Jump to content

Recommended Posts

Posted
On 5/1/2018 at 9:34 PM, Jsdirt said:

How I drive, and where I live have alot to do with the miles I see. 

 

Back when I was 17, getting 12k out of tires was great! :lol:

Way back when I hadmy 90, the brakes locked up on the front driver side. I figured they were screwed for good and kept going to my destination. When I got there, they were glowing red so bright my buddies swore they could see through them.

  • Like 1
Posted

My 01 2500HD had 90k or there about when I sold it, all original brakes.  2006 2500HD had 112k also original brakes.  Current 2009 3500HD is 77k and all original as well.  Hooray for less traffic compared to up north I guess.  Funny that family up north comes down and b****es about the traffic here when I think it's worse up there.  Some of y'all go through brakes fast lol

Posted

7bab64adf2a70276dc13b4e87afd4fa7.jpg

Tired of gas leaking thought I’d try this


Ryan B.

  • Like 1
  • Haha 1
  • Confused 1
Posted
7bab64adf2a70276dc13b4e87afd4fa7.jpg

Tired of gas leaking thought I’d try this


Ryan B.


A pee bib


Sent from my iPhone using Tapatalk Pro
  • Haha 3
Posted
Call it what you wish.


Ryan B.




Sent from my iPhone using Tapatalk Pro
  • Like 1
Posted

I guess that I missed commenting about brakes.  My 99 truck had 186,000 miles on it when I traded it in and I had never replaced any brake pad on it.  My current 11 truck has 153,000 on it as of today and never had the pads off of it.  I do pull trailers often some with brakes some without.  It can be done you just need to watch what is going on in front of you.  :jester:

  • Like 1
Posted (edited)
5 hours ago, RyanbabZ71 said:

7bab64adf2a70276dc13b4e87afd4fa7.jpg

Tired of gas leaking thought I’d try this


Ryan B.

I feel like you must be doing something wrong to need that. 

Edited by SnakeEyeSS
  • Like 1
Posted




Sent from my iPhone using Tapatalk Pro


That was a great episode. Taco was a true innovator


Ryan B.
Posted


That was a great episode. Taco was a true innovator


Ryan B.

Sad that it went downhill. I loved that show


Sent from my iPhone using Tapatalk Pro
  • Like 1
Posted

Driving to class last night I saw this. Looks to have “frame” damage. This was basically it going straight and it looked like it was hard to control.
Looked like the body work (yes i know it is a unibody) was rotated a bit.
9cab012eed60a72687567b9db3cee0f7.jpg


Sent from my iPhone using Tapatalk Pro

Posted (edited)

WOW that front end looks TWEAKED! Can see how out of line the front wheel is with the rears -  he's almost steering halfway to the right just to keep it straight!

 

Gotta love our government. God forbid you remove some emission devices ... but you're free to endanger yourself and the public by driving with the front end falling out of the vehicle ... :thumbs: I call that, "democrat logic" .

 

 

Edited by Jsdirt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • While waiting for parts I have been working on installing the AC compressor, new accumulator, and orifice tube. Also changed out the high side ball valve (original). The orifice tube that was in there wasn't too bad. Slightly dirty, a little bit of junk, but not blocked. Glad I changed it out.   The accumulator, which should have been a 5 minute job, may have just burned $50. Put some PAG in it, wrote the date and mileage on the side, fresh o-rings and gooey'd up the threads and rings with Nylog. Got everything connected and snugged and was going to vacuum down the system, and....   My manifold gauge won't fit on the port. It's not an R12 service port. It LOOKS like an R134 service port but the diameter is a hair too large. There's a sticker on the accumulator that says it's designed to be used with R12 and R134a systems only. So it's not R1234yf. Even if I reduced the diameter slightly with a file, the shoulder on the port is too large so the quick-connect valve won't lock on. I'm stumped. It's going back, and 50/50 on if they'll give me a refund.   Also, I did a fuel pressure test.... Key on, the gauge spikes to about 60psi and quickly bleeds off, like 2psi per second. The fuel isn't going into the plenum, no smell, starts fine, so I'm guessing there's a bad check valve in the pump and the fuel is just draining back into the tank. oh, hell. But, it shouldn't be a problem, pump primes just fine and the truck starts right up. It just means I can't really ever use fuel pressure to verify a leak at the injector or intake.
    • Got this yesterday out of nowhere. Truck is a 25',6.6 gasser with 8k miles.  Only semi anomaly is that the truck had been sitting, uncranked for 6 days. Elec Stability Control showed immediately upon cranking, not while driving. No drivability issues, just the message. Battery didn't seem to be weak when cranking over.  I drove it, killed it, let it sit a few hrs with no avail.  Truck is 100% stock. No damage. 
    • This can be done.  It is not cheap and requires an instrument cluster swap with custom programming, new steering wheel with the controls on it, and a special jumper harness.   The cluster upgrade - 12.3” Digital Cluster Upgrade – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The wheel upgrade - Steering Wheel Upgrade Kit – 2022.5–2026 Silverado / Sierra (T1 Refresh Pickup) - WAMS   The column harness upgrade - 2019 - 2026 Silverado / Sierra: Steering Wheel LIN Bus Harness - Harness Dr. - DIY Done Right     The problem with doing all of this?  You pretty much can't have any programming done to your truck that involves the cluster ever again.  The dealer won't be able to program the cluster as GM's system will only pull data for the cluster the truck came with.  So it would be advised also to turn off over the air updates.   TLDR;  Should have bought an LT double cab?  You'd have a power seat, the wheel controls, the cluster, all things that you've been seeking in your various posts so far about your new WT regular cab.  
    • I was unaware of that, thanks for updating me.
    • Yes.  The 2.7 Turbomax has Active Fuel Management.  It is NOT the same as the V8s.  Totally different system.     Here is an article from GM when the 2.7 came out explaining the cylinder deactivation and the valve lift system.  Starts at the section called "SCS Valvetrain":   New Turbocharged 2.7L 4-Cylinder Engine Powers Full-Size Trucks – TechLink         This is an internet myth going around.  It was alleged that some 5.3s had this mystical 8th digit of the VIN as an "E" which somehow meant it had a new one year only 5.3 that didn't have DFM.  The writer of said article and the person that made the claim conveniently can't count because they posted the VIN.  The 8th digit was a "D" which meant its still the 5.3 with DFM.  The 9th digit of the VIN was an "E" and the 9th digit isn't the engine code.  At all.  
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...