Jump to content

Recommended Posts

Posted

I know there are similar questions asked all over this forum but I'm having a having a hard time putting all the pieces together.  Sorry in advance if this is classed as a duplicate - feel free to point me to an existing thread if appropriate.

 

I have a 2020 Silverado Custom with the center jump seat.  Currently, it has the "no storage" seat but I've ordered a replacement and will be adding storage.  Ultimately, I'd like to install this wireless charger in my truck:

https://boostautoparts.com/products/2019-newer-gm-charging?rq=th_chevy~yr_2020~mk_silverado&variant=42070253600927

 

In order to do this, I need a 12v outlet in the jump seat which mine does not have.  While I'm doing it, I'd also like to get the rear USB's added next to the rear vents so the kids have a place to charge their devices.  It would be nice to have data in the USB ports but it's fine if it would be power only. 

 

My big question is how do I get power to the jump seat?  The custom does not have the harness that runs under the seat - I believe this is GM part #84671378 but I'm not 100% sure.  If this is the right part where does it connect (does it plug under the dash or is it wired in directly somewhere)?

 

Thanks in advance,

 

Ian

Posted

You don’t have to have the 12v outlet to get power to the jump seat console. 

 

My 2022 refresh Sierra doesn’t have the 12v outlet, but I was able to tap into the fuse box and run power to the console to get a Boost wireless charger to work. You should be able to do something similar with a 2020 model. My work truck is a 2019 Silverado, and I’m sure this approach would also work there - just need to determine which fuse and ground point.

 

This won’t get USB ports in the back, but it’s half your goal.

 

 

Posted

This is a great - thanks!  I did talk to the parts desk at the local dealership and he gave me a schematic printout for an LT with the center console wiring. I'm *hoping* it's just a matter of replacing the type of wiring harness used that provides the additional vehicle options. What I don't know is if I will be able to connect it at the dash.  I did order one online just to see - if I can't get it to work I'll probably just do what you did.

Posted

Could you post the schematic on here? Also the part # for the harness you ordered? Several of us are having the same problem.

 

Thank you.

Posted

I ordered the following GM parts:

 

84482761 - wiring harness

25774623 - 12v accessory plug

84166962 - plug cover

 

I also ordered the Boost wireless charger for my vehicle (2020 Silverado Custom with jump seat).

 

The GM parts are due to arrive tomorrow (5/16) and I already have the charger.  I'm guessing the wiring harness won't work at this point but I have a plan that I'm going with if thats the case.   Please keep in mind this is all from a wiring rookie - so feel free to correct me.

 

Following the idea above about hardwiring the charger, I think I'm going to end up adding a new 12v accessory plug in the rear console (by the heater vents) using an add-a-circuit.  There is an existing 15 amp circuit (F34 on the passenger side for my truck) that is used for the cargo lamp.  It seems like a safe/non-essential one to use for adding a circuit.  Then run wires down the sill, come out by the heating vent and into the jump seat.  Once I have the accessory plug in I can just follow the Boost install to put in the charger.  This will also allow my to use one of the USB plugs in the accessory sockets for the kids to charge stuff.

 

Only thing I'm not sure about is the boost charger looks like it's expecting a blue wire as well as a live and ground.  I *think* this is the accessory plug lighting but not 100% sure.  If thats the case, I'll have to leave that unpowered.

 

schematic.pdf

Posted (edited)

Ok I bailed on this....so many things I got wrong :).  F34 is not switched so don't use it.  Also, I had general concerns about actually hooking up the 12v accessory and charger on the same circuit without starting a fire.  I think I'm going to follow Brian's instructions for the charger here:

 

 

 

And (eventually) run a second circuit for the 12v outlet.

Edited by Ian Fox
Posted (edited)

So I've run into a snag.  It looks like I don't have the additional ground point in my truck.

 

I'm not sure what the two bolts are on the top left and if they are supposed to be additional ground points. I can't get a reading with them on my meter.  I'm not sure if its just paint that needs removing.

 

Any ideas?

IMG_1410 copy.jpg

Edited by Ian Fox
  • 2 weeks later...
Posted

Good to hear you got it! I will be installing the Boost Auto wireless charging into my full center console next week when i finally get it. ( I have been trying to get this console for 3 months).

  • 1 year later...
Posted
On 5/22/2022 at 3:15 PM, Ian Fox said:

Nevermind - I got it.  Wireless charging is installed.  Thanks everyone for the help.

Did you ever do anything with the harness? If so, how did it connect up in the front?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • My brother has a 2007 Avalanche with afm 5.3. It`s got 176,000 miles. Runs like a clock. Never been apart. Co worker has a 2010 Tahoe with afm 5.3. 230,000 miles. Never been apart. Runs like a clock. So, even though cyl deac is a weak spot, they can go the distance.   BUT, these engines had the oil changed regularly, AND had 5w30 as spec. I wonder if they would have lasted this far on 0w20? I`ll bet not.
    • I certainly could be wrong but I hear of pickups far newer than that 2007 cutoff which may not be going to the wrecker but are having engine work done and be that a reman engine or new engine or trying to repair the existing engine. Some of it would be design issues as per the cylinder deactivation system that GM has and one of those lifters wiping out the cam and the question of oil changes moving the needle or not on that whole mess, or in the case of Ford pickup engines that have the long timing chains and wearing them out and the roller followers and phasers and some of that certainly goes back to oil change intervals. But in those various cases the truck has all sorts of life left in it and so the unfortunate owner and may be original owner or used market owner that is pouring money into repairs so the truck is not seeing the salvage yard yet but damage is happening by infrequent oil changes. A friends son had bought a 2018 I think it is half ton GM and it had some sort of extended or used dealer warranty on it and of course the lifter issue bites and its rattling and so the dealer had to swallow the bill and was at least 7000.00 and I think they only replaced what they felt they had to replace so yeah, I can see that being a ticking time bomb in the not too distant future. Would frequent oil changes cure all these engineering "marvels", probably not but some engine designs have shown that they do much better if the oil is changed a lot more often then if the manufacturer service claims are followed. New trucks cost so much that there is an incentive to keep the existing truck on the road by repairing. 
    • get a good code reader, and find out what problems the truck has noticed by reading codes. cheap ones can only get basic engine codes, you may want to get one that can get codes from all the computers in your truck.
    • This is sort of my point, salvage yards aren't overflowing with all these 'poorly' maintained trucks - excellent/good/servicable condition otherwise, salvaged only as a result of a bad engine from poor oil change regiment.    In my area, there are no 2007 to newer gm trucks/suvs in any salvage yards. A few are in the 'recyclers' with very obvious reasons for being there - wrecked.
    • Stabilitrack was a stability control, traction control system, that functioned independently from the transfer case.   Z-71 has nothing to do with the transfer case or differential.   If it does have an AWD system, my memory recalls this being specific to the Denali trim, converting won't be as simple as swapping out mechanical parts like differentials and transfer cases. It will require reprogramming at a minimum. Long story short, not likely worth it.   Pulling a fuse, may disable the AWD system, it might also prevent any other transfer case functions.   However, the AWD case was generally based on the same transfer case you refer to in the 2006 Suburban. If it still has a 4-High and 4-Low where the transfer case locks and splits power 50-50 front to rear, what are you gaining by changing anything? A true-rear wheel drive only, what good will that serve? Not enough to go through the trouble of changing out all the parts.    Generally, all the factory systems will handle a 33" tire and re-gearing. Probably a 35" tire too, if you aren't driving like a caveman. If 35" tires are in the plan...   If you do plan on driving like a caveman or are fully committed to 35" tires, an entire re-think of the build is probably in order. Starting with square one, an IFS front end isn't going to be the best starting point for 35's and caveman driving. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...