Jump to content

Hard Shifting/"Thunk" from behind?

Offspring22
 Share

Recommended Posts

Offspring22 Enthusiast

Offspring22

Posted
Posted

So I have a 2017 Sierra 1500, with the 6.2L and 8spd transmission.  For the last couple of years, I've had an issue where there are hard shifts (mostly 1st to 2nd) or occasionally while towing on the highway as well.  More chronic is when I'm driving, usually the first 2 or 3 stops in the morning I feel like I'm getting bumped from behind.  A thunk with the truck being knocked forward.  That part has been getting worse where it's not just the first 2 or 3, but more sporadic now as well.  

I've brought it in a couple times and been told that they don't notice the issue, or hooked it up to something and everything is "within spec".  They did change the tranny valve body or something a while back as well, but no fix, and getting worse.

Anyone had something similar?  Any fixes advice?  Warranty is up in Sept so would love to get it solved before then.  I got it going in for an oil change on Monday, so bringing it up with them again.

Thanks!

JimCost2014 Senior Enthusiast

JimCost2014

Posted
Posted (edited)

TSB Bulletin #18-NA-355

 

With this: Blue Label. 

 

Mobil 1 Full Synthetic LV Automatic Transmission Fluid HP, 1 Qt.

 F12-t-fluid-2.jpg

Edited by JimCost2014
  • 2 weeks later...
Offspring22 Enthusiast

Offspring22

Posted
  • Author
Posted

So just to follow up, I brought my truck in for a oil change and again brought up the issue.  They agreed there was an issue this time, and I dropped it off on tuesday.  Got it back today, and they said they tore into the transmission and replaced the "backing plate retaining rings" as well as the valve body again.  Also used "Dextron HP ATF Mobil Synth fluid"  So we'll see if it fixed anything....

  • 1 month later...
Offspring22 Enthusiast

Offspring22

Posted
  • Author
Posted

May as well update again.  The last service didn't fix anything, so I went back in and spoke with the service manager who said he'd take a look at it personally.  Long story short, they're ordering me a new transmission under "customer satisfaction", but it's back ordered and who knows how long that may take. 

Hopefully it fixes it....

  • 1 month later...
2017gmcsierraslt Enthusiast

2017gmcsierraslt

Posted
Posted

Hi, I also have the 6.2L and the 8l90 with max tow.

My tranny has clunked from the day it arrived from factory special order.

Wondering if you got the new transmission and if you are happy with it or if it's doing the same thing.

GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
On 8/25/2022 at 3:47 PM, 2017gmcsierraslt said:

Hi, I also have the 6.2L and the 8l90 with max tow.

My tranny has clunked from the day it arrived from factory special order.

Wondering if you got the new transmission and if you are happy with it or if it's doing the same thing.

This is certainly not what we like to hear, 2017gmcsierraslt.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2017 GMC Sierra. To do so, please send an email to [email protected] with ATTN: 2017gmcsierraslt/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s privacy policy, please visit https://www.gm.com/privacy-statement.html.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • dna9656
      New to Me 2010 SLE (Quirks, Issues)

      By dna9656 · Posted

      Your tire pressure issue may just be batteries, you can reset them using tge Ing switch (I think) and the owner's  manual. ChatGTP will b e a faster, better help than Google.
    • Another JR
      Towing In Loose Gravel

      By Another JR · Posted

      The thinking is that starting out in a higher gear makes it easier to avoid applying excessive torque when pressing the gas pedal. In a modern 4wd truck with 4 low and a limited slip or locking rear end, I would use 4 low and try to crawl up the ramp. Sometimes if they are too slippery, you have to back up to let the boat have some bouyancy, and then accelerate briskly to get some momentum to help you pull the through the slippery parts. 
    • XY74
      Roll up bed cover experiences

      By XY74 · Posted

      I have a Retrax pro that I first had on my 2020 chevy and transferred it to my current GMC.  It stays in the garage most of the time, so hard for me to judge it's long term weather resistance.  It still works perfectly, been very durable.  It doesn't see oil patch usage, but it's not a mall queen.  It keeps most things mostly dry (small leaks) and the security of it is enough to slow someone down but not keep them out for long.  I would buy one again, it works for me.     
    • fm2176
      New to Me 2010 SLE (Quirks, Issues)

      By fm2176 · Posted

      Thanks to the convenience of Amazon, I was able to get a few things done to the truck today.  I installed Carquest Premium oil and air filters with five quarts of Mobil1 High Mileage 10-30 along with a quart of Pennzoil Platinum 5w-30 I already had.  The latch for the flip up center console lid was broken so I replaced it along with the power mirror switch.  I found my push retainer assortment this morning and reattached the plastic under the bumper and it was only held on with a few screws and retainers.  Then I programmed a new remote keyless entry fob so I can lock my dog in the truck when I take her out with me (I've got to keep the air going for her since it's been in the 100s).  Finally, I ordered some LED interior bulbs and replaced the reading lamps.  The front lights are working fine while one of the back lights only works intermittently and the other not at all.   While under the truck, I found the source of at least one of the noises: the sway bar links need replacing.  I ordered a set of Suspension Dudes links with Code Red bushings.  Never heard of them, but they're made in the USA and have decent reviews.  While making yet another Amazon order, I went ahead and added a set of front tow hooks.  I went with red, since that's the color of the sway bar link and bushings and it should look decent enough on a black and chrome truck.  Speaking of which, it doesn't bug me much, but the passenger side mirror has a chrome cap while the driver side doesn't, so eventually I'll make them match one way or another.  Oh, and I ordered a $20 TPMS reset tool.  No idea if it will do anything for my sensors but it was cheap and will work for the Ford Transit Connect as well.     For tradition's sake, I ordered a new oil change wrench.  I kept the Snap-On 9/16"x15mm GM wrench I bought when I was 18 in the 2006 GMC from the time I bought that truck until the truck was lost.  While I was tempted, there's no need to spend $80 for a new SO wrench, or even $50 with shipping for a used one on Ebay.  I just bought a Duratech 15mm extra-long ratcheting wrench to do the job as needed.  It works, and if I like that wrench enough, I'll buy the set.  
    • Another JR
      Multigate electrical problem

      By Another JR · Posted

      The recall is for exactly this issue - those drain holes combined with the limited environmental capability of the tailgate electronics card inside the tailgate were a problem. The “safety issue” was the potential for the tailgate to spontaneously open, but all kinds of tailgate misbehavior can occur from water contamination of that control card.    There is no real fix yet. The initial recall just disabled the tailgate. Later, when parts became available, they would replace bad parts with new parts of the same bad design. My dealer is going nuts because the few times I let them get their hands on my truck, my tailgate is off due to a slide-in camper installation. They really want to cut my tailgate wires, but I won’t give them the chance. I will let them get their dirty hands on it when a real fix (redesign) is available.  My tailgate, which works just fine with sealant plugging the drain holes, will remain safe in a dry storage crate until then.  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...