Jump to content

Music player

hruh7 jooohl
 Share

Recommended Posts

hruh7 jooohl Enthusiast

hruh7 jooohl

Posted
Posted

I'm looking for the best alternative to playing my music collection on my 2020 GMC Denali 1500

I have a classic 160gig ipod. The system recognizes that my ipod is there and my selection shows up on screen, but does not start to play.

I was thinking of purchasing a later gen6 or 7 ipod touch to load my music on then, that would play? or has anyone found different methods?

I'm not a Spotify user or any other. I have a huge music collection that i prefer to load onto a player and play that way.

 

Thank You,

Howard

Rook126 Enthusiast

Rook126

Posted
Posted

I drive the same year and Denali trim you mentioned. I mainly use a Bluetooth connected iPhone for my music but I also have been using a stubby 128gb SanDisk USB drive that is left in the USB port under the center console lid. Formatted in FAT32. Amazon still sells it for $16. SanDisk 128GB Ultra Fit USB 3.1 Flash Drive - SDCZ430-128G-G46

There is also a 256 and 512 but I don't know if they will work. 

 

You can rename your USB drive and that is what will show up on your screen as a music source. I have noticed it spending 30 seconds to a minute indexing all of the files after you first plug it in and power the radio. Music from the drive will play while it is indexing but you just can't navigate to other songs until it is done. Note that the larger drives with more files will likely take more time to index.

 

iTunes already organizes all of my music files into folders named after the artists. I just went to the folder where iTunes stores all of the media and copied every artist folder onto my SanDisk USB. 

 

I haven't experimented with creating playlist so I'm not sure how that is done but the option is available on the touchscreen. Music is sorted by song, artists, genre, album, etc. Play anything you want or just shuffle it all. Song information displays just as it does while play from your phone and the album art displays on the screen if you have that too.

 

IMG_3227.jpg.83a7c89e75a4f3f8e8c7ca82ada6bb51.jpgIMG_3228.jpg.acb1191b820dacea5e0deacf845c448e.jpgIMG_3229.jpg.7ff5a441dcc39c0f738b1bcd555d987d.jpgIMG_3230.jpg.b52419d140e956e9f59a646d6b3aa6f5.jpg Folders.JPG.1afd093e0288da871d5ca81222b08501.JPG

 

cwtech Enthusiast

cwtech

Posted
Posted

I don't know if this is your problem, but what format are your music files?

 

My 2021 with IOR radio will not play WMA files.  ...I had to convert some of my music files to MP3 files.

603Denali Enthusiast

603Denali

Posted
Posted

Howard, I have a ~5 year old Ipod Touch in my 2020 Sierra Denali and overall it works well.  It does have a few annoying quirks once and awhile and I cant tell if its the truck or the Ipod.  There are times it freezes and wont play a song so I simply restart the Ipod and it seems to fix the issue.  Another problem, again intermittent, where I go to start the truck or have remote started, turned on the ignition and it plays 2-3 seconds of a song extremely loud!  It's the weirdest thing, I set the start volume on the truck to zero and it still does it, scares the crap out of me and my passengers.  This was never and issue until the truck updated a few months ago.  Super annoying! 

redwngr Senior Enthusiast

redwngr

Posted
Posted (edited)

How many gigs of music on the ipod? 

 

2020 Infotainment system supports these file formats -  

 

Playing from a USB
A USB mass storage device can be connected to the USB port.
Audio extensions supported by the USB may include:
. FLAC
. MP3
. AAC
. OGG
. 3GP

 

 

I used itunes to convert my cd collection to mp3 for use on a usb flash drive. 

I used a Lexar, similar in physical size to what rook126 posted -- but any usb stick should work. 

One advantage of that physical size is it reduces the change of damage stuff getting caught on it -- and of course not cable to get tangled.

 

 

If you have a huge amount of files and decide to move/convert them, do a small group first to be sure the method is working as intended.

 

 

Edited by redwngr
hruh7 jooohl Enthusiast

hruh7 jooohl

Posted
  • Author
Posted
On 5/4/2022 at 10:15 AM, cwtech said:

I don't know if this is your problem, but what format are your music files?

 

My 2021 with IOR radio will not play WMA files.  ...I had to convert some of my music files to MP3 files.

Most of my files are Mp3's, but they are all on iTunes, so I could convert them. They all played on my 2018 Ford F-150 XLT.

However, now with my Denali, they don't play at all. I'm thinking the iPod I have, 2nd gen, is just too old.

Thank You

hruh7 jooohl Enthusiast

hruh7 jooohl

Posted
  • Author
Posted
On 5/4/2022 at 10:32 AM, 603Denali said:

Howard, I have a ~5 year old Ipod Touch in my 2020 Sierra Denali and overall it works well.  It does have a few annoying quirks once and awhile and I cant tell if its the truck or the Ipod.  There are times it freezes and wont play a song so I simply restart the Ipod and it seems to fix the issue.  Another problem, again intermittent, where I go to start the truck or have remote started, turned on the ignition and it plays 2-3 seconds of a song extremely loud!  It's the weirdest thing, I set the start volume on the truck to zero and it still does it, scares the crap out of me and my passengers.  This was never and issue until the truck updated a few months ago.  Super annoying! 

Wow, I can imagine their, and your surprise! ha. I have found my 2020 Denali is good at keeping the start volume. My issue is my old iPod. It's a first or 2nd gen. I think I'll break down and purchase a 6th or 7th gen ipod touch.

Another responder on this page suggested a micro flash drive. Excellent idea, but again my truck did not have his option, which was a flash drive slot on the front console up from the C-drive slot and USB. Nice. My truck does have a flash drive slot, but inserted in the slot in a navigation drive that needs to stay. {i think}.

Thanks for the response.

hruh7 jooohl Enthusiast

hruh7 jooohl

Posted
  • Author
Posted
On 5/3/2022 at 8:54 PM, Rook126 said:

I drive the same year and Denali trim you mentioned. I mainly use a Bluetooth connected iPhone for my music but I also have been using a stubby 128gb SanDisk USB drive that is left in the USB port under the center console lid. Formatted in FAT32. Amazon still sells it for $16. SanDisk 128GB Ultra Fit USB 3.1 Flash Drive - SDCZ430-128G-G46

There is also a 256 and 512 but I don't know if they will work. 

 

You can rename your USB drive and that is what will show up on your screen as a music source. I have noticed it spending 30 seconds to a minute indexing all of the files after you first plug it in and power the radio. Music from the drive will play while it is indexing but you just can't navigate to other songs until it is done. Note that the larger drives with more files will likely take more time to index.

 

iTunes already organizes all of my music files into folders named after the artists. I just went to the folder where iTunes stores all of the media and copied every artist folder onto my SanDisk USB. 

 

I haven't experimented with creating playlist so I'm not sure how that is done but the option is available on the touchscreen. Music is sorted by song, artists, genre, album, etc. Play anything you want or just shuffle it all. Song information displays just as it does while play from your phone and the album art displays on the screen if you have that too.

 

IMG_3227.jpg.83a7c89e75a4f3f8e8c7ca82ada6bb51.jpgIMG_3228.jpg.acb1191b820dacea5e0deacf845c448e.jpgIMG_3229.jpg.7ff5a441dcc39c0f738b1bcd555d987d.jpgIMG_3230.jpg.b52419d140e956e9f59a646d6b3aa6f5.jpg Folders.JPG.1afd093e0288da871d5ca81222b08501.JPG

 

 

hruh7 jooohl Enthusiast

hruh7 jooohl

Posted
  • Author
Posted

Thanks for your response. I checked to look at my console. It is different. That seems odd, given they are the same model. My console has the C-drive slot for charging phones/devices...etc and a USB, but that's it on the center console. However, in the middle console opening the center glove compartment I have an AUX insert 3/8 jack and a USB, also a flash drive slot. Currently in the slot is a factory drive with navigation info on it. I have not read on that yet, but think it might be necessary to stay put to receive and store all navigation changes, updates, etc...

So that being said, it does have a drive I could use, but is taken with this NAV drive.

Looks, like I might go ahead and upgrade to an iPod touch late gen.

 

Thanks for the reply,

Howard

KARNUT Senior Enthusiast

KARNUT

Posted
Posted

I’m an older guy. All my albums, cassettes, CDs are on mp3s then to iPods. All out dated and  in a closet. Seven thousand songs total. I like things simple. Pandora, prime, IHeartRadio on my iPhone. I hit a button on my iPhone or steering wheel say an artist or album and play that  and equivalent music. Couldn’t be easier.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,947
    Total Members
    8,960
    Most Online
    Sothpaw27
    Newest Member
    Sothpaw27
    Joined

  • Who's Online   1 Member, 0 Anonymous, 443 Guests (See full list)

  • Latest Articles

  • Posts

    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      www.enginelabs.com/news/what-i-learned-today-bearing-clearances-vs-oil-viscosities/     www.enginelabs.com/news/oil-viscosity-can-the-numbers-be-misleading/ The Big Lie… Coming full circle to the reason Lake discusses the Porsche engines in particular. Based on the 2000 samples in the SPEEDiagnostix database, increasing the oil viscosity in these engines, even those run on the track, showed no significant difference in results.   The smoking gun was in the oil chemistry. That is where the data shows higher instances of more wear. Molybdenum was the key; the higher the amount, the less the wear. Speed postulates that higher viscosity oils have more thickeners to artificially inflate their viscosity numbers. These thickeners lose viscosity under shear, and the result is that not all oils of the same viscosity have the same shear stability.   Having enough viscosity is the most important characteristic, but according to Speed, once that required viscosity level is reached, additive chemistry matters more than additional viscosity. Speed also states, oil pressure problems on the racetrack aren’t a viscosity problem; it’s an oiling system problem. Running a thicker oil is just a band-aid for an underlying oiling system problem.
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      Can it still be Assembled II?   Viscosity on the decline by various means. Heat on the rise making that worse. Engine RPM in the tank. Smaller motors with more boost trying to emulate an electric motor. Full torque, zero rpm. Then we will triple the OCI. Argh.    But wait....there is more. LSPI has pushed a shift from Ca to Mg and as that cost more PLUS the run to lower sulfur compounds the TBN is moving in the wrong direction for the increased OCI's demanded.    That not being enough to placate a demand for a parameter they can't measure the other sulfur bearing compounds are also under attack. That would be zinc and phosphorus sulfonate compounds. To some degree those are being replaced with boron esters and others, i.e. titanium ect. All of which have shorter service lives. And there there is the "Secrete Sauce" marketing for AW adds that 'Can't be detected by UOA's" but trust me because I (the blenders) never ever lie.    Spoiler alert; ALL additives are sacrificial! Smaller amounts of the old blended with less robust versions of the new do not equal longer service lives. So what are the blenders recommending? Wait for it.......   MOVING THE GOAL POSTS! OMG      Let's declare the long standing TAN/TBN crossover irrelevant and tell people that soot is a great 'graphite' based lubricant which can aid tribo films. Wait, what? Let's declare that the standards used for oxidation and nitration were to conservative and can be expanded. Let's tell them that because GDI fuel dilution, although being a VISCOSITY KILLER and an acid generator is actually okay because we have better base oils that limit viscosity failure limits. (Said knowing this is measured in fractions of a centipoise and in bases not commonly used in shelf oils)   Lying from the heart is not just the new normal but we have a public, a very young public, that is so ignorant of the facts and so sure of their "RESEARCH" into AI driven models base in regurgitated  instead of scientific research based unvarnished, peer reviewed FACTS that the incoming guard is loosing their grip on reality and the OEM's are tickled pink while the blends bend the knee.    You have an ever limited set of tools to work with. And sooner or later those will be taken from you as the API and the EPA strangle the last remaining fluids from the system. What you have left is your wits. If you care to use them.    At some point in the very near future it will not longer be possible to do "What is best for the machine", and be replaced with "The best you have access too". You WILL be rewarded with half the life and twice the cost. That isn't that hard to predict.         
    • Chuck FB
      Software Update

      By Chuck FB · Posted

      I trust you saw the other comment where he knew what he was talking about !. Yes, these darned newer vehicles with all their so smart they are stupid technology, goes and drains the battery down. As you might see my other comment, I installed a Noco 5 battery tender under the hood and at this point still have the cord routed so I have to lift the hood and then plug it in but am typically parked in a garage or a shed so its not risking the engine hood in the wind. That way I am assured or hopefully so of not finding I have a battery drawn down and can't even start the truck and that also damages the battery to draw it down too far. 
    • Chuck FB
      Software Update

      By Chuck FB · Posted

      I guess no surprise my guesses were wrong !, at least now I know if I ever happen to see it grayed out in my own truck as to what is going on.    I never happened to catch my truck with it grayed out, it seemed every time I would test to see if there was an update it never found anything and yet more than once I would check to see if there was an update and there was nothing, then a day later or even that same morning I would drive to town and after more than one engine shut down in town as I did my errands it would pop up that there is an update now ready to install and the only place I have a connection to the internet is at home by wifi so its not as if it grabbed the download while driving. I don't trust these new vehicles due to all the crap they can decide to do while sitting for some days not running and run the battery down so most of the time if I know the truck will sit for a few days I plug in the battery tender I have mounted under the hood and so the only time the truck must have downloaded software was when it was sitting in the garage where the signal is awful but I have that tender plugged in and somehow it managed to download it. I honestly detest all this crap, way to easy to leave a person stranded.    Since I don't trust any of it I don't do the install of the already downloaded software until I get home and sometimes have even sat in the truck to watch what its doing as its going through the process to its conclusion as its not like it is set up that it will tell you the next time you fire up the engine that the update that was initialed actually installed or installed properly. Yes I can go into the updates and see the list. After I go through the install where I feel its safe to do so in case it breaks down as a result, I will plug in the battery tender after the fact to recharge as I don't know how much power its taking just to do the install and that can take a while for it to install. 
    • nfisherman
      Software Update

      By nfisherman · Posted

      Thanks for the reply. All settings were correct and the engine was off, as it was supposed to be. It turned out to be something simple. I took a drive for about an hour. I must have had a low battery without knowing it. The voltage gauge on the display looked ok. At the end of my drive, I shut off the engine and the update prompt came up and it updated normally. It’s ironic because one of the features of the update is a reduction of battery drain. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...