Jump to content

Recommended Posts

Posted

I noticed my ‘22 2500HD has a hesitation in the engine when you’re accelerating.  When you pull to pass a vehicle and you’re not on it hard but giving more gas and holding steady you can feel a slight hesitation in the engine.

 

I had it in to get the front shock recall done so I asked them to look into it.  Dealer came back and said the tech noted what I was talking about but that was normal for the gas engine in these big trucks?  I find that hard to believe.  Anyone else notice this with theirs?

Posted

I would guess if it’s not enough demand to issue a downshift, the shudder you’re feeling is the torque converter.  Lots to read on GMs torque converters.

 

Posted

I bet a pedal commander would make it "feel" a lot better. That's the first mod I did to mine, and it feels 100x better now in sport mode +2 or+3. 

  • Thanks 1
Posted
On 9/16/2022 at 1:15 AM, Kjduvall said:

I bet a pedal commander would make it "feel" a lot better. That's the first mod I did to mine, and it feels 100x better now in sport mode +2 or+3. 

It’s not a pedal response issue, I’m holding the pedal steady and you can feel a hesitation in the engine or at least that’s what it feels like.  Very slight but there.  

Posted

Try not mashing the pedal to the floor, just part way down for quick acceleration. Then push further down as your speed increases. That seems to work better for me when I get on it. I imagine it has to with the torque sensing and adjustable timing on this engine.

Posted
On 9/15/2022 at 2:51 PM, Harv3589 said:

I noticed my ‘22 2500HD has a hesitation in the engine when you’re accelerating.  When you pull to pass a vehicle and you’re not on it hard but giving more gas and holding steady you can feel a slight hesitation in the engine.

 

I had it in to get the front shock recall done so I asked them to look into it.  Dealer came back and said the tech noted what I was talking about but that was normal for the gas engine in these big trucks?  I find that hard to believe.  Anyone else notice this with theirs?

This is certainly not what we like to hear, Harv3589.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2022 2500HD. To do so, please send an email to [email protected] with ATTN: Harv3589/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s privacy policy, please visit https://www.gm.com/privacy-statement.html.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

  • Like 1
Posted
On 9/23/2022 at 10:31 AM, GMCustomerService said:

This is certainly not what we like to hear, Harv3589.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2022 2500HD. To do so, please send an email to [email protected] with ATTN: Harv3589/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s privacy policy, please visit https://www.gm.com/privacy-statement.html.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

Thanks for the reply but I’m in Canada and GM up here doesn’t work that hard towards customer service.   Don’t think you can help me out unfortunately 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Folks, Have a great new 2026 WT  (std cab, 2.7/4WD) w/base 40/20/40 mech adj bench "fake buckets"  (with lower and upper center console) heavy vinyl seats.  Overall the seats are very comfortable and the vinyl is heavy and appears less likely to 'split out'. Am very tall (6'5")  + a bad back/osteporosis/former hyperparathyroidism so ease/range of movement is a bit restricted.  The truck rides a bit high and I use a nerf step bar w/my left foot to step in, then I put right foot/leg in, drag my butt in  & get seated.  Worked fine in my 2018 RAM quadCab. But I end up dragging my butt over the left raised sidecushsion area of vinyl seat, and due to texture there's fair amount of traction on slide inward.  (ArmorAll didn't improve.) If the seat were even ~1/2" - 3/4" lower it'd be helpful, but base seats just have the forward/backward underseat bail and the side lever for tilt which really doesn't affect seat height.   I really don't want to 'de-puff' the left side sidecushion forming the  fake 'bucket'. I know one company sells 'seat elevator blocks':  but is there a simple way of lowering the height of the driver seat instead?   Thanks Bill W San Jose  
    • I have a basic 2026 1500 WT  (2.7L/4WD reg cab shorttbed). Comfy, generally happy with electronics/radio - but is there a way I can add switches to steering wheel right-side position (curr. empty) so I can adjust volume, push phone button to voice dial, etc? Bill W San Jose  
    • The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...