Jump to content

Recommended Posts

Posted
On 4/30/2023 at 6:24 PM, Pryme said:

Different strokes for different folks but I prefer the previous typed out Chevrolet grill to this one shown. Was more unique and in your face. 

i prefer the 20-23 grill on upper trims for sure.....not a fan of new LTZ/ HC front end, however if your getting an LT and wanting a LED upgrade thats 4k just get an LTZ....sure its still few k more but you also get more than just the headlights....better value imo

  • Like 1
Posted
9 hours ago, Dunn said:

i prefer the 20-23 grill on upper trims for sure.....not a fan of new LTZ/ HC front end, however if your getting an LT and wanting a LED upgrade thats 4k just get an LTZ....sure its still few k more but you also get more than just the headlights....better value imo

Mines just a low end WT but I like the utilitarian look of the all black front grill, bumper and hood scope as it contrasts with the white paint.  I would like led lighting for the fact it’s much brighter though but eventually I’ll toss in some or as time goes on the whole assembly may be easy to find in a salvage yard or something 

Posted
1 hour ago, 64BAwagon said:

I put the Lasfit H11's in my LT and its an entirely different experience when driving at night. For less than $100 its a complete transformation. https://www.lasfit.com/products/lcplus-h11-h9-h8-led-headlight-bulb?rq=na_led-bulbs~mk_chevrolet~md_silverado-3500~yr_2023~zq_lt~dz_low-forward-lighting

 

(same lamp for high and low)

I did the same upgrade with vleds H11's. Waaay better night driving than my oem led's on my previous 2021 GMC.

Posted

did same with 2 LTs....was night and day difference....but the whole LED assembly is different story cost wise..

 

have a High Country now and cant say its any better than the LT I had with replaceable bulbs tbh, wish Chevy would just do same as GMC and put LED in every trim

Posted
18 minutes ago, Dunn said:

did same with 2 LTs....was night and day difference....but the whole LED assembly is different story cost wise..

 

have a High Country now and cant say its any better than the LT I had with replaceable bulbs tbh, wish Chevy would just do same as GMC and put LED in every trim

Still blows my mind that im 2023 auto manufacturers still put in halogens.

  • Like 1
Posted
On 12/10/2023 at 8:20 AM, 64BAwagon said:

I put the Lasfit H11's in my LT and its an entirely different experience when driving at night. For less than $100 its a complete transformation. https://www.lasfit.com/products/lcplus-h11-h9-h8-led-headlight-bulb?rq=na_led-bulbs~mk_chevrolet~md_silverado-3500~yr_2023~zq_lt~dz_low-forward-lighting

 

(same lamp for high and low)

So does a guy need two sets of those? Two bulbs for each side?

 

I really should do it. On occasion, depending on conditions, it almost appears the lights are off! When driving. 
 

You seem to have a solid grasp on electrical. Is there any reason to fear our electrical system with these bulbs? Like could they stress the wiring?

 

Thanks. 

Posted

You would need 2 sets. My lows were H11 and highs were H9.  The H11 LED bulb will fit in both high and low. As far as wiring the LED's pull less power than the stock bulbs so I dont anticipate any issues. They have really improved the quality of them over the last few years. There are even brighter ones than what I put in my truck but I wanted something that was still reasonable rather than blinding all the oncoming traffic.  Your truck should be the same as mine. The fender liner needs to be pulled back by removing the front 5 or 6 screws (T15) and pulling the liner back. There are some issues with tight spaces so dont be in a rush. 

 

20231126_172819.jpg

  • Like 1
Posted
6 hours ago, Pryme said:

So does a guy need two sets of those? Two bulbs for each side?

 

I really should do it. On occasion, depending on conditions, it almost appears the lights are off! When driving. 
 

You seem to have a solid grasp on electrical. Is there any reason to fear our electrical system with these bulbs? Like could they stress the wiring?

 

Thanks. 

Totally worth the upgrade. Your OCD tendencies appear like mine hahaha, so worth noting the fans on the led units are audible when your truck is powered off and the lights are on. 

  • Haha 1
Posted
1 hour ago, the8rotor said:

Totally worth the upgrade. Your OCD tendencies appear like mine hahaha, so worth noting the fans on the led units are audible when your truck is powered off and the lights are on. 

The ones on my OEM lights on the Equinox are very loud. I dont notice the ones on the Lasfits in my truck. 

  • Like 2
Posted
3 hours ago, 64BAwagon said:

The ones on my OEM lights on the Equinox are very loud. I dont notice the ones on the Lasfits in my truck. 

Funny you mention that. My vleds are significantly quieter than my wife's oem ones on her honda as well. 

  • 9 months later...
Posted (edited)

I'm wondering if anyone has just swapped out the high beam halogens for LEDs? I'll explain my question. In 2022 my nephew swapped out the halogens in my 2017. All was great in the fall, but once winter arrived & I was driving during snowfalls @ night, I hated that the low beams were LEDs. They were so bright it was like driving into a white wall.

 

I'm thinking that by keeping the low beams stock I'd have better visibility when it's snowing.

Edited by revrnd
  • Like 1
Posted
On 12/11/2023 at 11:18 PM, the8rotor said:

Still blows my mind that im 2023 auto manufacturers still put in halogens.

 

Some of us like the ~$20 replacement bulbs instead of a ~$1000 assembly when it dies.

 

Now not running an easily replaceable LED bulb in the brake/reverse/turn signals is an argument.

  • Like 2
Posted
13 hours ago, OS RR said:

 

Some of us like the ~$20 replacement bulbs instead of a ~$1000 assembly when it dies.

 

Now not running an easily replaceable LED bulb in the brake/reverse/turn signals is an argument.

I remember a story on the local news about a consumer upset that the 'steerable' headlight on her SUV (a European brand) was going to cost her $3,000. TBH, I dont have a lot of sympathy for people like that. Buy an expensive vehicle w/ a lot of fancy (but are they necessary) goodies & then complain about repair costs.

 

How much would it cost per vehicle if the halogens were replaced w/ LED bulbs? Maybe the Customs be built w/ halogens, the LTs have the LED bulbs. The higher end LTZs & High Countrys would get a specific fancy headlight/DRL assy...

Posted

I too think it’s ridiculous that all trim levels aren’t LED. Also don’t like the electric parking brake, but somebody had to make their bonus…

 

Installed 2 sets of LASFIT LAplus H11’s in my custom. Had to aim them down a bit with a long hex wrench. Performance-wise, they aren’t perfect but maybe 75% of what you get out of an OEM setup IMHO.

 

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,915
    Total Members
    8,960
    Most Online
    ChristopherDobson
    Newest Member
    ChristopherDobson
    Joined
  • Who's Online   2 Members, 0 Anonymous, 1,164 Guests (See full list)


  • Latest Articles

  • Posts

    • Monthly payment is only part of the equation. With today's prices and interest rates, I'd look at the total monthly cost: payment, insurance, registration, fuel, maintenance, and expected repairs. A vehicle that fits comfortably into your budget is usually the better choice than stretching for a higher trim. I've also kept my vehicles longer over the past few years. New cars have gotten expensive enough that driving one for 10+ years, while staying on top of maintenance, often ends up being the most cost-effective approach.
    • 10 Ford and Chevy engines proven to reach 300,000 miles   You may note a common 3K OCI on this list of gas motors. I skipped over the diesels. Dh'O. 
    • Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...