Jump to content

Recommended Posts

Posted

Hi guys.

 

I have a 2024 2500 6.6L gasser with the 10 speed now with 6k miles on the odometer.  On cold start up (e.g. before heading to work in the morning, or in the afternoon on the way home), I get what I think is belt squeal.  It lasts for 15-20 seconds, and it sounds much worse when I put it in R or D with my foot on the brake.  (The cab is so well insulated, I have to open my door or roll down the window to hear it.)

 

I’ve had it to the dealer twice.  First time they said they couldn’t replicate the problem, which was ridiculous because it did it when I picked it up.  The second time they replaced the belt and idler pulley, but the problem persists.

 

I’m thinking perhaps something about the belt and pulleys is not aligned correctly??  Or could it be something internal to the transmission??

 

Has anyone successfully solved this problem?

 

Here are a couple of vids.  You can hear it really start when I drop it into R and then disappear 10-15 seconds later.

 

https://youtube.com/shorts/0HFmp5OGIPM?si=YbCZewrJhMgLuFFx

 

https://youtube.com/shorts/QbSJIw1oYBo?si=DIqD6jAhsdh7QZ3q

 

Thanks!

  • 2 weeks later...
Posted

Get a mechanics stethoscope and have at it. 

... I had to get one to find a sound that was like a barring going, but i could not find it no mater what i did. I finally thought of the mentioned stethoscope and after a bit of searching with it, found the rear small barring on the alternator was the culprit. 

Posted

My 2021 with the 6 speed does the exact same thing.  It's only happens when the truck is cold, but is worse when the ambient temp is warmer/hotter... if that makes sense.

 

It does it for 10-15 secs, is worse when in gear, not moving, just like what your videos show.  It goes away quickly when I being to drive off, and never returns until it has sat for several hours.  I was wondering if it was transmission related, but with the same issue in your 10 speed tells me it most likely is not.

  • 2 weeks later...
  • 1 month later...
Posted

Has anyone had any success  determining the squealing sound? Bought the same truck - 2024 Silverado 2500 - 6.6 L Gas engine.  Noticed the squealing start around 500 miles.  We hear it on startup especially once you hold the brake then shift into forward  or reverse - last for about 30 to 45 seconds. However the same sound appears consistently while driving and you hit the pedal to accelerate.      Have had it to the dealership twice which has been no help. 

Posted

Like i used to say at work. ( it isnt going to get done talking about it ) 

 

  So,,,, why not try some simple things. Like a spray of belt dressing, loosen the belt, turn/shake/feel all the moveable pulleys and such for a possible bad one, or an alternator barring bad. 

 

   I had to buy a mechanics stethoscope to find a sound like a barring going bad. I couldnt find that noise no mater what i did before. I loosened the belt everything moved as it was intended. I started the motor, put that cheap $14 steath on and found the rear barring of my alternator, the small one sounded bad, it moved fine, but after a new alt, noise was gone. 

 

 ( this was on my other pickup, not my new cheby ) By the way, it was a lousy $55 for the core charge on the alt, so i kept it, it cost $42 to fully rebuild the oem that i just gave away a few weeks ago, after not needing it for the last 4 years. So, i should have taken the $55. 

 

And, no noise on my 2024 6.6 gasser WT pickup, so far. 

Posted
On 5/19/2024 at 6:01 AM, CSB7071 said:

Has anyone had any success  determining the squealing sound? Bought the same truck - 2024 Silverado 2500 - 6.6 L Gas engine.  Noticed the squealing start around 500 miles.  We hear it on startup especially once you hold the brake then shift into forward  or reverse - last for about 30 to 45 seconds. However the same sound appears consistently while driving and you hit the pedal to accelerate.      Have had it to the dealership twice which has been no help. 

Mine does the same.  Doesn't matter how long it's been running, but if I'm going 40-50 MPH and am on and off the throttle lightly while coasting, I get the same chirping sound.  It goes away with a bit of throttle or a downshift so I don't think it's belt-related.  Was going to take mine in also for this.

  • 3 weeks later...
Posted

Get a mechanics stethoscope and find it or waste time with the dummies at the dealer.

Posted
On 5/20/2024 at 1:27 PM, UWSkier said:

Mine does the same.  Doesn't matter how long it's been running, but if I'm going 40-50 MPH and am on and off the throttle lightly while coasting, I get the same chirping sound.  It goes away with a bit of throttle or a downshift so I don't think it's belt-related.  Was going to take mine in also for this.


I have the same chirp in the same scenario you described. Did you ever take yours in for it? 

Posted
5 hours ago, Salzette said:


I have the same chirp in the same scenario you described. Did you ever take yours in for it? 

It goes in on Thursday unless something comes up.

Posted
On 6/17/2024 at 4:30 AM, Salzette said:


I have the same chirp in the same scenario you described. Did you ever take yours in for it? 

dealer pinged me and said I'd need to leave the truck for 25 days before they could look at it... looking for different dealership, so no, haven't had it in.

Posted
9 hours ago, UWSkier said:

dealer pinged me and said I'd need to leave the truck for 25 days before they could look at it... looking for different dealership, so no, haven't had it in.

Consumers can’t help each other if this kind of stuff is kept anonymous. 

Posted
4 hours ago, Another JR said:

Consumers can’t help each other if this kind of stuff is kept anonymous. 

autonation, Gilbert AZ

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,914
    Total Members
    8,960
    Most Online
    AidenVorpagel
    Newest Member
    AidenVorpagel
    Joined
  • Who's Online   0 Members, 0 Anonymous, 1,299 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.
    • 286,740 Mile Services   8/6/2026   New AC Compressor. Refrigerant oil and dye, evacuate and charge system.  New exhaust system from cat back.  New Iridium plugs plus replace #3 coil Repair/rewire headlamp wiring (passenger side) and replace all forward bulbs. Polish lenses of both assemblies.  Pull rear rotors, clean and adjust parking assembly. Inspect, clean and grease front calipers. Check pads and shoes.  4 wheel power bleed of brake system. Dot 4 Reset idle speed 50 rpm higher New Serpentine belt.    Will need new pads in the rear in about 5K more miles.    Tax Title and License out the door just short of a grand.    AC clutch had bitten the dust. 1 year warranty on the pick and save replacement. Thing will make a Polar Bear cry Uncle.  He spent quite some time on the wiring. It was in the harness and he does nothing half. I got off cheap. I have considerable more light down the road. Sylvania Silver Star replacements.  Gas seal between the porcelain and shell of plug #3 was blown, cooked the coil. That was the cold miss.  Love the new exhaust. I can sneak into the neighborhood again.  Nice to have a working parking brake again. Belle Tire never got it done. That was disappointing.    This was one of her bigger bills and still way cheaper than a payment even given the oil consumption. This thing cost me under a hundred a month in repairs and normal routine costs. What is my incentive to replace it? 🤔           
    • hello I recently bought a 2012 gmc 1500 with a 5.3 and have a AFM disabler on it I'm interested in doing a cam but I'm worried if I remove the AFM system I will fail smog does anyone have info if they are able to detect that or a work around to it (not talking about hot smogging) please let me know thank you  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...