Jump to content

Recommended Posts

Posted

I installed the MIT and did the airbox mod on my 14. It sounds like an Old Q-Jet on a bigblock now.

 

RT

Sound clip??
Posted

if i can find my old pics ill post them. there is 2 level you can go to, to achieve this mod. some people will bore out the bottom of there air box opening inorder to allow more air flow. Other people will actually go ahead and modify the fender cowl and open that up a little bit more to accomodate for more air into the box. The plastic induction tubing and plenum act as a strong noise supressor for the intake, and dont allow as much of it to be heard in or out of cabin.

Posted

there is a knock out plug on the side that's oval shaped and I punched it out. and run a duct down below the bumper away from the engine compartment.

 

RT

Posted

Installed my new Airaid Cold Air Intake. Super easy to do and sounds great when I get on the throttle!

497111d4f46669d20e5e45bf47a36090.jpg

  • 4 weeks later...
Posted

airaid jr tube kit is the way to go with 15 minute install and noticeable power in the lower range worth the $150.

  • Like 1
Posted

airaid jr tube kit is the way to go with 15 minute install and noticeable power in the lower range worth the $150.

Wondering about this option. Is the power difference noticeable? Where did you get it for that price?

Posted

got my direct from airaid when they first came out, noticed more lower end with little or no noise, i do run a sprint booster also

Posted

airaid jr tube kit is the way to go with 15 minute install and noticeable power in the lower range worth the $150.

I have the Airaid MIT and paid $150 for just the tube. The JR kit is closer to $200 from what I found when I was looking.

 

RT

Posted

Installed the Airaid Jr last night. drove about 75 miles last night and tonight. Unless its in my head, it seems to be going into V4 sooner and longer. I will give it a few days to learn the new air mixture before I start playing

Posted

Installed the Airaid Jr last night. drove about 75 miles last night and tonight. Unless its in my head, it seems to be going into V4 sooner and longer. I will give it a few days to learn the new air mixture before I start playing

Mine is in V4 mode more after the Airaid install but I think it's just because I HAd the battery disconnected and now it's re-learning.

 

I had two DI Traverses before this Truck and I found diconnecting the battery especially after the winter gas was done seemed to get them back to running like normal again. They both seemed messed up after winter. Wonder if the Truck is the same way.

Posted

sorry i just have just the tube not the kit for 150.00 still worth it

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Latest Articles

  • Posts

    • The LCA bolts are NOT a one time use fastener.  GM does not have them called out as such at all.   They are torque plus degree, but not a one time use TTY.  Nowhere in the service manual does it call out for replacing the LCA bolts for being one time use.  Think about it.  The LCA bolts are now the alignment adjustment point, instead of the UCA bolts like the prior generation.    A bolt that is meant to be adjusted for alignment...would it make sense to make it a one time use component?  How would you get an alignment done in the first place?  You couldn't.       Also.  What TSB exactly?  There is no TSB that I see for 2019-2026 for over-torquing LCA bolts.  There was a PI, PIT5533C, but that covered 2014-2018 body trucks for re-torquing LCA mounting bolts.  But those trucks to a 2019-2026?  Not the same, so PIT5533C does not apply.    
    • Nice looking setup!  Is this the kit you got?  If so 211 is a great deal!  https://accessories.chevrolet.com/product/trailering-camera-system-86584184   My TT came with a wireless rear camera but it only works on an app or a separate screen they sell so I've decide it's not worth the hassle since it keeps disconnecting and with wireless android auto it's a hassle trying to connect my phone to it.  So I've been thinking about adding the GM camera so it's integrated into the rest of the camera views.   I also found this one which seems to be a different PN & retail price that explicitly states the invisible trailer view https://www.shopchevyparts.com/chevrolet/2024/silverado-2500-hd/electronics/85825715-silverado-2500-trailer-camera-transparent-view-requires-trg-camera-provisions-p-92326971.html?sort=2a    
    • You didn't say what year it is. I have a '17 5.3 6l80e & used the Range AFM delete for a while to stay in V8 mode. Then I got a local tuner to preform a HPTune on my 6l80e & love it. He did a AFM delete, torque matching between engine & transmission, removed converter slip and mild engine tune that helps the transmission. Gears shift better, at specific speeds, no hunting for gear, no 2 gear down shifts, no spark plug miss feel. Drives like a different truck. I highly recommend it.
    • I know this old thread but I just replaced the left side engine mount on my 2018 5.3 2wd and it was a pain. A quick search showed that it was probably going to cost around $600 to $900 to get it replaced. I researched how to replace it and decided to do it myself being that I'm retired and have the time and tools. What should have taken a day took me 4 days plus a couple trips to my chiropractor and some blood. Why a mount failed at 150k miles is beyond me but such is life.   Peace  
    • ticked down about a dime this week. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...