2014+ Suspension Lifts

[pnvassil]

I do not have any issues with rubbing. I don not think I could have put a bigger tire in there without issues. I also have the MT tire, so the tread is very pronounced.

[eznonby]

Ok guys with the 6" or 6.5" lifts running 20" stockers with 35's, need some help. Between the 6" RXC and the 6.5" Zone which one rides and drives the best? Also running the 35's are you still able to fit in parking decks and auto brushless car washes?

[mrhonestlyinsane]

It is my understanding that you cannot run factory 20s with the bds suspension without spacers. I could be wrong but that is one of the reasons I went with the rcx 5 inch bracket lift. Which I got 6 inches of lift out of. Also I currently not running a 35. But I have plenty of room.

Pretty much all the other kits are knuckle lifts which alter the track. I know rcx you can run a factory 20.

[Front Runner]

Nice!

[Erik Baker]

2014 on 7-9 mcgaughys SS lift on 20x10 fuels with 35inch nitto trail grapplers

[TX_AT]

Ok guys with the 6" or 6.5" lifts running 20" stockers with 35's, need some help. Between the 6" RXC and the 6.5" Zone which one rides and drives the best? Also running the 35's are you still able to fit in parking decks and auto brushless car washes?

6" BDS Kit, 35x12.5 Toyo MT on stock AT 20" wheels. No spacers needed on stock 20's only smaller wheels.

[Front Runner]

TX_AT,

 

Time to update your signature, isn't it.

Edited January 6, 2016 by Front Runner

[SilveradoCHEVY]

What kind of grille is that?

 

2014 on 7-9 mcgaughys SS lift on 20x10 fuels with 35inch nitto trail grapplers

Edited January 6, 2016 by SilveradoCHEVY

[Erik Baker]

What kind of grille is that?

 

 

i got it off eBay i forget who makes it now, it was like $350 bucks. pretty nice for a plastic grille! and for the price

[TX_AT]

TX_AT,

 

Time to update your signature, isn't it.

I now use the tapatalk app & it doesn't show my signature, so I completely forgot about it. Good looking out, I'll update it soon.

[Kerrslight]

6" BDS Kit, 35x12.5 Toyo MT on stock AT 20" wheels. No spacers needed on stock 20's only smaller wheels.

Looks perfect. One of my favorite trucks on the forums.

[teaman]

Finally had time to post some pics. 6" BDS lift, 35x12.5 on stock AT wheels.

Does this truck fit in a 7' parking garage? Do you have an accurate measurement of the overall height?

[Iowatruckguy]

Had about one inch of rake so I put a 1/4" spacer under the strut which raised up the front a 1/2". Looks more level now.

[zoomiejr2]

6" BDS Kit, 35x12.5 Toyo MT on stock AT 20" wheels. No spacers needed on stock 20's only smaller wheels.

Awesome. Are you running the add a leaf or just the 5 inch block? And are you using spacers in the rear? Would love to see more pics

 

Sent from my E6853 using Tapatalk

[TX_AT]

Does this truck fit in a 7' parking garage? Do you have an accurate measurement of the overall height?

No parking garages in my small town but I'll try to get u some numbers later today.