Jump to content

Recommended Posts

Posted (edited)

My 2019 6.2 AT4 started having a tick about 3 weeks ago. The tick started for about a week and then went completely away for another couple of weeks. The Tick started again today and I scheduled service next week. I have a few questions for those that have experienced the issue:


I've read on the forum and it appears the tick can be lifters or from an injector. Has anyone had anything else had other problems that caused the tick?

It seems strange that a lifter issue would simply go away for a few weeks. If a lifter fails it would seem to be a persistent issue. Has anyone heard of the lifter issue masking itself for a brief duration? 

Are there aftermarket lifters that are known to prevent this going forward? 

I heard there was a class action lawsuit on the lifters but cant find much about it. Does anyone know where it stands?

I have an extended warranty but in just about every case I've had in the past they've found a way to deny any claim I've made. If I have to pay for this out of pocket what will it run?

 

Thanks so much for all of your input.

Edited by Chris walker
Posted
6 hours ago, Chris walker said:

My 2019 6.2 AT4 started having a tick about 3 weeks ago. The tick started for about a week and then went completely away for another couple of weeks. The Tick started again today and I scheduled service next week. I have a few questions for those that have experienced the issue:


I've read on the forum and it appears the tick can be lifters or from an injector. Has anyone had anything else had other problems that caused the tick?

It seems strange that a lifter issue would simply go away for a few weeks. If a lifter fails it would seem to be a persistent issue. Has anyone heard of the lifter issue masking itself for a brief duration? 

Are there aftermarket lifters that are known to prevent this going forward? 

I heard there was a class action lawsuit on the lifters but cant find much about it. Does anyone know where it stands?

I have an extended warranty but in just about every case I've had in the past they've found a way to deny any claim I've made. If I have to pay for this out of pocket what will it run?

 

Thanks so much for all of your input.

Aaaah this can be a really bad problem. Search collapsed lifter on this forum. I would get your truck into a GM dealer right now. If it was my truck I would stop driving it and have it towed to a dealer. Collapsed lifters/lifter failure causing camshaft damage and possible engine failure is a known problem on the 6.2 and the 5.3L engines. I am not trying to scare you but lifter noise can be the only warning you get before engine failure.

 

Please keep us informed about this situation. Good luck.

Posted

I just picked up my 2019 RST from the dealership this evening. Exactly the same symptoms as the OP reported.... Collapsed lifter on cylinder #5, camshaft damage. A week later and 9800.00 bill I am beyond pissed at GM...

 

Take the advice of bikerjon

Posted
15 hours ago, Andy Chabot said:

I just picked up my 2019 RST from the dealership this evening. Exactly the same symptoms as the OP reported.... Collapsed lifter on cylinder #5, camshaft damage. A week later and 9800.00 bill I am beyond pissed at GM...

 

Take the advice of bikerjon

Very very sad to hear this. How many miles on your truck? No help from GM?

  • 2 weeks later...
Posted
On 11/3/2023 at 3:14 PM, Chris walker said:

My 2019 6.2 AT4 started having a tick about 3 weeks ago. The tick started for about a week and then went completely away for another couple of weeks. The Tick started again today and I scheduled service next week. I have a few questions for those that have experienced the issue:


I've read on the forum and it appears the tick can be lifters or from an injector. Has anyone had anything else had other problems that caused the tick?

It seems strange that a lifter issue would simply go away for a few weeks. If a lifter fails it would seem to be a persistent issue. Has anyone heard of the lifter issue masking itself for a brief duration? 

Are there aftermarket lifters that are known to prevent this going forward? 

I heard there was a class action lawsuit on the lifters but cant find much about it. Does anyone know where it stands?

I have an extended warranty but in just about every case I've had in the past they've found a way to deny any claim I've made. If I have to pay for this out of pocket what will it run?

 

Thanks so much for all of your input.

This is certainly not what we like to hear, Chris walker.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2019 Cadillac AT4 is having a ticking noise. To do so, please send an email to [email protected] with ATTN: Chris walker/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s Privacy Policy, please visit https://www.gm.com/privacy-statement.html. The information you provide may be monitored and recorded and is subject to the GM Privacy Statement.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

Posted

Unless you have warranty why does everybody take their truck into a dealer for major repairs like this? You’re paying a much higher rate than you would for a good independent shop. For $9800 my DFM better be gone forever. 

  • Like 2
Posted
7 hours ago, MadMatt3883 said:

Unless you have warranty why does everybody take their truck into a dealer for major repairs like this? You’re paying a much higher rate than you would for a good independent shop. For $9800 my DFM better be gone forever. 

The easiest answer is probably major engine repairs aren’t common. They’re transmission shops everywhere. Brakes and oil change shops too. I’ve had one engine fail including all my hot rods in over 50 years. The one engine failure was just out of warranty they replaced it, I paid the labor. My favorite shop of over 40 years was my muffler guy and out of warranty repair guy. He didn’t do engines unless you bought one to him. No money in it. You had to be a friend or good customer. 

Posted
On 11/3/2023 at 2:14 PM, Chris walker said:

It seems strange that a lifter issue would simply go away for a few weeks. If a lifter fails it would seem to be a persistent issue. Has anyone heard of the lifter issue masking itself for a brief duration?

 

No. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • GDI Injector tips are in the combustion chamber and yes, they are subject to the same aromatic hydrocarbon based carbon build up the entire chamber is subjected to. Chevron Techron is a PEA based cleaner (polyether amine)  that is VERY effective if the dose is high enough.  Carbon the tips disrupts the spray pattern so keeping them clean is kind of a big deal. It will clean more than the injector tips. It will keep the inside of the injector tip clean as well. When they shut off they 'hot soak' building varnish internally behind the pintle. The tip, unlike most MFI systems have several orifices of very small diameter. They have to stay clean to work right. That spray pattern is supposed to spray into the cup in the piston, not all over the cylinder walls. Old guys will understand...    Top Tier Chevron has enough of the cleaner to be effective if used regularly. Other solutions could be Shell V Power Nitro + Premium and Exxon/Mobil Supreme Plus Premium ONLY use a different chemistry to the same effect with the added bonus of a friction/antiwear additive as well. Red Line SI-1 is PEA based as well with an upper cylinder lube. There's a white paper on their site for shock treatment of system left untreated for long periods. AMSOIL PI has a full system cleaner of yet another chemistry that will strip carbon out of the power cylinder pretty quick. Gumout Regane is also PEA based but at very low doses and those that are isopropanol based will not be effective. Alcohol content is way to low. Chevron Techron in any pump gas, Use by package instructions. 10 oz per 15 gallons every 3,000 miles. First use may require two treatments.    So, Techron, Red Line SI-1 and AMSOIL PI if batch treating and Shell, XOM Premium or any Chevron Fuel will not just keep it clean, but will clean it if dirty. No other fuel "I'm aware of will do that".    Flex Fuel motors. If you use at least 40% alcohol on a regular basis they won't carbon at all. PEA is not recommended for fuels over E-20     (www.carparts.com)
    • It is always a good idea to exercise it at least every few months to make sure the actuators don’t get stuck. It is also a good idea to actually drive it for at least a few hundred feet when you do that so seals experience motion and oil movement.  Off pavement or snow/ice is best for this, but driving wet pavement in a straight line for a  short distance will work if you don’t have other options. I have  forgotten and gone as long as six months between exercising it on my 2021 and it has always shifted promptly.  I usually just use my straight 300 foot gravel driveway.  
    • Absolutely!  These forums are legion with posts of people complaining that their truck wouldn't go into 4WD when they needed it to.  Most of them hadn't used it ever or in years.   I try to run mine through the paces every month or so and drive it a few miles on a dirt trail near the house a couple times a year if not already off-roading.
    • The battery is  very new, The  truck is  essentially undrivable  so I have had it  towed  to the  dealer. Since  this is an E Assist  truck  the dealer  seems  the only option at this point. Scan showes multiple  codes. The  repair wll not be  cheap
    • Not a bad idea to check codes. But, if you have an old battery and/or electrical gremlins, most of those codes will be false.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...