Jump to content

2023 with P0562 error and Service transmission Now, unable to shift soon

kickass audio
 Share

Recommended Posts

kickass audio Enthusiast

kickass audio

Posted
Posted

I went to hop in my truck this afternoon and immediately on the Drivers Information Center it read the message "Service Transmission Now, unable to shift soon" after I started it up. The truck let me move forward and back in the parking lot just fine and I immediately restarted the truck and the message came back on the screen. When I got home which is about a 20 minute drive, I shut the truck down and immediately restarted it and the message was no longer displayed at startup. 

 

I pulled my OBD2 reader and it gave the code P0562 - Powertrain System Voltage Low as a pending fault. I unfortunately only have a basic OBD2 adapter through the torque app so I can't check body codes and things of the such.

 

I let the truck sit for about an hour in the driveway and restarted it a few times with no error on the drivers instrument cluster but this time the P0562 code was listed as active through the torque app.

 

Not once did a check engine light come on nor did I have any difference in shift pattern on my truck.

 

Leading up to this I put my truck into 4WD HI mode (I only have a single speed transfer case) on my way into work since it was snowy and a bit icy on the streets and had no issue on my drive in. I forgot to switch the truck back to 2WD mode when I shut it down and worked my shift. When I came back out it was still in 4WD HI and gave that error about not being able to shift soon.

 

Has anyone had a similar experience? I found a service bulletin https://static.nhtsa.gov/odi/tsbs/2022/MC-10212919-0001.pdf for the 2022 that indicates a potential rub on the wire harness between the PCM wires that run along the driver side of the engine just above the valve cover. I visually looked at them and don't see anything at quick glance that looks worn and it was totally dry in the engine bay. I did have service done a year ago where the data line between the PCM and the transfercase control module was giving high resistance and needed to be soldered and taped back up but had no issues all year with it. I also have a upgraded alternator and brand new battery that's only a few months old so power issues from that are not a concern.

kickass audio Enthusiast

kickass audio

Posted
  • Author
Posted

Does anyone have the exact parameter range for the P0562 code? What voltage range is acceptable?

jlivy Enthusiast

jlivy

Posted
Posted

clear codes first

12.4v - 12.8 v at the battery with everything off.

13v - 15 v running with no accessories on. 

 

read codes after. pay attention if its current/not current. and if there is any systoms codes with it

 

kickass audio Enthusiast

kickass audio

Posted
  • Author
Posted
13 hours ago, jlivy said:

clear codes first

12.4v - 12.8 v at the battery with everything off.

13v - 15 v running with no accessories on. 

 

read codes after. pay attention if its current/not current. and if there is any systoms codes with it

 

thank you! The battery was holding great voltage at rest, never lower than 12.7V, with the engine running and being cold outside the high output alternator would maintain a voltage around 15.2-15.6v. The only voltage issue I noticed is when the truck would shut the engine off with auto stop enabled and my voltage would get to 11.9v with the engine off and would drop to 8.6V for a millisecond when it would crank the engine to get me going again then would go back to 14.8-15.6v of power.

  • 1 year later...
Jeff5 New Member

Jeff5

Posted
Posted

Hello,

 

I have the exact same issue on my 2023 Chevy Silverado 1500. It happened about 3 months ago and the dealership changed the gear shift control module. Now throwing the same error, no check engine light, and OB2 showing a P0562 code. Anyone found a root cause for this scenario?

 

 

  • 4 months later...
Frankielozano214 Senior Enthusiast

Frankielozano214

Posted
Posted

Mines done this few times. I heard it happens if  it something to do with shifter not sure what but mine hasn’t said it in while (seen the msg like 4 different times) usually goes away quick wasn’t sure if it had something to do with my truck being super lifted on big tires or not

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Jus Cruisin
      2027 GMC Sierra: Official Discussion

      By Jus Cruisin · Posted

      I was the GM of a Lincoln Mercury dealership back in the 80's. The service lot was always full with "broken" ones. Plenty of transmissions, power windows and a/c repairs. The only one I'd consider owning would be the Marauder at this point and it certainly wouldn't be a daily driver.  My 2025 GMC Sierra 1500 Denali Ultimate is my "Lincoln Town Car" in my retirement. I want all the "stuff". Big infotainment screens, one touch power windows, Supercruise (I won't buy another vehicle without it), hands free pretty much everything. I'm going to swap my current truck for a 2027 Yukon Denali Ultimate so I can have the air suspension and surround vision recording along with all the other "stuff". 
    • Byrds8
      Ac not keeping up

      By Byrds8 · Posted

      Yep mine is on backorder also.
    • smit303
      2027 GMC Sierra: Official Discussion

      By smit303 · Posted

      The Denali Ultimate's grille is tinted, but the "regular' Denali has a bright chrome grille like the current models.
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      Because that is IDIOTIC, much like this question. They've already been forced to do it by past administrations - why would you roll that back when it's a GOOD thing?  WHO IS ARGUING FOR LOWER MILEAGE???? 😂  NOBODY IS!!   I'm certainly not! What I want is RELIABLE vehicles again that are worth the price paid!    I don't get your logic here ...   In 2003 I paid $2,200 for our '86 Grand Marquis. It's STILL running and I've never been inside the engine, aside for the timing cover since it was leaking, so I threw a new timing set in since that makes sense. Transmission is ORIGINAL. Electric pump in the gas tank is ORIGINAL. Rear end is ORIGINAL. I'd have to hit my head REAL hard to want to pay $60k or more for a car that still can't come close to the comfort, seating and storage space, or reliability of this one. Nothing is even in the ball park! Hundreds of thousands of brands and models have been built and sent to the crusher while this one keeps on going!   https://postimg.cc/Z9XRrCSg   I've got a whole fleet of cars, motorcycles, and a truck close to this age for summer and winter. No one could pay me enough to buy anything built this century. I have zero use for any it.
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      Since I'm the one who has to fix them when they break, I'll take vehicles over 30 years old all day, EVERY day, over ANY modern crap. Have you attempted any repairs on anything built after 2006? It's a friggin nightmare, and gets worse the newer the model year.    If I had the will or desire, I can make any car of any age outside of a Model T (I don't have THAT much will ...) just as powerful, comfortable, and have all the tech the new stuff does, and get pretty close in mileage, too. I prefer SIMPLICITY. The less the vehicle has, the less to fix WHEN it breaks, not IF.   I'm glad you snot-nosed punks don't like them. More for us, plus that keeps the prices from climbing more than they already have.👍

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...