Jump to content

Recommended Posts

Posted

I recently had my radio checked out and was told by the dealer that my radio control module was bad so I found one with the same numbers on eBay and purchased it. After I installed it, none of the radio functions worked properly. Buttons that I pushed didn't do the proper command Does this new control module have to be programmed to the truck?

In the photo the original is on the left and the new one is on the right

20230729_184934.jpg

Posted

There are some OBD2 scanners that allow you to update modules. If you do a lot of your own work they are worth getting. 

Posted

If memory serves correct, you can buy them preprogrammed, or not, but it will have to programmed by the dealer at some point to work.

  • 11 months later...
Posted

Did you ever figure out the issue ?

also what were your symptoms that prompted you to go to the dealer ,

I believe I am having the same issue , 

for me screen is black , no Bluetooth / no backup camera ,no outside temperature , ,please let me know 

Posted
4 hours ago, Conman102 said:

Did you ever figure out the issue ?

also what were your symptoms that prompted you to go to the dealer ,

I believe I am having the same issue , 

for me screen is black , no Bluetooth / no backup camera ,no outside temperature , ,please let me know 

The OP was a 2 post and gone. If you do need to swap out the module it's best to get ahold of https://www.whiteautoandmedia.com

They can program the modules. 

  • Like 1
Posted
24 minutes ago, Conman102 said:

Sorry, electrical/module stuff isn’t really my thing, I don’t know what you mean by

“ the op was a 2 post and gone”

 

As in the guy your asking if he fixed the issue made 2 posts on this thread and never logged back into the site. Short answer, he won't be giving you an answer.  

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,739
    Total Members
    8,960
    Most Online
    JimmyB4
    Newest Member
    JimmyB4
    Joined
  • Who's Online   5 Members, 0 Anonymous, 422 Guests (See full list)

  • Latest Articles

  • Posts

    • Good question, I don't remember for sure but I believe it was the HD. I will check and get back to you.
    • Point of the post sir was that while both wages and cost are rising EVERYWHERE; the cost is rising faster EVERYWHERE than the ability to buy EVERYWHERE. We're not going down the location rabbit hole. I'm aware of what economic migration is. I've lived in four states including Texas.   It's what "Purchasing Power" means.   I'm not telling you what I think. I'm telling what the government, your government, data shows.   It wasn't an argument. It wasn't a suggestion. It was a statement of FACT. You are absolutely entitled to your own opinion. Your not entitled to your own facts. If you and I were, they wouldn't be facts.    fact /făkt/   noun Knowledge or information based on real occurrences. "an account based on fact; a blur of fact and fancy." Something demonstrated to exist or known to have existed. "Genetic engineering is now a fact. That Chaucer was a real person is an undisputed fact." A real occurrence; an event. "had to prove the facts of the case." The American Heritage® Dictionary of the English Language, 5th Edition • More at Wordnik   If you'd like to disagree call your Senator or Representative and let him know his departments are in error. But you and I? We are not doing this. 
    • Probably a one and done post, but do you have a CEL on the dash? Was having issues with my transmission, fortunately only a week, and it turned out to be the transmission harness. Valve body was in good shape, so new harness with all the sensors attached, new fluid, and filter. Seems to have worked so far?
    • Two interesting tidbits of information which are NOT related were just released.   One, regarding the possible thrust bearing issues / engine failures with the 3.0. Demonworks just did a segment in which they believe they may have found "a" or "the" cause of thrust bearing failures: A missing thrust bearing. If the engine doesn't have all its thrust bearings from the factory, the missing bearing can cause extra play which ends up destroying a nearby thrust bearing which then sends metal through the engine.       Of other importance, Lake Speed Jr released some interest information regarding oil weight selection for the 3.0. Comparisons of:   AcDelco 0w20 Dexos D Mobil 1 ESP x2 0w20 Dexos D Mobil 1 ESP x2 0w30 Mobil 1 ESP x4 0w40. Mobil Delvac 5w40   Spoiler alert: The Mobils are PAO Ester -base and the ACDelco is a Group III base. Mobil shows lower wear in their tests for similar weights. Additive packages between 20-30-40 weight ESP's appear to be the same, but only 0w20 is Dexos D licensed. Wear is even more reduced with 30 and 40 weight ESP although all perform very well and resist shear and provide very similar viscosities within temperature operating ranges in the 3.0.   There are even more surprises, so just go watch it.    
    • Hello Guys I'm new to the form,         I just put a 7-inch Rough Country lift on my 2016 GMC Sierra 1500 with the 5.3 and I also put a Borla exhaust on it. But I noticed when I'm in park or in neutral and then I rev my truck up really quick there is a bad click noise and I think it's coming from the motor somewhere. Anyways I got a video of it I will attach below I was just wondering if you guys think its rod knock or lifter tick or something like that because I know the AFM kind of made the lifters weak on these trucks.       Thanks!!!!! RIP - Chevy 5.3 IMG_6043.mov    
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...