Jump to content

side view camera

Tim Cullins
 Share

Recommended Posts

davester Senior Enthusiast

davester

Posted
Posted

If that's how your owners manual describes how it works, then I believe some people have put in a trailer plug so it tricks the truck into thinking a trailer is connected (not just the physical plug, but also w some connections [ie, resistors] so the truck senses that trailer lights are there).

davester Senior Enthusiast

davester

Posted
Posted

Yes, the plug has to make the truck think the lights are there, that's how the truck "knows" a trailer is attached.  So the plug would need to have some resistors (of the correct size/watts) for the running lights and brake/turn signals.

PBNB Enthusiast

PBNB

Posted
Posted

I got my cameras to come on all the time... with turn signals.

 

Sort of a result of the Diode Dynamics C1R that I am running in the hitch. It is plugged into the 7 pin system. The truck thinks I have a trailer connected.

 

I am using this C1R since I am blocking my 3rd brake light with my rooftop tent.

 

Here is a link:

https://www.diodedynamics.com/hitchmount-led-pod-reverse-kit.html?srsltid=AfmBOoqOqHooGdMTtAsBhB2fa6UxZovj80P1trAmT1Ph9d4AwNLdR6hv

 

  • Like 1
StingerZ16 Enthusiast

StingerZ16

Posted
Posted

Is there some sort of disadvantage to having the cameras on when not towing?

What about the truck thinking there is a trailer attached?

 

My Hyundai cameras come on when turn signals on. Towing or not.

Why would GM not do this too? 

 

PBNB Enthusiast

PBNB

Posted
Posted

Removal of the C1R takes about 1 minute. It just unplugs and there is a cap that goes over the connector to keep the dirt out. 

The main wiring loom that comes with the unit stays put.

I have my pin lock holding the unit in-place and so no one can steal it.

I just unlock the pin, and slide the C1R out and unplug it. Then I slide my hitch into the receiver and pin it.

It couldn't get easier and the light is super bright as aa back up light and brake light.

 

The same thing could be done with those tailgate strip lights and I think the truck would see them as a trailer as well. Any light that sits on the 7 pin connector should trigger the truck to think a trailer is connected.

 

Sort of like this link:

https://www.actiontrucks.com/product-detail/RCS78849/multi-function-led?gad_source=1&gad_campaignid=22638002763&gbraid=0AAAAADnotY3_v0jtgfK-hp22MFl7amrLK

 

Another side affect is that the rear cross traffic alert gets turned off as well. So the truck doesn't slam on the brakes when backing up and it sees something.

  • 2 months later...
rjgvt Enthusiast

rjgvt

Posted
Posted

I have a trailer lights checker I plugged into the 7 way connector in the bed of my truck that has the 5th wheel/gooseneck hitch. It gave the camera side view with the turn signal on just like having a trailer connected but it disabled the rear bumper sensors. I would rather have the rear sensors working. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Tyler Gibbs
      Travel Trailer 2024 2500 HD 6.6 Gas Engine ?

      By Tyler Gibbs · Posted

      The curb weight on a 1 ton crew cab long bed is around 7k lbs.  Now, I don't know where you went to school but 9k is not more than 2x 7k lbs. More than 2x 7k lbs would be 14k+.   With that said, obviously yes you're going to feel a 9k lb trailer when slowing down.  I already said, when accelerating.  When changing lanes?  No.  But if you look at the context of what was quoted, the original person said, "after a mile or two..." which means that would be after the accelerating portion and you're driving a generally steady pace.  Please do learn to read and comprehend.
    • sFrank
      2026 Silverado Range AFM DFM ECU loaction

      By sFrank · Posted

      So I purchased the Range unit for my 2026 and I am seeing different locations suggested for the ECM . Can anyone confirm wither under hood, left side or right side or behind the wheelwell?
    • No F-bdy Bs
      Dave's Auto (custom engine builder) tear down of L8T

      By No F-bdy Bs · Posted

      Like I've said before. Di and Carbon buildup is not that big of a concern. Engine had minimal buildup, and that engine was obviously not super well maintained. Do regular oil changes, and you're gtg as long as the rest of the truck lasts. Also, the High Pressure FP that people ****** about, but can't tell you why.  Now, I wish they'd trash the variable oil pump. No real world issues with them, but I'll gladly eat whatever miniscule MPG it's saving me in favor of more oil at all RPMs.    Curious to see his assessment of the 7.3 compared to the 6.6. I expect he'll praise the port inj, but from a structural standpoint, the 6.6 is as robust as any engine out there.    Not to take away from the 7.3. I feel it's equally as good as the 6.6.     As to heat on the rear cyls, I'd have to see numerous examples before I'd say it's an issue. Especially not knowing the history of that engine. For all is known, they could have blown a rad hose, and ran it hot, and the 2 rear cyls may be the first to get hot in a low coolant situation, but not be an issue aside from that. 
    • Donstar
      Navigating senior years.

      By Donstar · Posted

      "Life is getting back to normal."    I'm driving again and all new joints are operating as expected for this stage of recovery.   My most recent joint replacement still requires a lot of attention but experience has taught me that time will quiet the remaining pain.  I joked with my surgeon that another joint replacement would take my mind off my most recent surgery and he responded by saying the next will be a hip!  There are no plans for another surgery but, unlike me, I don't think he was joking!  I certainly wouldn't refuse further replacement  if required but hope to spend time out of the "post-op"  period.  I can't stress enough that if you have been recommended for total hip, knee or shoulder replacement that you welcome the offer.  Post-op "recovery" may sound daunting and painful, however, this is far better than the insidious erosion of mobility you are currently experiencing.  Imagine what it would feel like to wake up most mornings feeling better and more mobile than you did the previous day!  Prior to my first surgery in June 2025, even getting out of bed was becoming a formidable task.  Since the day after my first surgery, I get out of bed everyday easily and unassisted.  Making the switch to feeling a little better each day rather than a little worse, is hugely motivating!
    • Coastie05
      ‘25 Silverado purchase- back to dealership for bumper/radio issue

      By Coastie05 · Posted

      Hope it all works out for you. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...