

I have a 2020 2500HD Crew Cab X31 6.6L gas loaded. Just towed my horse trailer and pickup loaded, around 7500 + lbs. a 1000 miles thru the mountains and flat lands. I averaged 10+ mpg and no problems with power or handling at all going up the mountains and keeping up with traffic or faster. Didn’t feel the trailer at all. Good luck with your decision!!!

Posted

Thank You Bill, not bad at all mpg towing, Later- 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • I have a 2015 Silverado and sometimes I can not get in to the truck. I use the key to unlock the driver door. Something is locking the truck when I unlock it, last night I left the truck open and this morning it was locked with the mirrors folded in. This happens while driving so it is now a safety issue. I reach down for the folding button and they open, then they close again.  Any advice, thank you,   Ed
    • Did you ever find a resolution to this? my 2019 Silverado 1500 is showing the exact same headlights issues with the exact same symptoms.  would help a ton if anyone has any advice on this or better yet a known solution..
    • Wawa and Meijer here have ethanol free (88 & 89) I use for my mower and lawn equipment.  Its not much more than reg.  I paid $3.29 a few weeks ago.  
    • tl; dr I've now reached the 6th floor of hell. I'm chronicling my journey for my morning readers.   Pulling the top of the intake apart was moderately easy but it involved a lot of parts, connections, and minutae. I was preparing for the new fuel lines to arrive ("nut and bolt kit" it's called). The fuel line connections are notched and held in place by the manifold and a metal plate with a T27 screw.   It's on the back of the intake, under the firewall, with little clearance, and two hard metal fuel lines in the way. I was using Franken-tools (weird combinations of 1/4 inch ratchet with/without an extension, with a bit holder for my T27) to get in there. One of my sockets and bits fell off and has yet to emerge on the floor. I lost a second setup and that's when I almost started throwing tools. But that was the point at which I had gotten traction on the Torx head, and it promptly stripped. No more traction.   I started humming "1-877-kars-4-kids" because I was about at that point. You know what? I'm $1500 into this thing and I can make it disappear just as quickly. This isn't fun anymore. I had spent a lot of time already "tidying" around the engine bay: Fixing all the "someone's been here before!" BS. The truck has been exclusively dealer- and shop- serviced and I'm reminded of why I never let other people work on my cars unless absolutely necessary.   Speaking of dealer service. This truck has a 1" stack of records going back to 1995. I put them all in an excel spreadsheet, date/mileage/description.   The CPI spider has been replaced 4 times in 85k miles. The EGR? Another 4. Multiple, multiple O2 sensors. One Cat. 4? Sets of plugs and wires, and I swear half the stack is diagnosis paperwork for "misfire, runs rough, extended crank, dies at stoplights".   GM was producing some proper crap back then. And it was still well within the era of brittle/crappy plastic. (Windows 95 was released the same month this truck was sold new, we HAD the technology!!)   There (was) a plastic shroud around the evaporator core and HVAC fan in the engine bay. I noticed a chunk of it missing so I poked at it some more and it literally shattered. Touched it some more and pieces were crumbling off. Had a good laugh. Clearly whatever plastic garbage they were using had broken down over 30 years and was literally turning to dust. That was a good half hour of using a shop vac to remove the rest of it.   Back to it.   I was going to give up for the evening but then decided I'm already level 10 pissed off at the stripped screw: G* D* it, give me my tools back -- and my JOY. We'll do this the hard way: The whole intake is coming off.   Blazer won Round II. After finally finding and accessing the 12 intake bolts and using a pry bar to unseat it from the heads, it popped loose in an explosion of gunk and grime raining down into open ports. Awesome.   6 times I reminded myself: Be careful of the temperature sender on the front of the intake.   YEAH, I forgot again and snapped it clean off in the removal. Add another $20 to the ever-growing list of new parts this thing is consuming.   The shame is, long before removing the intake, I had changed the oil in prep for Tuesday's momentous fuel line replacement that was going to be the magic fix and I'd have a running Blazer to tool around in this next weekend. The intake removal, including raining gunk, also gushed dirty coolant all over the valley. Of course it did. Welp, there goes another $35.   I now need an intake gasket set, bolt set, coolant temp sensor, another 5 quarts of oil, some RTV. Don't worry, I've already got 3 new jugs of Dexcool and a thermostat waiting. I'll fill it with clean water first to get it running, dump it, and then add the Dex later on in case... well, let's not go there. I'm only tearing this down once, next time the truck is going on Marketplace for FREE.   Oh, and I'm going to need vacuum hose for all the stupid connections placed at the rear of the engine which have since disintegrated. Come on, GM....tell me you don't do that anymore?   Oh, and the ears on the distributor where the cap screws down are both cracked. I mean, why not put a new distributor in it too. You get a distributor, YOU get a distributor, Everyone gets a new distributor!   This truck isn't out of the woods yet...I'm already questioning how much more time I'm willing to sink in.
    • NewDude, thank you for the suggestions!    I did follow up and the dealer indicates he has an open CX case and is working with DPAC (Dealer Parts Assistance Center).   Per the dealer, GM has had a quality spill and is not providing an update for when a replacement engine will be available.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...