Jump to content

Recommended Posts

Posted

Just got a 2011 Silverado with a 6.2L. It is 4x4 ext. cab Black with black leather interior. 33,000 miles. I totally love it. Tons of power. The best mpg I have managed to get so far is 18.1 and that is with the cruise set at 55. Just wondering what is the first thing to get or have done to it to unleash the beast within? Programmer or cold air intake? Thanks in advance. Great forum guys!

Posted

Go with an air raid MIT after a BB tune

 

 

Ryan

Posted

I did the air raid intake and a resonator removal before my black bear tune. The tune was the best upgrade by far, but the intake makes a nice sound! Thinking of doing headers or an exhaust now, to much power is never a bad thing!

Posted

Been researching/reading about the 6.2 a bunch sinceI got the truck. The dealer filled it up with 87 octane. I have filled up 2 times since,once with 87 and the second time, i put in 91octane after reading that it requires it. So my question is...do I need to do the ECM fuse pull thing? Or does it realize the octane rating and change on it's own? And I will be running 91 from now on.

Posted
Fuse pull is a myth. After filling up with higher octane the tables will learn.

Sent from a jelly bean.

 

Don't tell camaro owners this they believe it adds 25 hp :lol:

 

 

Ryan

Posted

Can anyone tell me the difference between the Corsa 24524 DB Cat Back Exhaust and the Corsa 14524 Sport Cat back exhaust? There is about a $450 difference in price. The sport exhaust is the more expensive and I can't figure out what the difference is. I'm looking for a louder exhaust but not too loud. Stock 6.2 exhaust is louder then the stock 5.3 but I want a little more rumble.

Posted

I am running 2 - 2.5" Magnaflow 16" (I think) these are ran true duels and are seperated. I like the sound myself.

 

 

 

 

 

 

 

post-101798-0-58599700-1382613877_thumb.jpg

post-101798-0-25069900-1382613889_thumb.jpg

post-101798-0-58599700-1382613877_thumb.jpg

post-101798-0-25069900-1382613889_thumb.jpg

post-101798-0-58599700-1382613877_thumb.jpg

post-101798-0-25069900-1382613889_thumb.jpg

post-101798-0-58599700-1382613877_thumb.jpg

post-101798-0-25069900-1382613889_thumb.jpg

  • 2 weeks later...
Posted

sounds good.

 

I finally have my exhaust complete.

I had my buddy who is an awesome welder, cut out the stock muffler, and put in a magnaflow 22" in. before the muffler tho i had him put in a Y pipe and i have an electric cutout in there. I still have to route a pipe from the cutout instead of dumping under truck into the frame, but it sounds phenominal now.

I also had him remove the resonator and that helped bring on some deep sounds. The 3 cats really quiet this truck down tho.

I still have to get a video. And some pics.

  • 3 weeks later...
Posted

My truck makes this exact noise at the exact sound level. I believe it is a lifter issue it does it on a 95 degree day just as much as a below 30 degree morning, if the truck sits for about 4 hours it does it on a rare occasion it does not. It last around 2 to 3 minutes and fades until it has reached 190 minimum. If I wind the gear out to about 2500 rpm there is a constant lifter rattle. At idle in a drive through I can hear a faint lifter tap no matter how warm the engine. Dealer says if I pay for the tear down and they find something they will fix it, if not I'm out the tear down and reassemble $$.

 

 

youtu.be/4lxjdaOv9qE

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • I agree with Tim.  As tech heavy as engines are these days, no way I’d be an early buyer of the new 6.6.  Of course, I bought my ‘26 Denali w/the 6.2 after dumping my Tundra with it’s defective 3.5 liter imploding engine disaster, so I’m a little gun-shy.  That said, my 6.2 has been rock solid.  I don’t drive it like I do my BMW Z4 M40i, but I don’t baby it either.  I got a V8 for a reason.  But I’m averaging 18 around town and 22 highway.  I have seen 24 highway as well when I wasn’t loaded up heavy.  Considering my Tundra with the twin turbo V6 only got 14.5 in town and 17 on the road, I’ll take the 6.2 all day, every day.  If I were you, I’d grab a ‘26 while you can.  Inventories are probably gonna start dropping and I’ll bet the deals will start looking sweeter as well.
    • I am curious if anyone has figured out a way to add an hard button AUX or 360 Camera switch to the center row of switches. I have a 2021 AT4, and want to split the hill decent button and add a 360 camera button so that you don't have to go into the center display and locate the camera functionality, etc...   My father's 2024 Yukon XL AT4 and it has a hard button, see below. I found this thread on the Yukons, but it seems like there may not be a part number for the 2021 sierras. https://www.gm-trucks.com/forums/topic/255339-adding-hard-button-for-camera-on-2021/ Anyone else figured this out. Seems like it would need to be a custom switch!   I am getting ready to install the auto stop/start eliminator, so would be nice to knock them out at once.     Upvote1Downvote0Go to comments
    • Looks like the entire state is burning. 😬
    • Through the years it hasn't been my typical method as I tried to drop oil on an engine that was hot from having been worked, however that was not always practical and had to fire up a unit and let it warm up reasonably well and drop the oil when I had the time to do it but am referring to not only vehicles but a variety of farm equipment and highway tractors etc. However on a vehicle where one is crawling under it and the exhaust is nearby to ones body and if wanting to pull the plug without danger of being hit with boiling hot oil or attempting to remove a HOT oil filter, its sure safer and easier to not have everything smoking hot and can remove the filter right away when under the vehicle and let it all drain. Of course its not the end of the world if a bit of oil stays in the engine that might have eventually found its way out, I like to get out as much as possible but any oil changes that take place in shops would rarely be sitting around for very long at all before the plug is thrown back in and filter slapped on and oil poured in and sent out the door quick like. There would be very little time spent ( assuming they even did it ) in starting the engine with oil to fill the filter, then waiting to verify the level on the stick. A good reason to check ones oil level shortly after a shop changed the oil on a vehicle just to make sure its correct and to look under for any oil around the drain plug or filter. 
    • Cool to see another Vermonter!
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...