Jump to content

2023 Refresh Stereo Upgrade

traderfjp
 Share

Recommended Posts

21GMC Enthusiast

21GMC

Posted
Posted

Does your truck come with the Bose premium sound system? Mine sounded a little muddled when I first got it. Played around with the audio control a little and now it sounds very good. 

 

Assume this is the reason you're looking at dash speaker replacements?

traderfjp Enthusiast

traderfjp

Posted
  • Author
Posted

I do have the Bose system. A friend said the tweeter on the Pioneer dash speakers don't play. He bought two sets. Returned both. 

Mshawn Enthusiast

Mshawn

Posted
Posted
On 12/4/2023 at 8:26 PM, traderfjp said:

Anyone try Pioneer TS-A709 for dash speakers? They look interesting.

I used tsa706 for the from dash they do great in my 2023 

IMG_0378.jpeg

  • Like 1
BigMick2023 Enthusiast

BigMick2023

Posted
Posted
13 hours ago, Mshawn said:

My apologies I did get the TS-A709 pioneers for dash speakers. They are 4 ohm. 

 

 

Does the door chime and turn signals sound OK with the Pioneers?

Heard others complain about it with aftermarket speakers. 

Mshawn Enthusiast

Mshawn

Posted
Posted
On 12/7/2023 at 6:26 AM, traderfjp said:

You can hear the highs? The tweeter works?

Yes makes the whole system better but you’ll want to ad an amp later. 

Mshawn Enthusiast

Mshawn

Posted
Posted

I didn’t use the kenwoods kfc -x2c but I hear a lot of good reviews from guy with our trucks. I’m going to order them and do a comparison. The door speakers , kenwood KFC 6696s are awesome in the front doors lot of bass and very clear highs and mids 

Mshawn Enthusiast

Mshawn

Posted
Posted
On 12/7/2023 at 4:47 AM, Mshawn said:

I used tsa706 for the from dash they do great in my 2023 

IMG_0378.jpeg

My apologies these are pioneer tsa 709. Yes they are very good

BigMick2023 Enthusiast

BigMick2023

Posted
Posted
1 hour ago, Mshawn said:

Yes if you do not use the inline crossover!

 

If you do use the crossover do you loose those sounds?

I see Crutchfield is out of stock.....bummer. I have points I can use there.....

 

traderfjp Enthusiast

traderfjp

Posted
  • Author
Posted
1 hour ago, Mshawn said:

I didn’t use the kenwoods kfc -x2c but I hear a lot of good reviews from guy with our trucks. I’m going to order them and do a comparison. The door speakers , kenwood KFC 6696s are awesome in the front doors lot of bass and very clear highs and mids 

That's a great idea. I woukd think the Pioneer speakers woukd be more go higher and sound brighter.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Another JR
      Parking Brake - Automatic Engagement Questions

      By Another JR · Posted

      On 2021 3500hd it consistently sets automatically when selecting park if the incline/decline is above a certain angle. 
    • Policeoff01
      Feeling Vibration and Jiggles in 2024 HD Gasser Steering Wheel

      By Policeoff01 · Posted

      Curious, did anyone ever get a fix for the vibration reported here.   I have a 2024 Silverado with 6.6 duramax.   I’m noting the same vibration resonating up through the steering shaft into the steering wheel.    Best way to describe- like someone is tapping on the steering shaft/components and it’s resonating into the steering wheel.    thanks. 
    • Gkistler
      2015 Sierra Denali L86 cyl 5 misfire at idle

      By Gkistler · Posted

      Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • zibzer2
      Pulsating Noise 4Cyl Mode

      By zibzer2 · Posted

      2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...