Jump to content

TPMS For RV'S

Badbird2000
 Share

Recommended Posts

Badbird2000 Enthusiast

Badbird2000

Posted
Posted

Maybe this topic has been asked and covered, i didn't find much. I bought a new 2024 GMC Sierra last year, with a 6.2 and max tow package. I have a 2020 Rockwood MiniLight that came with a tire pressure monitoring system, and the dash mount device. I had new tires put on the camper last year, and the first time i pulled it with the new truck i tried to set up the existing system. For whatever reason, couldn't get them to register. I followed the directions on the trailering app. After that i got thinking, should my truck have come with extra sensors in the glove box? I purchased it out of state, and it was delivered to me, so i never got to ask about it before hand. If the trucks don't typically come with them, well, kinda lame, but ok. I assume i can buy the correct type online that will mate up with the truck trailering app? Everything else works great, pulls like a dream.

redwngr Senior Enthusiast

redwngr

Posted
Posted

On most trims the sensors for TTPMS are a separate order item from the trailering app. 

 

image.thumb.png.4ff7efa23c56422c20080f6923cbf611.png

 

They are only standard on AT4X and Denali Ultimate

Available on AT4 and Denali (without adding other options)

Available on SLE and 3SB version of Elevation (note 1 applies)

Available on SLT (note 2 applies) 

 

1500. Sierra max tow (NHT) is only available on SLE, Elevation (3SB) or SLT.

You have NHT, so trailer sensors would have been extra.  

 

Check the QR code on the bottom of the doorpost of your truck.

If the rpo codes listed include PTT then your dealer owes you a set of sensors. 

 

 

  • Like 1
2016 Sierra Owner Senior Enthusiast

2016 Sierra Owner

Posted
Posted

In 2019 the extra sensors for the trailering package were included. They made them a separate item that had to be added in the 20+ trucks.

 

On that note. They changed the frequency that the sensors work off of on the trucks tires in the refresh models. I don't know if that applies to the trailer sensors or not. I would think it was changed also.  If you do buy a set I'd make sure the frequency is correct on the ones you buy. 

  • Like 1
newdude Senior Enthusiast

newdude

Posted
Posted (edited)
7 hours ago, 2016 Sierra Owner said:

In 2019 the extra sensors for the trailering package were included. They made them a separate item that had to be added in the 20+ trucks.

 

On that note. They changed the frequency that the sensors work off of on the trucks tires in the refresh models. I don't know if that applies to the trailer sensors or not. I would think it was changed also.  If you do buy a set I'd make sure the frequency is correct on the ones you buy. 

 

 

2019-newer all use 433mHz.  For the refresh they changed the operation of the sensors from a manual learn sensor to an auto learn sensor and there in lies the compatibility issue in using a pre-refresh TPMS on a refresh and vice a versa.  They talk to the trucks different than 19-22.  

Edited by newdude
  • Like 1
2016 Sierra Owner Senior Enthusiast

2016 Sierra Owner

Posted
Posted
6 hours ago, newdude said:

 

 

2019-newer all use 433mHz.  For the refresh they changed the operation of the sensors from a manual learn sensor to an auto learn sensor and there in lies the compatibility issue in using a pre-refresh TPMS on a refresh and vice a versa.  They talk to the trucks different than 19-22.  

Oh ok. All of the past posts I've seen always said the Frq had changed as well with the refresh. Thanks

 

redwngr Senior Enthusiast

redwngr

Posted
Posted
12 hours ago, newdude said:

 

 

2019-newer all use 433mHz.  For the refresh they changed the operation of the sensors from a manual learn sensor to an auto learn sensor and there in lies the compatibility issue in using a pre-refresh TPMS on a refresh and vice a versa.  They talk to the trucks different than 19-22.  

 

Did the TTPMS sensors also change to auto learn?

 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • JimCost2014
      Towing In Loose Gravel

      By JimCost2014 · Posted

      If what you are doing works, keep doing it:   4LO (Four-Wheel Drive Low) should only be used in extreme low-speed, high-torque situations such as deep mud, heavy snow, steep rock crawling, or extreme inclines/declines, and you must follow the correct engagement procedure to avoid drivetrain damage. Intended Use Cases Deep mud or snow where traction is extremely poor and you need maximum torque to get unstuck Trucks Only+1. Rock crawling on steep, uneven terrain forum.fullsizechevy.com+1. Extreme inclines or declines where you need to control speed and maintain traction solutionsphere.blog. Heavy towing in low-traction conditions (e.g., deep sand, ice) carclubsusa.com.
    • rdonarski
      Towing In Loose Gravel

      By rdonarski · Posted

      Hi,   I work a steep boat landing that has patchy blacktop going down the hill and soft sand/gravel at the bottom. Due to low water levels, it's not always possible reach the blacktop. I've had to help several people get out this year already and with fall coming, I'm anticipating more. I always use 4L. There was a gentleman there today with a 2500 HD (actually 2 - him and his son both have them) and they were trying to get his son's wake boat out. This gentleman swears that you should use 4H in the soft gravel. Says he was a farmer and you always use higher gear when stuck. I was wonder what your thoughts on this are? If I'm wrong, it would be good to find out before things get busy.
    • Bill Lemmond
      Roll up bed cover experiences

      By Bill Lemmond · Posted

      Looking for feedback from users of roll up aluminum slat bed covers who have had it for more than 3 years. I prefer the aluminum slat style over supported vinyl covers due to security and the capacity to support a light load. The slight loss of bed opening when rolled up is not an issue. Presently have BAK Revolver the "industrial grade vinyl overlay" on mine is shrinking & coming loose at the rear and on both sides in addition to cracking at some of the folding joints. Truck lives outdoors in NC latitude. Can't justify the steep price to replace it with another one if that's the expected lifespan. Do you have a better alternative?
    • Bill Lemmond
      BAK Revolver bed cover

      By Bill Lemmond · Posted

      Thanks, your last sentence is the root of my problem, outdoors truck and southern latitude = UV overload. Looking at replacing with Rough Country powder coated aluminum slat roll up model. 
    • JakeD
      Tire fitment

      By JakeD · Posted

      I’m looking at putting a lift in my 2024 gmc sierra 1500 elevation trim, has anyone had any luck with fitting a bigger tire under the rear for a spare?? Was gonna go with a 4 inch zone lift Also what wheel and tire size setup are you all running? Wondering if I can get away with keeping around the stock size a 33 inch, and just get some new wheels to have enough back spacing then I can just keep my original spare tire I have under the truck now.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...