Jump to content

Heated seats not working when using remote start

td33

By td33
in Troubleshooting & Recalls

 Share

Recommended Posts

Isriam Enthusiast

Isriam

Posted
Posted

I use the remote start everyday since I bought the truck. During the coldest days of winter or the hottest days of the summer the truck has never "automatically" turned on the HVAC while it was in remote start mode. Main reason I know why is during the summer months when I drive into work it is cool enough that I drive in with the windows down and the HVAC is turned off. When I come out to the truck while it is running under remote start mode the HVAC is not running at all.

 

I can tell you that since it got cold last week that while under remote start mode the heated seats were on and working.

 

I need to have the dealer look into the HVAC module. This summer I noticed while running the AC that if I pressed the button to turn the AC off but left the HVAC system on so that the fan could continue to blow air thru the vents that the AC never turned off. Air would stay just as cold as it was with the AC turned on. Tested this out for 30 minutes so I know it wasn't residual cold air from the internals of the vents. Then I would turn the HVAC off then back on and with in minutes the air would stop coming out cold and would come out at what ever the outside ambient temps are at the time.

 

Makes me wonder if I have a defective HVAC control module. I am going to have the dealer look into on the next oil change.

 

I also noticed AC did not work during remote start for me this summer as well. But I was surprised that when i had the system OFF, the heater was actually going when i remote started.

  • 2 months later...
  • Replies 43
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

TJay74
TJay74

In order for the HVAC heat to work you have to leave the HVAC system on in the mode you will want to be used when remote starting the truck. This system does not work like prior GM vehicles where the

Isriam
Isriam

I thought the same, until this winter. Go to your truck and crank with key, turn it to HI, sync, auto. Then hit the fan power button to turn the system "off". Turn off then remote start the truck.

skauffman New Member

skauffman

Posted
Posted

I have the same problem with my heated seats not coming on with remote start,, however I bought this truck last march, I live in a cold climate so I liked this option. Before my recalls which were instrument cluster,tran. And another one my seats worked like they were suppose to they were. Ice and warm with remotestart, now they don t come with it anymore. I have all my setting correct. The dealer can t explain it. Something in their program changed this option but I can't get any answers.

BigBadSierra Senior Enthusiast

BigBadSierra

Posted
Posted

Sit in the seat and remote start the truck the seat will heat up.

 

Some bright STAR at GM thought it would be a good idea for the heaters to only work if there is weight in the seats.

 

This is for sure a screw up on GM's part.

 

The same is true whenever you use them someone has to be in that seat.

thefishhawk Enthusiast

thefishhawk

Posted
Posted

I thought mine had the remote start not working issue for a long time, and then one day it was below zero and I had the time and actually let the truck run through both of the two remote start cycles, then I felt some warmth when I get in the seat. Not hot, but sorta warm. Without a butt in the seat they just don't get hot. and fwiw, my driver's seat I can't even use the high setting on, I get it started with that and turn it to low the rest of the time.

Basscat New Member

Basscat

Posted
Posted

Heated Seats are a problem. Just bought a new 15 All Terrain GMC SLT and you guys guessed it. Heated do not work with remote start or remote link. I am well versed in My Link and Intellink and I know the settings are correct. My 13 worked like it should on below zero days in Northern Mn. I hope GM can figure out the communication on the start feature to correct this. This is a

big deal for me. Any fixes out there

Green 1364 Enthusiast

Green 1364

Posted
Posted

From everything I've read I think the trucks with heated and cooled seats are the worst. I have heated and cooled and on high heat even after 1 hour of driving they barely get warm. Is everyone with heated and cooled having the same problem I am? Seems from what I read the heated only seats are much better.

Newell33 Enthusiast

Newell33

Posted
Posted

From everything I've read I think the trucks with heated and cooled seats are the worst. I have heated and cooled and on high heat even after 1 hour of driving they barely get warm. Is everyone with heated and cooled having the same problem I am? Seems from what I read the heated only seats are much better.

 

I don't have the cooled seat option, but my heated seats are just like everyone else's. Heated seats are nice for warming up the seats before the cabin is warm. If I run my truck through two remote start cycles, get in, and can barely tell if they're working, then the system is poorly designed. Like everyone else's, mine eventually warm up to a point where I have to turn them down. By this time, though, the cabin is fairly warm, and the heated seats aren't needed. I think this is one of those examples of "what were they thinking?" Some have mentioned liability issues as the reason. If that's the case then I think they could have found more of a happy medium. Based on the failure rate of the heating elements as noted on this board, I'm guessing the whole system was just poorly executed.

Green 1364 Enthusiast

Green 1364

Posted
Posted

I sent TJAY a message because he wrote there will be updates to the next radio update that may address this issue. Waiting on his reply.

Rme2513 Enthusiast

Rme2513

Posted
Posted

I have noticed if I use the key fob they do not come on but if I use the onstar app to remote start the truck they do come on have not really looked into it

DougOhio Enthusiast

DougOhio

Posted
Posted

Sit in the seat and remote start the truck the seat will heat up.

 

Some bright STAR at GM thought it would be a good idea for the heaters to only work if there is weight in the seats.

 

This is for sure a screw up on GM's part.

 

The same is true whenever you use them someone has to be in that seat.

sounds like a good use for that extra bowling ball...wish I had one!! I would be out there tonight setting my trap for tomorrow morning.
therink Enthusiast

therink

Posted
Posted

Last Friday it was a high of 1 F. After the truck sat for a while I used the remote start (2 cycles) and the seat was good and toasty when I sat on it. It does work with remote start. I have found that in the morning when truck is at its coldest it dies not appear to be warm but is just slow to warm from long term cold.

POS VETT Enthusiast

POS VETT

Posted
Posted

GM has experiences with seat covers overheating when heaters running without an occupant. So, now seat heaters in our truck won't go full power until there is certain weight placed on the seat.

ShotgunZ71 Senior Enthusiast

ShotgunZ71

Posted
Posted

I remember in 99, that the heaters wouldn't come on until the seat belt was latched, or something to that effect. Wonder if it's something similar with these seat warmers.

  • 5 years later...
derfsaint New Member

derfsaint

Posted
Posted

I may have looked a little strange to my neighbors, but here is what I did.  I let the car cool down completely in 30 degree weather. Then I went out, sat in it, locked the door, remote started it, and waited.  After about 5 minutes I felt heat coming from the seat and lower back...  Wasn't "hot" but it was warm.  I felt the passenger seat, and it was warmer that the back seats...  Conclusion, the seat heaters barely turn on when using the remote start, but they do turn on.  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      Well if you insist.
    • diyer2
      OCI, not when but why?

      By diyer2 · Posted

      You have to have the last word. 
    • Chuck FB
      summer road trips in the 2026 2500HD

      By Chuck FB · Posted

      I am sure that was quite the pass experience and not a great place to experience during the winter when the conditions are not good. I've seen video of that pass and also more detailed information and pictures about the wrecks at that one hair pin turn where tractor trailers have flown right off the cliff and I am sure from all the warning signs that you know the exact curve that was !. After all there is a reason why a song was made about Wolf Creek Pass !. By the way and I didn't realize this either when I bought my truck as its nothing I even thought of that would be programmed into the cruise control and this occurs in either the basic or the more advanced cruise that controls your distance behind a vehicle and that is the brakes going down a hill are being applied as soon as the vehicle goes a certain speed over the set cruise speed. While it certainly does force downshifts in the transmission as you found out with cruise on while going down hill, its also dragging the brakes as needed to keep the speed controlled to what the cruise was set to. For me, I find that unsettling simply because I have no concept then as to how MUCH brake input is being used a and just how hot are those brakes getting and the wear factor as well. I can see that system getting a person into trouble on long mountain grades while pulling a trailer as it would not only be standing on the brakes of the pickup without any driver input, it would also be automatically applying the trailer brakes and it could cause a run away unit by overheating the brakes. Its one thing on a shorter hill and if the driver allows it to do its thing but on a long mountain grade is where things could get so out of hand. As someone a while back on this forum said, they had someone following them at night I believe on a down grade and had the cruise set and the person behind them could see the brake lights being energized all the way down the hill. I figured when I saw your comment that you didn't know and would have no way of knowing that your truck was applying the brakes and that you would and rightfully so assume you only used the brakes when you pressed on the pedal to slow down more than the cruise set speed for the slower sharp curves. So its good knowledge to know this about the newer GM trucks, certainly when doing any descending on long mountain grades. In the future try kicking off the cruise and use the the manual mode on a pass to see what that is like as I know myself when I first experienced it I thought no way can this engine be holding me back this well and tried the same hill in manual mode and sure enough the engine was revving way up and still could not hold the trucks speed down like it could in cruise mode.    Fuel mileage, that is where a really low sleek type of car can do better at higher speeds, certainly it starts sucking fuel too but a tall pickup is pushing massive amounts of air and also allowing a lot more air under it and the tow mirrors as in elephant ears pushing through the wind  as well. Driving like grandpa is about as good as one can do when driving one of these if trying to get the best fuel economy they can. I bet these trucks would get the best mileage they can if driven on a freeway in Florida if not busy traffic at a sedate speed and that sea level elevation without hills, vastly different then Colorado !. 
    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      It’s over for almost 24 hours. Are you playing Eddie Haskell? 
    • diyer2
      OCI, not when but why?

      By diyer2 · Posted

      Again, really you two.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...