Conejabelica Posted February 15, 2023 Posted February 15, 2023 (edited) So Rpm’s started going crazy we had it parked for a couple days . Today we tried get it into gm but didn’t make it. You can drive it at a certain rpm but then it will go crazy and like just not go. Can’t be put into reverse when this happens. if you turn off the car and turn it back on it will run but then same thing happens. 2017 gmc sierra single cab . 5.3L 2x4 Edited February 17, 2023 by Conejabelica
JimCost2014 Posted February 15, 2023 Posted February 15, 2023 Any information about the truck at all would be very helpful, otherwise all you will get are guesses and sarcastic comments. 1
asilverblazer Posted February 17, 2023 Posted February 17, 2023 While you are gathering pertinent information, check engine light ought to be on, so get a code reader and see what codes come up.
Conejabelica Posted February 17, 2023 Author Posted February 17, 2023 20 minutes ago, asilverblazer said: While you are gathering pertinent information, check engine light ought to be on, so get a code reader and see what codes come up. No codes on reader. We’ve already done that. No check engine light either
asilverblazer Posted February 17, 2023 Posted February 17, 2023 (edited) Does the check engine light function at initial start up? On 2/14/2023 at 6:05 PM, Conejabelica said: Can’t be put into reverse when this happens. What does this mean? The gear selector cannot be put in the reverse position? If put in the reverse position what does the gear indicator do? Does the lever go into reverse and the indicator indicate reverse but nothing happens? So far I'd expect a torque converter and transmission rebuild is in order. Does the truck otherwise start and run fine? Mileage on the odometer? Any grinding or other odd noises? Edited February 17, 2023 by asilverblazer
Conejabelica Posted February 18, 2023 Author Posted February 18, 2023 5 hours ago, asilverblazer said: Does the check engine light function at initial start up? What does this mean? The gear selector cannot be put in the reverse position? If put in the reverse position what does the gear indicator do? Does the lever go into reverse and the indicator indicate reverse but nothing happens? So far I'd expect a torque converter and transmission rebuild is in order. Does the truck otherwise start and run fine? Mileage on the odometer? Any grinding or other odd noises? Correct it will be in the reverse gear . But does not move. weird part is if you turn off the truck and turn it back on you can go in reverse. the truck runs good . No issues with it till now . It has like 990000 its never had any odd noises. It was running good then like one day it just decided to start shifting weirdly. And now this
asilverblazer Posted February 20, 2023 Posted February 20, 2023 The only thing left that might be 'simple' is check all electrical connections to the transmission. If it is not a mechanical failure that requires rebuild it is an electrical issue that a more sophisticated diagnostic tool should uncover. In any case, I would expect a significant number of dash warnings... in other words, if you don't see anything external, its going to need to go to a shop.
newdude Posted February 20, 2023 Posted February 20, 2023 On 2/17/2023 at 7:55 PM, Conejabelica said: Correct it will be in the reverse gear . But does not move. weird part is if you turn off the truck and turn it back on you can go in reverse. the truck runs good . No issues with it till now . It has like 990000 its never had any odd noises. It was running good then like one day it just decided to start shifting weirdly. And now this After you turn it off and turn it on and reverse works, does reverse cut back out again after you start moving?
Conejabelica Posted February 20, 2023 Author Posted February 20, 2023 3 minutes ago, newdude said: After you turn it off and turn it on and reverse works, does reverse cut back out again after you start moving? Yes
newdude Posted February 20, 2023 Posted February 20, 2023 57 minutes ago, Conejabelica said: Yes Transmission is highly likely. We got a 2018 right now doing that. Converter was smoked which sent debris everywhere and smoked the pump. It also smoked the 4-5-6 clutch pack and chipped some hard parts somehow. Curretly getting rebuilt. Time to have the transmission pulled and gone through.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now